include/configs/mx35pdk.h

   1 /*
   2  * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
   3  *
   4  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   5  *
   6  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   7  *
   8  * Configuration for the MX35pdk Freescale board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18  /* High Level Configuration Options */
  19 #define CONFIG_MX35
  20
  21 #define CONFIG_SYS_FSL_CLK
  22
  23 /* Set TEXT at the beginning of the NOR flash */
  24 #define CONFIG_SYS_TEXT_BASE    0xA0000000
  25
  26 #define CONFIG_BOARD_EARLY_INIT_F
  27 #define CONFIG_BOARD_LATE_INIT
  28
  29 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  30 #define CONFIG_REVISION_TAG
  31 #define CONFIG_SETUP_MEMORY_TAGS
  32 #define CONFIG_INITRD_TAG
  33
  34 /*
  35  * Size of malloc() pool
  36  */
  37 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  38
  39 /*
  40  * Hardware drivers
  41  */
  42 #define CONFIG_SYS_I2C
  43 #define CONFIG_SYS_I2C_MXC
  44 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  45 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  46 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  47 #define CONFIG_MXC_SPI
  48 #define CONFIG_MXC_GPIO
  49
  50 /*
  51  * PMIC Configs
  52  */
  53 #define CONFIG_POWER
  54 #define CONFIG_POWER_I2C
  55 #define CONFIG_POWER_FSL
  56 #define CONFIG_POWER_FSL_MC13892
  57 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x08
  58 #define CONFIG_RTC_MC13XXX
  59
  60 /*
  61  * MFD MC9SDZ60
  62  */
  63 #define CONFIG_FSL_MC9SDZ60
  64 #define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR        0x69
  65
  66 /*
  67  * UART (console)
  68  */
  69 #define CONFIG_MXC_UART
  70 #define CONFIG_MXC_UART_BASE    UART1_BASE
  71
  72 /* allow to overwrite serial and ethaddr */
  73 #define CONFIG_ENV_OVERWRITE
  74 #define CONFIG_CONS_INDEX       1
  75 #define CONFIG_BAUDRATE         115200
  76
  77 /*
  78  * Command definition
  79  */
  80 #define CONFIG_BOOTP_SUBNETMASK
  81 #define CONFIG_BOOTP_GATEWAY
  82 #define CONFIG_BOOTP_DNS
  83
  84 #define CONFIG_CMD_NAND
  85
  86 #define CONFIG_NET_RETRY_COUNT  100
  87 #define CONFIG_CMD_DATE
  88
  89 #define CONFIG_DOS_PARTITION
  90 #define CONFIG_EFI_PARTITION
  91
  92
  93 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
  94
  95 /*
  96  * Ethernet on the debug board (SMC911)
  97  */
  98 #define CONFIG_SMC911X
  99 #define CONFIG_SMC911X_16_BIT 1
 100 #define CONFIG_SMC911X_BASE CS5_BASE_ADDR
 101
 102 #define CONFIG_HAS_ETH1
 103 #define CONFIG_ETHPRIME
 104
 105 /*
 106  * Ethernet on SOC (FEC)
 107  */
 108 #define CONFIG_FEC_MXC
 109 #define IMX_FEC_BASE    FEC_BASE_ADDR
 110 #define CONFIG_FEC_MXC_PHYADDR  0x1F
 111
 112 #define CONFIG_MII
 113
 114 #define CONFIG_ARP_TIMEOUT      200UL
 115
 116 /*
 117  * Miscellaneous configurable options
 118  */
 119 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 120 #define CONFIG_CMDLINE_EDITING
 121
 122 #define CONFIG_AUTO_COMPLETE
 123 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 124 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 125 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 126
 127 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
 128 #define CONFIG_SYS_MEMTEST_END          0x10000
 129
 130 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 131
 132 /*
 133  * Physical Memory Map
 134  */
 135 #define CONFIG_NR_DRAM_BANKS    2
 136 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 137 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 138 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
 139 #define PHYS_SDRAM_2_SIZE       (128 * 1024 * 1024)
 140
 141 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
 142 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR + 0x10000)
 143 #define CONFIG_SYS_INIT_RAM_SIZE                (IRAM_SIZE / 2)
 144 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 145                                         GENERATED_GBL_DATA_SIZE)
 146 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 147                                         CONFIG_SYS_GBL_DATA_OFFSET)
 148
 149 /*
 150  * MTD Command for mtdparts
 151  */
 152 #define CONFIG_CMD_MTDPARTS
 153 #define CONFIG_MTD_DEVICE
 154 #define CONFIG_FLASH_CFI_MTD
 155 #define CONFIG_MTD_PARTITIONS
 156 #define MTDIDS_DEFAULT          "nand0=mxc_nand,nor0=physmap-flash.0"
 157 #define MTDPARTS_DEFAULT        "mtdparts=mxc_nand:1m(boot),5m(linux)," \
 158                                 "96m(root),8m(cfg),1938m(user);"        \
 159                                 "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"
 160
 161 /*
 162  * FLASH and environment organization
 163  */
 164 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 165 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 166 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 167 /* Monitor at beginning of flash */
 168 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 169 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 170
 171 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 172 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 173
 174 /* Address and size of Redundant Environment Sector     */
 175 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 176 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 177
 178 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 179                                 CONFIG_SYS_MONITOR_LEN)
 180
 181 #define CONFIG_ENV_IS_IN_FLASH
 182
 183 #if defined(CONFIG_FSL_ENV_IN_NAND)
 184         #define CONFIG_ENV_IS_IN_NAND
 185         #define CONFIG_ENV_OFFSET       (1024 * 1024)
 186 #endif
 187
 188 /*
 189  * CFI FLASH driver setup
 190  */
 191 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
 192 #define CONFIG_FLASH_CFI_DRIVER
 193
 194 /* A non-standard buffered write algorithm */
 195 #define CONFIG_FLASH_SPANSION_S29WS_N
 196 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* faster */
 197 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
 198
 199 /*
 200  * NAND FLASH driver setup
 201  */
 202 #define CONFIG_NAND_MXC
 203 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 204 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 205 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 206 #define CONFIG_MXC_NAND_HWECC
 207 #define CONFIG_SYS_NAND_LARGEPAGE
 208
 209 /* EHCI driver */
 210 #define CONFIG_USB_EHCI
 211 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      1
 212 #define CONFIG_EHCI_IS_TDI
 213 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 214 #define CONFIG_USB_EHCI_MXC
 215 #define CONFIG_MXC_USB_PORT     0
 216 #define CONFIG_MXC_USB_FLAGS    (MXC_EHCI_INTERFACE_DIFF_UNI | \
 217                                  MXC_EHCI_POWER_PINS_ENABLED | \
 218                                  MXC_EHCI_OC_PIN_ACTIVE_LOW)
 219 #define CONFIG_MXC_USB_PORTSC   (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
 220
 221 /* mmc driver */
 222 #define CONFIG_GENERIC_MMC
 223 #define CONFIG_FSL_ESDHC
 224 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 225 #define CONFIG_SYS_FSL_ESDHC_NUM        1
 226
 227 /*
 228  * Default environment and default scripts
 229  * to update uboot and load kernel
 230  */
 231
 232 #define CONFIG_HOSTNAME "mx35pdk"
 233 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 234         "netdev=eth1\0"                                                 \
 235         "ethprime=smc911x\0"                                            \
 236         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 237                 "nfsroot=${serverip}:${rootpath}\0"                     \
 238         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 239         "addip_sta=setenv bootargs ${bootargs} "                        \
 240                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 241                 ":${hostname}:${netdev}:off panic=1\0"                  \
 242         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 243         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 244                 "else run addip_sta;fi\0"                               \
 245         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 246         "addtty=setenv bootargs ${bootargs}"                            \
 247                 " console=ttymxc0,${baudrate}\0"                        \
 248         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 249         "loadaddr=80800000\0"                                           \
 250         "kernel_addr_r=80800000\0"                                      \
 251         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 252         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 253         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
 254         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 255                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 256         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 257                 "bootm ${kernel_addr}\0"                                \
 258         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 259                 "run nfsargs addip addtty addmtd addmisc;"              \
 260                 "bootm ${kernel_addr_r}\0"                              \
 261         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 262                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 263         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 264         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 265         "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
 266         "update=protect off ${uboot_addr} +80000;"                      \
 267                 "erase ${uboot_addr} +80000;"                           \
 268                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 269         "upd=if run load;then echo Updating u-boot;if run update;"      \
 270                 "then echo U-Boot updated;"                             \
 271                         "else echo Error updating u-boot !;"            \
 272                         "echo Board without bootloader !!;"             \
 273                 "fi;"                                                   \
 274                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 275         "bootcmd=run net_nfs\0"
 276
 277 #endif                          /* __CONFIG_H */