include/configs/mx35pdk.h

   1 /*
   2  * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
   3  *
   4  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   5  *
   6  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   7  *
   8  * Configuration for the MX35pdk Freescale board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18  /* High Level Configuration Options */
  19 #define CONFIG_MX35
  20
  21 #define CONFIG_SYS_FSL_CLK
  22
  23 /* Set TEXT at the beginning of the NOR flash */
  24 #define CONFIG_SYS_TEXT_BASE    0xA0000000
  25
  26 #define CONFIG_BOARD_EARLY_INIT_F
  27
  28 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  29 #define CONFIG_REVISION_TAG
  30 #define CONFIG_SETUP_MEMORY_TAGS
  31 #define CONFIG_INITRD_TAG
  32
  33 /*
  34  * Size of malloc() pool
  35  */
  36 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  37
  38 /*
  39  * Hardware drivers
  40  */
  41 #define CONFIG_SYS_I2C
  42 #define CONFIG_SYS_I2C_MXC
  43 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  44 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  45 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  46 #define CONFIG_MXC_SPI
  47 #define CONFIG_MXC_GPIO
  48
  49 /*
  50  * PMIC Configs
  51  */
  52 #define CONFIG_POWER
  53 #define CONFIG_POWER_I2C
  54 #define CONFIG_POWER_FSL
  55 #define CONFIG_POWER_FSL_MC13892
  56 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x08
  57 #define CONFIG_RTC_MC13XXX
  58
  59 /*
  60  * MFD MC9SDZ60
  61  */
  62 #define CONFIG_FSL_MC9SDZ60
  63 #define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR        0x69
  64
  65 /*
  66  * UART (console)
  67  */
  68 #define CONFIG_MXC_UART
  69 #define CONFIG_MXC_UART_BASE    UART1_BASE
  70
  71 /* allow to overwrite serial and ethaddr */
  72 #define CONFIG_ENV_OVERWRITE
  73 #define CONFIG_CONS_INDEX       1
  74 #define CONFIG_BAUDRATE         115200
  75
  76 /*
  77  * Command definition
  78  */
  79 #define CONFIG_BOOTP_SUBNETMASK
  80 #define CONFIG_BOOTP_GATEWAY
  81 #define CONFIG_BOOTP_DNS
  82
  83 #define CONFIG_CMD_NAND
  84
  85 #define CONFIG_NET_RETRY_COUNT  100
  86 #define CONFIG_CMD_DATE
  87
  88 #define CONFIG_DOS_PARTITION
  89 #define CONFIG_EFI_PARTITION
  90
  91
  92 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
  93
  94 /*
  95  * Ethernet on the debug board (SMC911)
  96  */
  97 #define CONFIG_SMC911X
  98 #define CONFIG_SMC911X_16_BIT 1
  99 #define CONFIG_SMC911X_BASE CS5_BASE_ADDR
 100
 101 #define CONFIG_HAS_ETH1
 102 #define CONFIG_ETHPRIME
 103
 104 /*
 105  * Ethernet on SOC (FEC)
 106  */
 107 #define CONFIG_FEC_MXC
 108 #define IMX_FEC_BASE    FEC_BASE_ADDR
 109 #define CONFIG_FEC_MXC_PHYADDR  0x1F
 110
 111 #define CONFIG_MII
 112
 113 #define CONFIG_ARP_TIMEOUT      200UL
 114
 115 /*
 116  * Miscellaneous configurable options
 117  */
 118 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 119 #define CONFIG_CMDLINE_EDITING
 120
 121 #define CONFIG_AUTO_COMPLETE
 122 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 123 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 124 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 125
 126 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
 127 #define CONFIG_SYS_MEMTEST_END          0x10000
 128
 129 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 130
 131 /*
 132  * Physical Memory Map
 133  */
 134 #define CONFIG_NR_DRAM_BANKS    2
 135 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 136 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 137 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
 138 #define PHYS_SDRAM_2_SIZE       (128 * 1024 * 1024)
 139
 140 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
 141 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR + 0x10000)
 142 #define CONFIG_SYS_INIT_RAM_SIZE                (IRAM_SIZE / 2)
 143 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 144                                         GENERATED_GBL_DATA_SIZE)
 145 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 146                                         CONFIG_SYS_GBL_DATA_OFFSET)
 147
 148 /*
 149  * MTD Command for mtdparts
 150  */
 151 #define CONFIG_CMD_MTDPARTS
 152 #define CONFIG_MTD_DEVICE
 153 #define CONFIG_FLASH_CFI_MTD
 154 #define CONFIG_MTD_PARTITIONS
 155 #define MTDIDS_DEFAULT          "nand0=mxc_nand,nor0=physmap-flash.0"
 156 #define MTDPARTS_DEFAULT        "mtdparts=mxc_nand:1m(boot),5m(linux)," \
 157                                 "96m(root),8m(cfg),1938m(user);"        \
 158                                 "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"
 159
 160 /*
 161  * FLASH and environment organization
 162  */
 163 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 164 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 165 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 166 /* Monitor at beginning of flash */
 167 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 168 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 169
 170 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 171 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 172
 173 /* Address and size of Redundant Environment Sector     */
 174 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 175 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 176
 177 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 178                                 CONFIG_SYS_MONITOR_LEN)
 179
 180 #define CONFIG_ENV_IS_IN_FLASH
 181
 182 #if defined(CONFIG_FSL_ENV_IN_NAND)
 183         #define CONFIG_ENV_IS_IN_NAND
 184         #define CONFIG_ENV_OFFSET       (1024 * 1024)
 185 #endif
 186
 187 /*
 188  * CFI FLASH driver setup
 189  */
 190 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
 191 #define CONFIG_FLASH_CFI_DRIVER
 192
 193 /* A non-standard buffered write algorithm */
 194 #define CONFIG_FLASH_SPANSION_S29WS_N
 195 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* faster */
 196 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
 197
 198 /*
 199  * NAND FLASH driver setup
 200  */
 201 #define CONFIG_NAND_MXC
 202 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 203 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 204 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 205 #define CONFIG_MXC_NAND_HWECC
 206 #define CONFIG_SYS_NAND_LARGEPAGE
 207
 208 /* EHCI driver */
 209 #define CONFIG_USB_EHCI
 210 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      1
 211 #define CONFIG_EHCI_IS_TDI
 212 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 213 #define CONFIG_USB_EHCI_MXC
 214 #define CONFIG_MXC_USB_PORT     0
 215 #define CONFIG_MXC_USB_FLAGS    (MXC_EHCI_INTERFACE_DIFF_UNI | \
 216                                  MXC_EHCI_POWER_PINS_ENABLED | \
 217                                  MXC_EHCI_OC_PIN_ACTIVE_LOW)
 218 #define CONFIG_MXC_USB_PORTSC   (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
 219
 220 /* mmc driver */
 221 #define CONFIG_GENERIC_MMC
 222 #define CONFIG_FSL_ESDHC
 223 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 224 #define CONFIG_SYS_FSL_ESDHC_NUM        1
 225
 226 /*
 227  * Default environment and default scripts
 228  * to update uboot and load kernel
 229  */
 230
 231 #define CONFIG_HOSTNAME "mx35pdk"
 232 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 233         "netdev=eth1\0"                                                 \
 234         "ethprime=smc911x\0"                                            \
 235         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 236                 "nfsroot=${serverip}:${rootpath}\0"                     \
 237         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 238         "addip_sta=setenv bootargs ${bootargs} "                        \
 239                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 240                 ":${hostname}:${netdev}:off panic=1\0"                  \
 241         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 242         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 243                 "else run addip_sta;fi\0"                               \
 244         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 245         "addtty=setenv bootargs ${bootargs}"                            \
 246                 " console=ttymxc0,${baudrate}\0"                        \
 247         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 248         "loadaddr=80800000\0"                                           \
 249         "kernel_addr_r=80800000\0"                                      \
 250         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 251         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 252         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
 253         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 254                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 255         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 256                 "bootm ${kernel_addr}\0"                                \
 257         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 258                 "run nfsargs addip addtty addmtd addmisc;"              \
 259                 "bootm ${kernel_addr_r}\0"                              \
 260         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 261                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 262         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 263         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 264         "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
 265         "update=protect off ${uboot_addr} +80000;"                      \
 266                 "erase ${uboot_addr} +80000;"                           \
 267                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 268         "upd=if run load;then echo Updating u-boot;if run update;"      \
 269                 "then echo U-Boot updated;"                             \
 270                         "else echo Error updating u-boot !;"            \
 271                         "echo Board without bootloader !!;"             \
 272                 "fi;"                                                   \
 273                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 274         "bootcmd=run net_nfs\0"
 275
 276 #endif                          /* __CONFIG_H */