1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
6 #ifndef _CONFIG_MVEBU_ARMADA_37XX_H
7 #define _CONFIG_MVEBU_ARMADA_37XX_H
9 #include <linux/sizes.h>
12 * High Level Configuration Options (easy to change)
15 /* additions for new ARM relocation support */
16 #define CONFIG_SYS_SDRAM_BASE 0x00000000
18 #define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
20 #define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \
21 9600, 19200, 38400, 57600, 115200, \
22 230400, 460800, 500000, 576000, \
23 921600, 1000000, 1152000, 1500000, \
24 2000000, 2500000, 3000000, 3500000, \
25 4000000, 4500000, 5000000, 5500000, \
29 * Other required minimal configurations
35 #define DEFAULT_ENV_IS_RW /* required for configuring default fdtfile= */
37 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
40 * SATA/SCSI/AHCI configuration
43 #define CONFIG_SYS_64BIT_LBA
45 #define BOOT_TARGET_DEVICES(func) \
53 #include <config_distro_bootcmd.h>
55 /* filler for default values filled by board_early_init_f() */
56 #define ENV_RW_FILLER \
57 "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for ethaddr= */ \
58 "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth1addr= */ \
59 "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth2addr= */ \
60 "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth3addr= */ \
61 "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for fdtfile= */ \
64 /* fdt_addr and kernel_addr are needed for existing distribution boot scripts */
65 #define CONFIG_EXTRA_ENV_SETTINGS \
66 "scriptaddr=0x6d00000\0" \
67 "pxefile_addr_r=0x6e00000\0" \
68 "fdt_addr=0x6f00000\0" \
69 "fdt_addr_r=0x6f00000\0" \
70 "kernel_addr=0x7000000\0" \
71 "kernel_addr_r=0x7000000\0" \
72 "ramdisk_addr_r=0xa000000\0" \
76 #endif /* _CONFIG_MVEBU_ARMADA_37XX_H */