include/configs/mx23evk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Freescale i.MX23 EVK board config
   4  *
   5  * Copyright (C) 2013 Otavio Salvador <otavio@ossystems.com.br>
   6  * on behalf of O.S. Systems Software LTDA.
   7  */
   8 #ifndef __CONFIGS_MX23EVK_H__
   9 #define __CONFIGS_MX23EVK_H__
  10
  11 /* System configurations */
  12 #define CONFIG_MACH_TYPE        MACH_TYPE_MX23EVK
  13
  14 /* U-Boot Commands */
  15
  16 /* Memory configuration */
  17 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  18 #define PHYS_SDRAM_1_SIZE               0x08000000      /* Max 128 MB RAM */
  19 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  20
  21 /* Environment */
  22
  23 /* Environment is in MMC */
  24
  25 /* USB */
  26 #ifdef  CONFIG_CMD_USB
  27 #define CONFIG_EHCI_MXS_PORT0
  28 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  29 #endif
  30
  31 /* Framebuffer support */
  32 #ifdef CONFIG_VIDEO
  33 #define CONFIG_VIDEO_LOGO
  34 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (512 << 10)
  35 #endif
  36
  37 /* Boot Linux */
  38 #define CONFIG_BOOTFILE         "uImage"
  39
  40 /* Extra Environments */
  41 #define CONFIG_EXTRA_ENV_SETTINGS \
  42         "update_sd_firmware_filename=u-boot.sd\0" \
  43         "update_sd_firmware="           /* Update the SD firmware partition */ \
  44                 "if mmc rescan ; then " \
  45                 "if tftp ${update_sd_firmware_filename} ; then " \
  46                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
  47                 "setexpr fw_sz ${fw_sz} + 1 ; " \
  48                 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
  49                 "fi ; " \
  50                 "fi\0" \
  51         "script=boot.scr\0"     \
  52         "image=zImage\0" \
  53         "console=ttyAMA0\0" \
  54         "fdt_file=imx23-evk.dtb\0" \
  55         "fdt_addr=0x41000000\0" \
  56         "boot_fdt=try\0" \
  57         "mmcdev=0\0" \
  58         "mmcpart=2\0" \
  59         "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
  60         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  61                 "root=${mmcroot}\0" \
  62         "loadbootscript="  \
  63                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  64         "bootscript=echo Running bootscript from mmc ...; "     \
  65                 "source\0" \
  66         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  67         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  68         "mmcboot=echo Booting from mmc ...; " \
  69                 "run mmcargs; " \
  70                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  71                         "if run loadfdt; then " \
  72                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  73                         "else " \
  74                                 "if test ${boot_fdt} = try; then " \
  75                                         "bootz; " \
  76                                 "else " \
  77                                         "echo WARN: Cannot load the DT; " \
  78                                 "fi; " \
  79                         "fi; " \
  80                 "else " \
  81                         "bootz; " \
  82                 "fi;\0"
  83
  84 #define CONFIG_BOOTCOMMAND \
  85         "mmc dev ${mmcdev}; if mmc rescan; then " \
  86                 "if run loadbootscript; then " \
  87                         "run bootscript; " \
  88                 "else " \
  89                         "if run loadimage; then " \
  90                                 "run mmcboot; " \
  91                         "else " \
  92                                 "echo ERR: Fail to boot from MMC; " \
  93                         "fi; " \
  94                 "fi; " \
  95         "else exit; fi"
  96
  97 /* The rest of the configuration is shared */
  98 #include <configs/mxs.h>
  99
 100 #endif /* __CONFIGS_MX23EVK_H__ */