2 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_MVEBU_DB_88F3720_H
8 #define _CONFIG_MVEBU_DB_88F3720_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_DISPLAY_BOARDINFO_LATE
14 #define CONFIG_ARCH_EARLY_INIT_R
16 #define CONFIG_SYS_TEXT_BASE 0x00000000
18 /* additions for new ARM relocation support */
19 #define CONFIG_SYS_SDRAM_BASE 0x00000000
21 #define CONFIG_NR_DRAM_BANKS 1
24 #define CONFIG_PREBOOT
26 #define CONFIG_BAUDRATE 115200
27 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
28 115200, 230400, 460800, 921600 }
31 * For booting Linux, the board info and command line data
32 * have to be in the first 8 MB of memory, since this is
33 * the maximum mapped by the Linux kernel during initialization.
35 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
36 #define CONFIG_INITRD_TAG /* enable INITRD tag */
37 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
39 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
40 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
41 +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
44 * Size of malloc() pool
46 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
49 * Other required minimal configurations
51 #define CONFIG_SYS_LONGHELP
52 #define CONFIG_AUTO_COMPLETE
53 #define CONFIG_CMDLINE_EDITING
54 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
55 #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
56 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
57 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
58 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
59 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
60 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
62 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
63 #define CONFIG_SYS_ALT_MEMTEST
65 /* End of 16M scrubbed by training in bootrom */
66 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
72 #define CONFIG_SYS_I2C_SLAVE 0x0
75 * SPI Flash configuration
77 #define CONFIG_ENV_SPI_BUS 0
78 #define CONFIG_ENV_SPI_CS 0
80 /* SPI NOR flash default params, used by sf commands */
81 #define CONFIG_SF_DEFAULT_SPEED 1000000
82 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
83 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
85 /* Environment in SPI NOR flash */
86 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
87 #define CONFIG_ENV_IS_IN_SPI_FLASH
88 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
89 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
90 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
93 * Ethernet Driver configuration
95 #define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */
96 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
97 #define CONFIG_PHY_GIGE /* GbE speed/duplex detect */
98 #define CONFIG_ARP_TIMEOUT 200
99 #define CONFIG_NET_RETRY_COUNT 50
102 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
105 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
107 #define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
108 CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
111 #define CONFIG_USB_HOST_ETHER
112 #define CONFIG_USB_ETHER_ASIX
113 #define CONFIG_USB_ETHER_MCS7830
114 #define CONFIG_USB_ETHER_RTL8152
115 #define CONFIG_USB_ETHER_SMSC95XX
118 * SATA/SCSI/AHCI configuration
121 #define CONFIG_SCSI_AHCI
122 #define CONFIG_SCSI_AHCI_PLAT
123 #define CONFIG_LIBATA
125 #define CONFIG_SYS_64BIT_LBA
127 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
128 #define CONFIG_SYS_SCSI_MAX_LUN 1
129 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
130 CONFIG_SYS_SCSI_MAX_LUN)
132 #define CONFIG_SUPPORT_VFAT
134 /* DISK Partition support */
135 #define CONFIG_EFI_PARTITION
136 #define CONFIG_DOS_PARTITION
137 #define CONFIG_MAC_PARTITION
138 #define CONFIG_ISO_PARTITION /* Experimental */
140 #define CONFIG_CMD_PART
141 #define CONFIG_PARTITION_UUIDS
143 #endif /* _CONFIG_MVEBU_DB_88F3720_H */