include/configs/mx31pdk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
   4  *
   5  * (C) Copyright 2004
   6  * Texas Instruments.
   7  * Richard Woodruff <r-woodruff2@ti.com>
   8  * Kshitij Gupta <kshitij@ti.com>
   9  *
  10  * Configuration settings for the Freescale i.MX31 PDK board.
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18 /* High Level Configuration Options */
  19 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  20 #define CONFIG_SETUP_MEMORY_TAGS
  21 #define CONFIG_INITRD_TAG
  22
  23 #define CONFIG_MACH_TYPE        MACH_TYPE_MX31_3DS
  24
  25 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
  26 #define CONFIG_SPL_MAX_SIZE     2048
  27
  28 #define CONFIG_SPL_TEXT_BASE    0x87dc0000
  29
  30 #ifndef CONFIG_SPL_BUILD
  31 #define CONFIG_SKIP_LOWLEVEL_INIT
  32 #endif
  33
  34 /*
  35  * Size of malloc() pool
  36  */
  37 #define CONFIG_SYS_MALLOC_LEN           (2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
  38
  39 /*
  40  * Hardware drivers
  41  */
  42
  43 #define CONFIG_MXC_UART
  44 #define CONFIG_MXC_UART_BASE    UART1_BASE
  45
  46 #define CONFIG_HARD_SPI
  47 #define CONFIG_DEFAULT_SPI_BUS  1
  48 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
  49
  50 /* PMIC Controller */
  51 #define CONFIG_POWER
  52 #define CONFIG_POWER_SPI
  53 #define CONFIG_POWER_FSL
  54 #define CONFIG_FSL_PMIC_BUS     1
  55 #define CONFIG_FSL_PMIC_CS      2
  56 #define CONFIG_FSL_PMIC_CLK     1000000
  57 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  58 #define CONFIG_FSL_PMIC_BITLEN  32
  59 #define CONFIG_RTC_MC13XXX
  60
  61 /* allow to overwrite serial and ethaddr */
  62 #define CONFIG_ENV_OVERWRITE
  63
  64 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  65         "bootargs_base=setenv bootargs console=ttymxc0,115200\0"        \
  66         "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "       \
  67                 "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"     \
  68         "bootcmd=run bootcmd_net\0"                                     \
  69         "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "     \
  70                 "tftpboot 0x81000000 uImage-mx31; bootm\0"              \
  71         "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; "           \
  72                 "nand erase 0x0 0x40000; "                              \
  73                 "nand write 0x81000000 0x0 0x40000\0"
  74
  75 /*
  76  * Miscellaneous configurable options
  77  */
  78
  79 /* memtest works on */
  80 #define CONFIG_SYS_MEMTEST_START        0x80000000
  81 #define CONFIG_SYS_MEMTEST_END          0x80010000
  82
  83 /* default load address */
  84 #define CONFIG_SYS_LOAD_ADDR            0x81000000
  85
  86 /*-----------------------------------------------------------------------
  87  * Physical Memory Map
  88  */
  89 #define PHYS_SDRAM_1            CSD0_BASE
  90 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
  91
  92 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  93 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  94 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  95 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
  96                                                 GENERATED_GBL_DATA_SIZE)
  97 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
  98                                                 CONFIG_SYS_INIT_RAM_SIZE)
  99
 100 /*
 101  * environment organization
 102  */
 103 #define CONFIG_ENV_OFFSET               0x40000
 104 #define CONFIG_ENV_OFFSET_REDUND        0x60000
 105 #define CONFIG_ENV_SIZE                 (128 * 1024)
 106
 107 /*
 108  * NAND driver
 109  */
 110 #define CONFIG_MXC_NAND_REGS_BASE      NFC_BASE_ADDR
 111 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 112 #define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
 113 #define CONFIG_MXC_NAND_HWECC
 114 #define CONFIG_SYS_NAND_LARGEPAGE
 115
 116 /* NAND configuration for the NAND_SPL */
 117
 118 /* Start copying real U-Boot from the second page */
 119 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 120 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x3f800
 121 /* Load U-Boot to this address */
 122 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 123 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 124
 125 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
 126 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 127 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 128 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 129 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 130
 131 /* Configuration of lowlevel_init.S (clocks and SDRAM) */
 132 #define CCM_CCMR_SETUP          0x074B0BF5
 133 #define CCM_PDR0_SETUP_532MHZ   (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \
 134                                  PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) |    \
 135                                  PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) |    \
 136                                  PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0))
 137 #define CCM_MPCTL_SETUP_532MHZ  (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) |  \
 138                                  PLL_MFN(12))
 139
 140 #define ESDMISC_MDDR_SETUP      0x00000004
 141 #define ESDMISC_MDDR_RESET_DL   0x0000000c
 142 #define ESDCFG0_MDDR_SETUP      0x006ac73a
 143
 144 #define ESDCTL_ROW_COL          (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
 145 #define ESDCTL_SETTINGS         (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
 146                                  ESDCTL_DSIZ(2) | ESDCTL_BL(1))
 147 #define ESDCTL_PRECHARGE        (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
 148 #define ESDCTL_AUTOREFRESH      (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
 149 #define ESDCTL_LOADMODEREG      (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
 150 #define ESDCTL_RW               ESDCTL_SETTINGS
 151
 152 #endif /* __CONFIG_H */