1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
5 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
7 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
9 * Configuration for the MX35pdk Freescale board.
15 #include <asm/arch/imx-regs.h>
17 /* High Level Configuration Options */
20 #define CONFIG_SYS_FSL_CLK
22 /* Set TEXT at the beginning of the NOR flash */
24 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
25 #define CONFIG_REVISION_TAG
26 #define CONFIG_SETUP_MEMORY_TAGS
27 #define CONFIG_INITRD_TAG
30 * Size of malloc() pool
32 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
37 #define CONFIG_SYS_I2C
38 #define CONFIG_SYS_I2C_MXC
39 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
40 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
41 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
47 #define CONFIG_POWER_I2C
48 #define CONFIG_POWER_FSL
49 #define CONFIG_POWER_FSL_MC13892
50 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08
51 #define CONFIG_RTC_MC13XXX
56 #define CONFIG_FSL_MC9SDZ60
57 #define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR 0x69
62 #define CONFIG_MXC_UART_BASE UART1_BASE
68 #define CONFIG_NET_RETRY_COUNT 100
71 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
74 * Ethernet on the debug board (SMC911)
76 #define CONFIG_HAS_ETH1
77 #define CONFIG_ETHPRIME
80 * Ethernet on SOC (FEC)
82 #define CONFIG_FEC_MXC
83 #define IMX_FEC_BASE FEC_BASE_ADDR
84 #define CONFIG_FEC_MXC_PHYADDR 0x1F
86 #define CONFIG_ARP_TIMEOUT 200UL
89 * Miscellaneous configurable options
92 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
97 #define PHYS_SDRAM_1 CSD0_BASE_ADDR
98 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
99 #define PHYS_SDRAM_2 CSD1_BASE_ADDR
100 #define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024)
102 #define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
103 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000)
104 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2)
105 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
106 GENERATED_GBL_DATA_SIZE)
107 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
108 CONFIG_SYS_GBL_DATA_OFFSET)
111 * MTD Command for mtdparts
115 * FLASH and environment organization
117 #define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
118 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
119 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
120 /* Monitor at beginning of flash */
121 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
122 #define CONFIG_SYS_MONITOR_LEN (512 * 1024)
124 /* Address and size of Redundant Environment Sector */
127 * CFI FLASH driver setup
130 /* A non-standard buffered write algorithm */
131 #define CONFIG_FLASH_SPANSION_S29WS_N
134 * NAND FLASH driver setup
136 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
137 #define CONFIG_SYS_MAX_NAND_DEVICE 1
138 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
139 #define CONFIG_MXC_NAND_HWECC
140 #define CONFIG_SYS_NAND_LARGEPAGE
143 #define CONFIG_EHCI_IS_TDI
144 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
145 #define CONFIG_USB_EHCI_MXC
146 #define CONFIG_MXC_USB_PORT 0
147 #define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \
148 MXC_EHCI_POWER_PINS_ENABLED | \
149 MXC_EHCI_OC_PIN_ACTIVE_LOW)
150 #define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
153 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
154 #define CONFIG_SYS_FSL_ESDHC_NUM 1
157 * Default environment and default scripts
158 * to update uboot and load kernel
161 #define CONFIG_HOSTNAME "mx35pdk"
162 #define CONFIG_EXTRA_ENV_SETTINGS \
164 "ethprime=smc911x\0" \
165 "nfsargs=setenv bootargs root=/dev/nfs rw " \
166 "nfsroot=${serverip}:${rootpath}\0" \
167 "ramargs=setenv bootargs root=/dev/ram rw\0" \
168 "addip_sta=setenv bootargs ${bootargs} " \
169 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
170 ":${hostname}:${netdev}:off panic=1\0" \
171 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
172 "addip=if test -n ${ipdyn};then run addip_dyn;" \
173 "else run addip_sta;fi\0" \
174 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
175 "addtty=setenv bootargs ${bootargs}" \
176 " console=ttymxc0,${baudrate}\0" \
177 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
178 "loadaddr=80800000\0" \
179 "kernel_addr_r=80800000\0" \
180 "hostname=" CONFIG_HOSTNAME "\0" \
181 "bootfile=" CONFIG_HOSTNAME "/uImage\0" \
182 "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0" \
183 "flash_self=run ramargs addip addtty addmtd addmisc;" \
184 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
185 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
186 "bootm ${kernel_addr}\0" \
187 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
188 "run nfsargs addip addtty addmtd addmisc;" \
189 "bootm ${kernel_addr_r}\0" \
190 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
191 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
192 "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \
193 "load=tftp ${loadaddr} ${u-boot}\0" \
194 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
195 "update=protect off ${uboot_addr} +80000;" \
196 "erase ${uboot_addr} +80000;" \
197 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
198 "upd=if run load;then echo Updating u-boot;if run update;" \
199 "then echo U-Boot updated;" \
200 "else echo Error updating u-boot !;" \
201 "echo Board without bootloader !!;" \
203 "else echo U-Boot not downloaded..exiting;fi\0" \
204 "bootcmd=run net_nfs\0"
206 #endif /* __CONFIG_H */