2 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
8 #define _CONFIG_MVEBU_ARMADA_8K_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
15 #define CONFIG_DISPLAY_BOARDINFO_LATE
17 #define CONFIG_SYS_TEXT_BASE 0x00000000
19 /* additions for new ARM relocation support */
20 #define CONFIG_SYS_SDRAM_BASE 0x00000000
22 #define CONFIG_NR_DRAM_BANKS 1
25 #define CONFIG_PREBOOT
27 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
28 115200, 230400, 460800, 921600 }
31 * For booting Linux, the board info and command line data
32 * have to be in the first 8 MB of memory, since this is
33 * the maximum mapped by the Linux kernel during initialization.
35 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
36 #define CONFIG_INITRD_TAG /* enable INITRD tag */
37 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
39 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
42 * Size of malloc() pool
44 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
47 * Other required minimal configurations
49 #define CONFIG_SYS_LONGHELP
50 #define CONFIG_AUTO_COMPLETE
51 #define CONFIG_CMDLINE_EDITING
52 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
53 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
54 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
55 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
56 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
57 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
59 #define CONFIG_SYS_ALT_MEMTEST
61 /* End of 16M scrubbed by training in bootrom */
62 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
65 * SPI Flash configuration
67 #define CONFIG_KIRKWOOD_SPI
68 #define CONFIG_ENV_SPI_BUS 0
69 #define CONFIG_ENV_SPI_CS 0
71 /* SPI NOR flash default params, used by sf commands */
72 #define CONFIG_SF_DEFAULT_SPEED 1000000
73 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
74 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
76 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
77 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
78 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
80 #define CONFIG_SYS_MAX_NAND_DEVICE 1
81 #define CONFIG_SYS_NAND_MAX_CHIPS 1
82 #define CONFIG_SYS_NAND_ONFI_DETECTION
83 #define CONFIG_SYS_NAND_USE_FLASH_BBT
86 * Ethernet Driver configuration
88 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
89 #define CONFIG_ARP_TIMEOUT 200
90 #define CONFIG_NET_RETRY_COUNT 50
92 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
97 * SATA/SCSI/AHCI configuration
99 #define CONFIG_SCSI_AHCI
100 #define CONFIG_SCSI_AHCI_PLAT
101 #define CONFIG_LIBATA
103 #define CONFIG_SYS_64BIT_LBA
105 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
106 #define CONFIG_SYS_SCSI_MAX_LUN 1
107 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
108 CONFIG_SYS_SCSI_MAX_LUN)
110 #define CONFIG_SUPPORT_VFAT
115 #ifdef CONFIG_PCIE_DW_MVEBU
119 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */