arm: Re-sync ARCH_MX5 / MX51 / MX53 CONFIG options
[platform/kernel/u-boot.git] / include / configs / mx53ard.h
1 /*
2  * Copyright (C) 2011 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the MX53ARD Freescale board.
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #define CONFIG_MACH_TYPE        MACH_TYPE_MX53_ARD
13
14 #include <asm/arch/imx-regs.h>
15
16 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
17 #define CONFIG_SETUP_MEMORY_TAGS
18 #define CONFIG_INITRD_TAG
19 #define CONFIG_REVISION_TAG
20
21 #define CONFIG_SYS_FSL_CLK
22
23 /* Size of malloc() pool */
24 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
25
26 #define CONFIG_MXC_GPIO
27
28 #define CONFIG_SYS_MAX_NAND_DEVICE      1
29 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
30 #define CONFIG_NAND_MXC
31 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
32 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
33 #define CONFIG_SYS_NAND_LARGEPAGE
34 #define CONFIG_MXC_NAND_HWECC
35 #define CONFIG_SYS_NAND_USE_FLASH_BBT
36 #define CONFIG_CMD_NAND
37
38 #define CONFIG_MXC_UART
39 #define CONFIG_MXC_UART_BASE    UART1_BASE
40
41 /* I2C Configs */
42 #define CONFIG_SYS_I2C
43 #define CONFIG_SYS_I2C_MXC
44 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
45 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
46 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
47
48 /* MMC Configs */
49 #define CONFIG_FSL_ESDHC
50 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
51 #define CONFIG_SYS_FSL_ESDHC_NUM        2
52
53 /* Eth Configs */
54 #define CONFIG_HAS_ETH1
55 #define CONFIG_MII
56
57 /* allow to overwrite serial and ethaddr */
58 #define CONFIG_ENV_OVERWRITE
59 #define CONFIG_CONS_INDEX               1
60
61 /* Command definition */
62
63 #define CONFIG_ETHPRIME         "smc911x"
64
65 /*Support LAN9217*/
66 #define CONFIG_SMC911X
67 #define CONFIG_SMC911X_16_BIT
68 #define CONFIG_SMC911X_BASE CS1_BASE_ADDR
69
70 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
71 #define CONFIG_SYS_TEXT_BASE    0x77800000
72
73 #define CONFIG_EXTRA_ENV_SETTINGS \
74         "script=boot.scr\0" \
75         "uimage=zImage\0" \
76         "console=ttymxc0\0" \
77         "fdt_high=0xffffffff\0" \
78         "initrd_high=0xffffffff\0" \
79         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
80         "fdt_addr=0x78000000\0" \
81         "boot_fdt=try\0" \
82         "ip_dyn=yes\0" \
83         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
84         "mmcpart=1\0" \
85         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
86         "update_sd_firmware_filename=u-boot.imx\0" \
87         "update_sd_firmware=" \
88                 "if test ${ip_dyn} = yes; then " \
89                         "setenv get_cmd dhcp; " \
90                 "else " \
91                         "setenv get_cmd tftp; " \
92                 "fi; " \
93                 "if mmc dev ${mmcdev}; then "   \
94                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
95                                 "setexpr fw_sz ${filesize} / 0x200; " \
96                                 "setexpr fw_sz ${fw_sz} + 1; "  \
97                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
98                         "fi; "  \
99                 "fi\0" \
100         "mmcargs=setenv bootargs console=${console},${baudrate} " \
101                 "root=${mmcroot}\0" \
102         "loadbootscript=" \
103                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
104         "bootscript=echo Running bootscript from mmc ...; " \
105                 "source\0" \
106         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
107         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
108         "mmcboot=echo Booting from mmc ...; " \
109                 "run mmcargs; " \
110                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
111                         "if run loadfdt; then " \
112                                 "bootz ${loadaddr} - ${fdt_addr}; " \
113                         "else " \
114                                 "if test ${boot_fdt} = try; then " \
115                                         "bootz; " \
116                                 "else " \
117                                         "echo WARN: Cannot load the DT; " \
118                                 "fi; " \
119                         "fi; " \
120                 "else " \
121                         "bootz; " \
122                 "fi;\0" \
123         "netargs=setenv bootargs console=${console},${baudrate} " \
124                 "root=/dev/nfs " \
125         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
126                 "netboot=echo Booting from net ...; " \
127                 "run netargs; " \
128                 "if test ${ip_dyn} = yes; then " \
129                         "setenv get_cmd dhcp; " \
130                 "else " \
131                         "setenv get_cmd tftp; " \
132                 "fi; " \
133                 "${get_cmd} ${uimage}; " \
134                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
135                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
136                                 "bootz ${loadaddr} - ${fdt_addr}; " \
137                         "else " \
138                                 "if test ${boot_fdt} = try; then " \
139                                         "bootz; " \
140                                 "else " \
141                                         "echo WARN: Cannot load the DT; " \
142                                 "fi; " \
143                         "fi; " \
144                 "else " \
145                         "bootz; " \
146                 "fi;\0"
147
148 #define CONFIG_BOOTCOMMAND \
149            "mmc dev ${mmcdev}; if mmc rescan; then " \
150                    "if run loadbootscript; then " \
151                            "run bootscript; " \
152                    "else " \
153                            "if run loaduimage; then " \
154                                    "run mmcboot; " \
155                            "else run netboot; " \
156                            "fi; " \
157                    "fi; " \
158            "else run netboot; fi"
159
160 #define CONFIG_ARP_TIMEOUT      200UL
161
162 /* Miscellaneous configurable options */
163 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
164 #define CONFIG_AUTO_COMPLETE
165 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
166
167 /* Print Buffer Size */
168 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
169 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
170 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
171
172 #define CONFIG_SYS_MEMTEST_START       0x70000000
173 #define CONFIG_SYS_MEMTEST_END         0x70010000
174
175 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
176
177 #define CONFIG_CMDLINE_EDITING
178
179 /* Physical Memory Map */
180 #define CONFIG_NR_DRAM_BANKS    2
181 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
182 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
183 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
184 #define PHYS_SDRAM_2_SIZE       (512 * 1024 * 1024)
185 #define PHYS_SDRAM_SIZE         (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
186
187 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
188 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
189 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
190
191 #define CONFIG_SYS_INIT_SP_OFFSET \
192         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
193 #define CONFIG_SYS_INIT_SP_ADDR \
194         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
195
196 /* environment organization */
197 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
198 #define CONFIG_ENV_SIZE        (8 * 1024)
199 #define CONFIG_ENV_IS_IN_MMC
200 #define CONFIG_SYS_MMC_ENV_DEV  0
201
202 #define MX53ARD_CS1GCR1         (CSEN | DSZ(2))
203 #define MX53ARD_CS1RCR1         (RCSN(2) | OEN (1) | RWSC(22))
204 #define MX53ARD_CS1RCR2         RBEN(2)
205 #define MX53ARD_CS1WCR1         (WCSN(2) | WEN(2) | WBEN(2) | WWSC(22))
206
207 #endif                          /* __CONFIG_H */