Merge branch 'master' of git://git.denx.de/u-boot-arm
[platform/kernel/u-boot.git] / include / configs / mx53ard.h
1 /*
2  * Copyright (C) 2011 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the MX53ARD Freescale board.
5  *
6  * SPDX-License-Identifier:     GPL-2.0+ 
7  */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #define CONFIG_MX53
13
14 #define CONFIG_DISPLAY_CPUINFO
15 #define CONFIG_DISPLAY_BOARDINFO
16
17 #define CONFIG_MACH_TYPE        MACH_TYPE_MX53_ARD
18
19 #include <asm/arch/imx-regs.h>
20
21 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
22 #define CONFIG_SETUP_MEMORY_TAGS
23 #define CONFIG_INITRD_TAG
24 #define CONFIG_REVISION_TAG
25
26 /* Size of malloc() pool */
27 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
28
29 #define CONFIG_BOARD_EARLY_INIT_F
30 #define CONFIG_MXC_GPIO
31
32 #define CONFIG_SYS_MAX_NAND_DEVICE      1
33 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
34 #define CONFIG_NAND_MXC
35 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
36 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
37 #define CONFIG_SYS_NAND_LARGEPAGE
38 #define CONFIG_MXC_NAND_HWECC
39 #define CONFIG_SYS_NAND_USE_FLASH_BBT
40 #define CONFIG_CMD_NAND
41
42 #define CONFIG_MXC_UART
43 #define CONFIG_MXC_UART_BASE    UART1_BASE
44
45 /* I2C Configs */
46 #define CONFIG_CMD_I2C
47 #define CONFIG_HARD_I2C
48 #define CONFIG_I2C_MXC
49 #define CONFIG_SYS_I2C_BASE             I2C2_BASE_ADDR
50 #define CONFIG_SYS_I2C_SPEED            100000
51
52 /* MMC Configs */
53 #define CONFIG_FSL_ESDHC
54 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
55 #define CONFIG_SYS_FSL_ESDHC_NUM        2
56
57 #define CONFIG_MMC
58 #define CONFIG_CMD_MMC
59 #define CONFIG_GENERIC_MMC
60 #define CONFIG_CMD_FAT
61 #define CONFIG_DOS_PARTITION
62
63 /* Eth Configs */
64 #define CONFIG_HAS_ETH1
65 #define CONFIG_MII
66
67 #define CONFIG_CMD_PING
68 #define CONFIG_CMD_DHCP
69 #define CONFIG_CMD_MII
70 #define CONFIG_CMD_NET
71
72 /* allow to overwrite serial and ethaddr */
73 #define CONFIG_ENV_OVERWRITE
74 #define CONFIG_CONS_INDEX               1
75 #define CONFIG_BAUDRATE                 115200
76
77 /* Command definition */
78 #include <config_cmd_default.h>
79
80 #undef CONFIG_CMD_IMLS
81 #define CONFIG_CMD_SETEXPR
82
83 #define CONFIG_BOOTDELAY        3
84
85 #define CONFIG_ETHPRIME         "smc911x"
86
87 /*Support LAN9217*/
88 #define CONFIG_SMC911X
89 #define CONFIG_SMC911X_16_BIT
90 #define CONFIG_SMC911X_BASE CS1_BASE_ADDR
91
92 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
93 #define CONFIG_SYS_TEXT_BASE    0x77800000
94
95 #define CONFIG_DEFAULT_FDT_FILE         "imx53-ard.dtb"
96
97 #define CONFIG_EXTRA_ENV_SETTINGS \
98         "script=boot.scr\0" \
99         "uimage=uImage\0" \
100         "console=ttymxc0\0" \
101         "fdt_high=0xffffffff\0" \
102         "initrd_high=0xffffffff\0" \
103         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
104         "fdt_addr=0x71000000\0" \
105         "boot_fdt=try\0" \
106         "ip_dyn=yes\0" \
107         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
108         "mmcpart=1\0" \
109         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
110         "update_sd_firmware_filename=u-boot.imx\0" \
111         "update_sd_firmware=" \
112                 "if test ${ip_dyn} = yes; then " \
113                         "setenv get_cmd dhcp; " \
114                 "else " \
115                         "setenv get_cmd tftp; " \
116                 "fi; " \
117                 "if mmc dev ${mmcdev}; then "   \
118                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
119                                 "setexpr fw_sz ${filesize} / 0x200; " \
120                                 "setexpr fw_sz ${fw_sz} + 1; "  \
121                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
122                         "fi; "  \
123                 "fi\0" \
124         "mmcargs=setenv bootargs console=${console},${baudrate} " \
125                 "root=${mmcroot}\0" \
126         "loadbootscript=" \
127                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
128         "bootscript=echo Running bootscript from mmc ...; " \
129                 "source\0" \
130         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
131         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
132         "mmcboot=echo Booting from mmc ...; " \
133                 "run mmcargs; " \
134                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
135                         "if run loadfdt; then " \
136                                 "bootm ${loadaddr} - ${fdt_addr}; " \
137                         "else " \
138                                 "if test ${boot_fdt} = try; then " \
139                                         "bootm; " \
140                                 "else " \
141                                         "echo WARN: Cannot load the DT; " \
142                                 "fi; " \
143                         "fi; " \
144                 "else " \
145                         "bootm; " \
146                 "fi;\0" \
147         "netargs=setenv bootargs console=${console},${baudrate} " \
148                 "root=/dev/nfs " \
149         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
150                 "netboot=echo Booting from net ...; " \
151                 "run netargs; " \
152                 "if test ${ip_dyn} = yes; then " \
153                         "setenv get_cmd dhcp; " \
154                 "else " \
155                         "setenv get_cmd tftp; " \
156                 "fi; " \
157                 "${get_cmd} ${uimage}; " \
158                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
159                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
160                                 "bootm ${loadaddr} - ${fdt_addr}; " \
161                         "else " \
162                                 "if test ${boot_fdt} = try; then " \
163                                         "bootm; " \
164                                 "else " \
165                                         "echo WARN: Cannot load the DT; " \
166                                 "fi; " \
167                         "fi; " \
168                 "else " \
169                         "bootm; " \
170                 "fi;\0"
171
172 #define CONFIG_BOOTCOMMAND \
173            "mmc dev ${mmcdev}; if mmc rescan; then " \
174                    "if run loadbootscript; then " \
175                            "run bootscript; " \
176                    "else " \
177                            "if run loaduimage; then " \
178                                    "run mmcboot; " \
179                            "else run netboot; " \
180                            "fi; " \
181                    "fi; " \
182            "else run netboot; fi"
183
184 #define CONFIG_ARP_TIMEOUT      200UL
185
186 /* Miscellaneous configurable options */
187 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
188 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
189 #define CONFIG_SYS_PROMPT               "MX53ARD U-Boot > "
190 #define CONFIG_AUTO_COMPLETE
191 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
192
193 /* Print Buffer Size */
194 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
195 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
196 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
197
198 #define CONFIG_SYS_MEMTEST_START       0x70000000
199 #define CONFIG_SYS_MEMTEST_END         0x70010000
200
201 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
202
203 #define CONFIG_SYS_HZ           1000
204 #define CONFIG_CMDLINE_EDITING
205
206 /* Physical Memory Map */
207 #define CONFIG_NR_DRAM_BANKS    2
208 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
209 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
210 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
211 #define PHYS_SDRAM_2_SIZE       (512 * 1024 * 1024)
212 #define PHYS_SDRAM_SIZE         (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
213
214 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
215 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
216 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
217
218 #define CONFIG_SYS_INIT_SP_OFFSET \
219         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
220 #define CONFIG_SYS_INIT_SP_ADDR \
221         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
222
223 /* FLASH and environment organization */
224 #define CONFIG_SYS_NO_FLASH
225
226 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
227 #define CONFIG_ENV_SIZE        (8 * 1024)
228 #define CONFIG_ENV_IS_IN_MMC
229 #define CONFIG_SYS_MMC_ENV_DEV  0
230
231 #define CONFIG_OF_LIBFDT
232
233 #define MX53ARD_CS1GCR1         (CSEN | DSZ(2))
234 #define MX53ARD_CS1RCR1         (RCSN(2) | OEN (1) | RWSC(22))
235 #define MX53ARD_CS1RCR2         RBEN(2)
236 #define MX53ARD_CS1WCR1         (WCSN(2) | WEN(2) | WBEN(2) | WWSC(22))
237
238 #endif                          /* __CONFIG_H */