595727aa30711ae89148ccce9ac81da967b3e267
[platform/kernel/u-boot.git] / include / configs / mx23evk.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Freescale i.MX23 EVK board config
4  *
5  * Copyright (C) 2013 Otavio Salvador <otavio@ossystems.com.br>
6  * on behalf of O.S. Systems Software LTDA.
7  */
8 #ifndef __CONFIGS_MX23EVK_H__
9 #define __CONFIGS_MX23EVK_H__
10
11 /* System configurations */
12 #define CONFIG_MACH_TYPE        MACH_TYPE_MX23EVK
13
14 /* U-Boot Commands */
15
16 /* Memory configuration */
17 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
18 #define PHYS_SDRAM_1_SIZE               0x08000000      /* Max 128 MB RAM */
19 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
20
21 /* Environment */
22 #define CONFIG_ENV_OVERWRITE
23
24 /* Environment is in MMC */
25 #if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
26 #define CONFIG_SYS_MMC_ENV_DEV  0
27 #endif
28
29 /* USB */
30 #ifdef  CONFIG_CMD_USB
31 #define CONFIG_EHCI_MXS_PORT0
32 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
33 #endif
34
35 /* Framebuffer support */
36 #ifdef CONFIG_VIDEO
37 #define CONFIG_VIDEO_LOGO
38 #define CONFIG_SPLASH_SCREEN
39 #define CONFIG_BMP_16BPP
40 #define CONFIG_VIDEO_BMP_RLE8
41 #define CONFIG_VIDEO_BMP_GZIP
42 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (512 << 10)
43 #endif
44
45 /* Boot Linux */
46 #define CONFIG_BOOTFILE         "uImage"
47 #define CONFIG_LOADADDR         0x42000000
48 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
49
50 /* Extra Environments */
51 #define CONFIG_EXTRA_ENV_SETTINGS \
52         "update_sd_firmware_filename=u-boot.sd\0" \
53         "update_sd_firmware="           /* Update the SD firmware partition */ \
54                 "if mmc rescan ; then " \
55                 "if tftp ${update_sd_firmware_filename} ; then " \
56                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
57                 "setexpr fw_sz ${fw_sz} + 1 ; " \
58                 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
59                 "fi ; " \
60                 "fi\0" \
61         "script=boot.scr\0"     \
62         "image=zImage\0" \
63         "console=ttyAMA0\0" \
64         "fdt_file=imx23-evk.dtb\0" \
65         "fdt_addr=0x41000000\0" \
66         "boot_fdt=try\0" \
67         "mmcdev=0\0" \
68         "mmcpart=2\0" \
69         "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
70         "mmcargs=setenv bootargs console=${console},${baudrate} " \
71                 "root=${mmcroot}\0" \
72         "loadbootscript="  \
73                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
74         "bootscript=echo Running bootscript from mmc ...; "     \
75                 "source\0" \
76         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
77         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
78         "mmcboot=echo Booting from mmc ...; " \
79                 "run mmcargs; " \
80                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
81                         "if run loadfdt; then " \
82                                 "bootz ${loadaddr} - ${fdt_addr}; " \
83                         "else " \
84                                 "if test ${boot_fdt} = try; then " \
85                                         "bootz; " \
86                                 "else " \
87                                         "echo WARN: Cannot load the DT; " \
88                                 "fi; " \
89                         "fi; " \
90                 "else " \
91                         "bootz; " \
92                 "fi;\0"
93
94 #define CONFIG_BOOTCOMMAND \
95         "mmc dev ${mmcdev}; if mmc rescan; then " \
96                 "if run loadbootscript; then " \
97                         "run bootscript; " \
98                 "else " \
99                         "if run loadimage; then " \
100                                 "run mmcboot; " \
101                         "else " \
102                                 "echo ERR: Fail to boot from MMC; " \
103                         "fi; " \
104                 "fi; " \
105         "else exit; fi"
106
107 /* The rest of the configuration is shared */
108 #include <configs/mxs.h>
109
110 #endif /* __CONFIGS_MX23EVK_H__ */