2 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
8 #define _CONFIG_MVEBU_ARMADA_8K_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
15 #define CONFIG_DISPLAY_BOARDINFO_LATE
17 /* additions for new ARM relocation support */
18 #define CONFIG_SYS_SDRAM_BASE 0x00000000
20 #define CONFIG_NR_DRAM_BANKS 1
23 #define CONFIG_PREBOOT
25 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
26 115200, 230400, 460800, 921600 }
29 * For booting Linux, the board info and command line data
30 * have to be in the first 8 MB of memory, since this is
31 * the maximum mapped by the Linux kernel during initialization.
33 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
34 #define CONFIG_INITRD_TAG /* enable INITRD tag */
35 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
37 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
40 * Size of malloc() pool
42 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
45 * Other required minimal configurations
47 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
48 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
49 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
50 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
51 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
52 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
54 /* End of 16M scrubbed by training in bootrom */
55 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
58 * SPI Flash configuration
60 #define CONFIG_ENV_SPI_BUS 0
61 #define CONFIG_ENV_SPI_CS 0
63 /* SPI NOR flash default params, used by sf commands */
64 #define CONFIG_SF_DEFAULT_SPEED 1000000
65 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
66 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
68 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
69 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
70 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
72 #define CONFIG_SYS_MAX_NAND_DEVICE 1
73 #define CONFIG_SYS_NAND_MAX_CHIPS 1
74 #define CONFIG_SYS_NAND_ONFI_DETECTION
75 #define CONFIG_SYS_NAND_USE_FLASH_BBT
78 * Ethernet Driver configuration
80 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
81 #define CONFIG_ARP_TIMEOUT 200
82 #define CONFIG_NET_RETRY_COUNT 50
84 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
89 * SATA/SCSI/AHCI configuration
91 #define CONFIG_SCSI_AHCI_PLAT
93 #define CONFIG_SYS_64BIT_LBA
95 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
96 #define CONFIG_SYS_SCSI_MAX_LUN 1
97 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
98 CONFIG_SYS_SCSI_MAX_LUN)
103 #ifdef CONFIG_PCIE_DW_MVEBU
107 #define BOOT_TARGET_DEVICES(func) \
111 func(SCSI, scsi, 0) \
115 #include <config_distro_bootcmd.h>
117 #define CONFIG_EXTRA_ENV_SETTINGS \
118 "scriptaddr=0x4d00000\0" \
119 "pxefile_addr_r=0x4e00000\0" \
120 "fdt_addr_r=0x4f00000\0" \
121 "kernel_addr_r=0x5000000\0" \
122 "ramdisk_addr_r=0x8000000\0" \
123 "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
126 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */