include/configs/mx35pdk.h

   1 /*
   2  * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
   3  *
   4  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   5  *
   6  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   7  *
   8  * Configuration for the MX35pdk Freescale board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18  /* High Level Configuration Options */
  19 #define CONFIG_MX35
  20
  21 #define CONFIG_SYS_FSL_CLK
  22
  23 /* Set TEXT at the beginning of the NOR flash */
  24 #define CONFIG_SYS_TEXT_BASE    0xA0000000
  25
  26 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  27 #define CONFIG_REVISION_TAG
  28 #define CONFIG_SETUP_MEMORY_TAGS
  29 #define CONFIG_INITRD_TAG
  30
  31 /*
  32  * Size of malloc() pool
  33  */
  34 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  35
  36 /*
  37  * Hardware drivers
  38  */
  39 #define CONFIG_SYS_I2C
  40 #define CONFIG_SYS_I2C_MXC
  41 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  42 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  43 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  44 #define CONFIG_MXC_SPI
  45 #define CONFIG_MXC_GPIO
  46
  47 /*
  48  * PMIC Configs
  49  */
  50 #define CONFIG_POWER
  51 #define CONFIG_POWER_I2C
  52 #define CONFIG_POWER_FSL
  53 #define CONFIG_POWER_FSL_MC13892
  54 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x08
  55 #define CONFIG_RTC_MC13XXX
  56
  57 /*
  58  * MFD MC9SDZ60
  59  */
  60 #define CONFIG_FSL_MC9SDZ60
  61 #define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR        0x69
  62
  63 /*
  64  * UART (console)
  65  */
  66 #define CONFIG_MXC_UART
  67 #define CONFIG_MXC_UART_BASE    UART1_BASE
  68
  69 /* allow to overwrite serial and ethaddr */
  70 #define CONFIG_ENV_OVERWRITE
  71 #define CONFIG_CONS_INDEX       1
  72
  73 /*
  74  * Command definition
  75  */
  76 #define CONFIG_BOOTP_SUBNETMASK
  77 #define CONFIG_BOOTP_GATEWAY
  78 #define CONFIG_BOOTP_DNS
  79
  80 #define CONFIG_CMD_NAND
  81
  82 #define CONFIG_NET_RETRY_COUNT  100
  83
  84
  85 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
  86
  87 /*
  88  * Ethernet on the debug board (SMC911)
  89  */
  90 #define CONFIG_SMC911X
  91 #define CONFIG_SMC911X_16_BIT 1
  92 #define CONFIG_SMC911X_BASE CS5_BASE_ADDR
  93
  94 #define CONFIG_HAS_ETH1
  95 #define CONFIG_ETHPRIME
  96
  97 /*
  98  * Ethernet on SOC (FEC)
  99  */
 100 #define CONFIG_FEC_MXC
 101 #define IMX_FEC_BASE    FEC_BASE_ADDR
 102 #define CONFIG_FEC_MXC_PHYADDR  0x1F
 103
 104 #define CONFIG_MII
 105
 106 #define CONFIG_ARP_TIMEOUT      200UL
 107
 108 /*
 109  * Miscellaneous configurable options
 110  */
 111 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 112 #define CONFIG_CMDLINE_EDITING
 113
 114 #define CONFIG_AUTO_COMPLETE
 115 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 116 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 117 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 118
 119 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
 120 #define CONFIG_SYS_MEMTEST_END          0x10000
 121
 122 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 123
 124 /*
 125  * Physical Memory Map
 126  */
 127 #define CONFIG_NR_DRAM_BANKS    2
 128 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 129 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 130 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
 131 #define PHYS_SDRAM_2_SIZE       (128 * 1024 * 1024)
 132
 133 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
 134 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR + 0x10000)
 135 #define CONFIG_SYS_INIT_RAM_SIZE                (IRAM_SIZE / 2)
 136 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 137                                         GENERATED_GBL_DATA_SIZE)
 138 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 139                                         CONFIG_SYS_GBL_DATA_OFFSET)
 140
 141 /*
 142  * MTD Command for mtdparts
 143  */
 144 #define CONFIG_CMD_MTDPARTS
 145 #define CONFIG_MTD_DEVICE
 146 #define CONFIG_FLASH_CFI_MTD
 147 #define CONFIG_MTD_PARTITIONS
 148 #define MTDIDS_DEFAULT          "nand0=mxc_nand,nor0=physmap-flash.0"
 149 #define MTDPARTS_DEFAULT        "mtdparts=mxc_nand:1m(boot),5m(linux)," \
 150                                 "96m(root),8m(cfg),1938m(user);"        \
 151                                 "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"
 152
 153 /*
 154  * FLASH and environment organization
 155  */
 156 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 157 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 158 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 159 /* Monitor at beginning of flash */
 160 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 161 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 162
 163 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 164 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 165
 166 /* Address and size of Redundant Environment Sector     */
 167 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 168 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 169
 170 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 171                                 CONFIG_SYS_MONITOR_LEN)
 172
 173 #define CONFIG_ENV_IS_IN_FLASH
 174
 175 #if defined(CONFIG_FSL_ENV_IN_NAND)
 176         #define CONFIG_ENV_IS_IN_NAND
 177         #define CONFIG_ENV_OFFSET       (1024 * 1024)
 178 #endif
 179
 180 /*
 181  * CFI FLASH driver setup
 182  */
 183 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
 184 #define CONFIG_FLASH_CFI_DRIVER
 185
 186 /* A non-standard buffered write algorithm */
 187 #define CONFIG_FLASH_SPANSION_S29WS_N
 188 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* faster */
 189 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
 190
 191 /*
 192  * NAND FLASH driver setup
 193  */
 194 #define CONFIG_NAND_MXC
 195 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 196 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 197 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 198 #define CONFIG_MXC_NAND_HWECC
 199 #define CONFIG_SYS_NAND_LARGEPAGE
 200
 201 /* EHCI driver */
 202 #define CONFIG_USB_EHCI
 203 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      1
 204 #define CONFIG_EHCI_IS_TDI
 205 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 206 #define CONFIG_USB_EHCI_MXC
 207 #define CONFIG_MXC_USB_PORT     0
 208 #define CONFIG_MXC_USB_FLAGS    (MXC_EHCI_INTERFACE_DIFF_UNI | \
 209                                  MXC_EHCI_POWER_PINS_ENABLED | \
 210                                  MXC_EHCI_OC_PIN_ACTIVE_LOW)
 211 #define CONFIG_MXC_USB_PORTSC   (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
 212
 213 /* mmc driver */
 214 #define CONFIG_FSL_ESDHC
 215 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 216 #define CONFIG_SYS_FSL_ESDHC_NUM        1
 217
 218 /*
 219  * Default environment and default scripts
 220  * to update uboot and load kernel
 221  */
 222
 223 #define CONFIG_HOSTNAME "mx35pdk"
 224 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 225         "netdev=eth1\0"                                                 \
 226         "ethprime=smc911x\0"                                            \
 227         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 228                 "nfsroot=${serverip}:${rootpath}\0"                     \
 229         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 230         "addip_sta=setenv bootargs ${bootargs} "                        \
 231                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 232                 ":${hostname}:${netdev}:off panic=1\0"                  \
 233         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 234         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 235                 "else run addip_sta;fi\0"                               \
 236         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 237         "addtty=setenv bootargs ${bootargs}"                            \
 238                 " console=ttymxc0,${baudrate}\0"                        \
 239         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 240         "loadaddr=80800000\0"                                           \
 241         "kernel_addr_r=80800000\0"                                      \
 242         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 243         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 244         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
 245         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 246                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 247         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 248                 "bootm ${kernel_addr}\0"                                \
 249         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 250                 "run nfsargs addip addtty addmtd addmisc;"              \
 251                 "bootm ${kernel_addr_r}\0"                              \
 252         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 253                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 254         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 255         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 256         "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
 257         "update=protect off ${uboot_addr} +80000;"                      \
 258                 "erase ${uboot_addr} +80000;"                           \
 259                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 260         "upd=if run load;then echo Updating u-boot;if run update;"      \
 261                 "then echo U-Boot updated;"                             \
 262                         "else echo Error updating u-boot !;"            \
 263                         "echo Board without bootloader !!;"             \
 264                 "fi;"                                                   \
 265                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 266         "bootcmd=run net_nfs\0"
 267
 268 #endif                          /* __CONFIG_H */