Merge branch 'master' of git://git.denx.de/u-boot-samsung
[platform/kernel/u-boot.git] / include / configs / mpc8308_p1m.h
1 /*
2  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
3  * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
4  *
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #define CONFIG_DISPLAY_BOARDINFO
13
14 /*
15  * High Level Configuration Options
16  */
17 #define CONFIG_E300             1 /* E300 family */
18 #define CONFIG_MPC830x          1 /* MPC830x family */
19 #define CONFIG_MPC8308          1 /* MPC8308 CPU specific */
20 #define CONFIG_MPC8308_P1M      1 /* mpc8308_p1m board specific */
21
22 #ifndef CONFIG_SYS_TEXT_BASE
23 #define CONFIG_SYS_TEXT_BASE    0xFC000000
24 #endif
25
26 /*
27  * On-board devices
28  *
29  * TSECs
30  */
31 #define CONFIG_TSEC1
32 #define CONFIG_TSEC2
33
34 /*
35  * System Clock Setup
36  */
37 #define CONFIG_83XX_CLKIN       33333333 /* in Hz */
38 #define CONFIG_SYS_CLK_FREQ     CONFIG_83XX_CLKIN
39
40 /*
41  * Hardware Reset Configuration Word
42  * if CLKIN is 66.66MHz, then
43  * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz
44  * We choose the A type silicon as default, so the core is 400Mhz.
45  */
46 #define CONFIG_SYS_HRCW_LOW (\
47         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
48         HRCWL_DDR_TO_SCB_CLK_2X1 |\
49         HRCWL_SVCOD_DIV_2 |\
50         HRCWL_CSB_TO_CLKIN_4X1 |\
51         HRCWL_CORE_TO_CSB_3X1)
52 /*
53  * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits
54  * in 8308's HRCWH according to the manual, but original Freescale's
55  * code has them and I've expirienced some problems using the board
56  * with BDI3000 attached when I've tried to set these bits to zero
57  * (UART doesn't work after the 'reset run' command).
58  */
59 #define CONFIG_SYS_HRCW_HIGH (\
60         HRCWH_PCI_HOST |\
61         HRCWH_PCI1_ARBITER_ENABLE |\
62         HRCWH_CORE_ENABLE |\
63         HRCWH_FROM_0X00000100 |\
64         HRCWH_BOOTSEQ_DISABLE |\
65         HRCWH_SW_WATCHDOG_DISABLE |\
66         HRCWH_ROM_LOC_LOCAL_16BIT |\
67         HRCWH_RL_EXT_LEGACY |\
68         HRCWH_TSEC1M_IN_MII |\
69         HRCWH_TSEC2M_IN_MII |\
70         HRCWH_BIG_ENDIAN)
71
72 /*
73  * System IO Config
74  */
75 #define CONFIG_SYS_SICRH (\
76         SICRH_ESDHC_A_GPIO |\
77         SICRH_ESDHC_B_GPIO |\
78         SICRH_ESDHC_C_GTM |\
79         SICRH_GPIO_A_TSEC2 |\
80         SICRH_GPIO_B_TSEC2_TX_CLK |\
81         SICRH_IEEE1588_A_GPIO |\
82         SICRH_USB |\
83         SICRH_GTM_GPIO |\
84         SICRH_IEEE1588_B_GPIO |\
85         SICRH_ETSEC2_CRS |\
86         SICRH_GPIOSEL_1 |\
87         SICRH_TMROBI_V3P3 |\
88         SICRH_TSOBI1_V3P3 |\
89         SICRH_TSOBI2_V3P3)      /* 0xf577d100 */
90 #define CONFIG_SYS_SICRL (\
91         SICRL_SPI_PF0 |\
92         SICRL_UART_PF0 |\
93         SICRL_IRQ_PF0 |\
94         SICRL_I2C2_PF0 |\
95         SICRL_ETSEC1_TX_CLK)    /* 0x00000000 */
96
97 #define CONFIG_SYS_GPIO1_PRELIM
98 /* GPIO Default input/output settings */
99 #define CONFIG_SYS_GPIO1_DIR        0x7AAF8C00
100 /*
101  * Default GPIO values:
102  * LED#1 enabled; WLAN enabled; Both COM LED on (orange)
103  */
104 #define CONFIG_SYS_GPIO1_DAT        0x08008C00
105
106 /*
107  * IMMR new address
108  */
109 #define CONFIG_SYS_IMMR         0xE0000000
110
111 /*
112  * SERDES
113  */
114 #define CONFIG_FSL_SERDES
115 #define CONFIG_FSL_SERDES1      0xe3000
116
117 /*
118  * Arbiter Setup
119  */
120 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */
121 #define CONFIG_SYS_ACR_RPTCNT   3 /* Arbiter repeat count is 4 */
122 #define CONFIG_SYS_SPCR_TSECEP  3 /* eTSEC emergency priority is highest */
123
124 /*
125  * DDR Setup
126  */
127 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
128 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
129 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
130 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
131 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
132                                 | DDRCDR_PZ_LOZ \
133                                 | DDRCDR_NZ_LOZ \
134                                 | DDRCDR_ODT \
135                                 | DDRCDR_Q_DRN)
136                                 /* 0x7b880001 */
137 /*
138  * Manually set up DDR parameters
139  * consist of two chips HY5PS12621BFP-C4 from HYNIX
140  */
141
142 #define CONFIG_SYS_DDR_SIZE             128 /* MB */
143
144 #define CONFIG_SYS_DDR_CS0_BNDS 0x00000007
145 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
146                                         | CSCONFIG_ODT_RD_NEVER \
147                                         | CSCONFIG_ODT_WR_ONLY_CURRENT \
148                                         | CSCONFIG_ROW_BIT_13 \
149                                         | CSCONFIG_COL_BIT_10)
150                                         /* 0x80010102 */
151 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
152 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
153                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
154                                 | (0 << TIMING_CFG0_RRT_SHIFT) \
155                                 | (0 << TIMING_CFG0_WWT_SHIFT) \
156                                 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
157                                 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
158                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
159                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
160                                 /* 0x00220802 */
161 #define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
162                                 | (7 << TIMING_CFG1_ACTTOPRE_SHIFT) \
163                                 | (2 << TIMING_CFG1_ACTTORW_SHIFT) \
164                                 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
165                                 | (6 << TIMING_CFG1_REFREC_SHIFT) \
166                                 | (2 << TIMING_CFG1_WRREC_SHIFT) \
167                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
168                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
169                                 /* 0x27256222 */
170 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
171                                 | (4 << TIMING_CFG2_CPO_SHIFT) \
172                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
173                                 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
174                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
175                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
176                                 | (5 << TIMING_CFG2_FOUR_ACT_SHIFT))
177                                 /* 0x121048c5 */
178 #define CONFIG_SYS_DDR_INTERVAL ((0x0360 << SDRAM_INTERVAL_REFINT_SHIFT) \
179                                 | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
180                                 /* 0x03600100 */
181 #define CONFIG_SYS_DDR_SDRAM_CFG        (SDRAM_CFG_SREN \
182                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
183                                 | SDRAM_CFG_DBW_32)
184                                 /* 0x43080000 */
185
186 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000 /* 1 posted refresh */
187 #define CONFIG_SYS_DDR_MODE             ((0x0448 << SDRAM_MODE_ESD_SHIFT) \
188                                 | (0x0232 << SDRAM_MODE_SD_SHIFT))
189                                 /* ODT 150ohm CL=3, AL=1 on SDRAM */
190 #define CONFIG_SYS_DDR_MODE2            0x00000000
191
192 /*
193  * Memory test
194  */
195 #define CONFIG_SYS_MEMTEST_START        0x00001000 /* memtest region */
196 #define CONFIG_SYS_MEMTEST_END          0x07f00000
197
198 /*
199  * The reserved memory
200  */
201 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
202
203 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024) /* Reserve 384 kB for Mon */
204 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024) /* Reserved for malloc */
205
206 /*
207  * Initial RAM Base Address Setup
208  */
209 #define CONFIG_SYS_INIT_RAM_LOCK        1
210 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
211 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* Size of used area in RAM */
212 #define CONFIG_SYS_GBL_DATA_OFFSET      \
213         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
214
215 /*
216  * Local Bus Configuration & Clock Setup
217  */
218 #define CONFIG_SYS_LCRR_DBYP            LCRR_DBYP
219 #define CONFIG_SYS_LCRR_CLKDIV          LCRR_CLKDIV_2
220 #define CONFIG_SYS_LBC_LBCR             0x00040000
221
222 /*
223  * FLASH on the Local Bus
224  */
225 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
226 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
227 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
228
229 #define CONFIG_SYS_FLASH_BASE           0xFC000000 /* FLASH base address */
230 #define CONFIG_SYS_FLASH_SIZE           64 /* FLASH size is 64M */
231 #define CONFIG_SYS_FLASH_PROTECTION     1 /* Use h/w Flash protection. */
232
233 /* Window base at flash base */
234 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
235 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_64MB)
236
237 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
238                                 | BR_PS_16      /* 16 bit port */ \
239                                 | BR_MS_GPCM    /* MSEL = GPCM */ \
240                                 | BR_V)         /* valid */
241 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
242                                 | OR_UPM_XAM \
243                                 | OR_GPCM_CSNT \
244                                 | OR_GPCM_ACS_DIV2 \
245                                 | OR_GPCM_XACS \
246                                 | OR_GPCM_SCY_4 \
247                                 | OR_GPCM_TRLX_SET \
248                                 | OR_GPCM_EHTR_SET)
249
250 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* number of banks */
251 #define CONFIG_SYS_MAX_FLASH_SECT       512
252
253 /* Flash Erase Timeout (ms) */
254 #define CONFIG_SYS_FLASH_ERASE_TOUT     (1000 * 1024)
255 /* Flash Write Timeout (ms) */
256 #define CONFIG_SYS_FLASH_WRITE_TOUT     (500 * 1024)
257
258 /*
259  * SJA1000 CAN controller on Local Bus
260  */
261 #define CONFIG_SYS_SJA1000_BASE 0xFBFF0000
262 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_SJA1000_BASE \
263                                 | BR_PS_8       /* 8 bit port size */ \
264                                 | BR_MS_GPCM    /* MSEL = GPCM */ \
265                                 | BR_V)         /* valid */
266 #define CONFIG_SYS_OR1_PRELIM   (OR_AM_32KB \
267                                 | OR_GPCM_SCY_5 \
268                                 | OR_GPCM_EHTR_SET)
269                                 /* 0xFFFF8052 */
270
271 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_SJA1000_BASE
272 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
273
274 /*
275  * CPLD on Local Bus
276  */
277 #define CONFIG_SYS_CPLD_BASE    0xFBFF8000
278 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_CPLD_BASE \
279                                 | BR_PS_8       /* 8 bit port */ \
280                                 | BR_MS_GPCM    /* MSEL = GPCM */ \
281                                 | BR_V)         /* valid */
282 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_32KB \
283                                 | OR_GPCM_SCY_4 \
284                                 | OR_GPCM_EHTR_SET)
285                                 /* 0xFFFF8042 */
286
287 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_CPLD_BASE
288 #define CONFIG_SYS_LBLAWAR2_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
289
290 /*
291  * Serial Port
292  */
293 #define CONFIG_CONS_INDEX       1
294 #undef CONFIG_SERIAL_SOFTWARE_FIFO
295 #define CONFIG_SYS_NS16550_SERIAL
296 #define CONFIG_SYS_NS16550_REG_SIZE     1
297 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
298
299 #define CONFIG_SYS_BAUDRATE_TABLE  \
300         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
301
302 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
303 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
304
305 /* I2C */
306 #define CONFIG_SYS_I2C
307 #define CONFIG_SYS_I2C_FSL
308 #define CONFIG_SYS_FSL_I2C_SPEED        400000
309 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
310 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
311 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
312 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
313 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
314
315 /*
316  * General PCI
317  * Addresses are mapped 1-1.
318  */
319 #define CONFIG_SYS_PCIE1_BASE           0xA0000000
320 #define CONFIG_SYS_PCIE1_MEM_BASE       0xA0000000
321 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xA0000000
322 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000
323 #define CONFIG_SYS_PCIE1_CFG_BASE       0xB0000000
324 #define CONFIG_SYS_PCIE1_CFG_SIZE       0x01000000
325 #define CONFIG_SYS_PCIE1_IO_BASE        0x00000000
326 #define CONFIG_SYS_PCIE1_IO_PHYS        0xB1000000
327 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000
328
329 /* enable PCIE clock */
330 #define CONFIG_SYS_SCCR_PCIEXP1CM       1
331
332 #define CONFIG_PCI
333 #define CONFIG_PCI_INDIRECT_BRIDGE
334 #define CONFIG_PCIE
335
336 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
337
338 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957   /* Freescale */
339 #define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
340
341 /*
342  * TSEC
343  */
344 #define CONFIG_TSEC_ENET        /* TSEC ethernet support */
345 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
346 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
347 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
348 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
349
350 /*
351  * TSEC ethernet configuration
352  */
353 #define CONFIG_MII              1 /* MII PHY management */
354 #define CONFIG_TSEC1_NAME       "eTSEC0"
355 #define CONFIG_TSEC2_NAME       "eTSEC1"
356 #define TSEC1_PHY_ADDR          1
357 #define TSEC2_PHY_ADDR          2
358 #define TSEC1_PHYIDX            0
359 #define TSEC2_PHYIDX            0
360 #define TSEC1_FLAGS             0
361 #define TSEC2_FLAGS             0
362
363 /* Options are: eTSEC[0-1] */
364 #define CONFIG_ETHPRIME         "eTSEC0"
365
366 /*
367  * Environment
368  */
369 #define CONFIG_ENV_IS_IN_FLASH  1
370 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
371                                  CONFIG_SYS_MONITOR_LEN)
372 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
373 #define CONFIG_ENV_SIZE         0x2000
374 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
375 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
376
377 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
378 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
379
380 /*
381  * BOOTP options
382  */
383 #define CONFIG_BOOTP_BOOTFILESIZE
384 #define CONFIG_BOOTP_BOOTPATH
385 #define CONFIG_BOOTP_GATEWAY
386 #define CONFIG_BOOTP_HOSTNAME
387
388 /*
389  * Command line configuration.
390  */
391 #define CONFIG_CMD_PCI
392
393 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
394
395 /*
396  * Miscellaneous configurable options
397  */
398 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
399 #define CONFIG_SYS_LOAD_ADDR            0x2000000 /* default load address */
400
401 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
402
403 /* Print Buffer Size */
404 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
405 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
406 /* Boot Argument Buffer Size */
407 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
408
409 /*
410  * For booting Linux, the board info and command line data
411  * have to be in the first 8 MB of memory, since this is
412  * the maximum mapped by the Linux kernel during initialization.
413  */
414 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20) /* Initial Memory map for Linux */
415
416 /*
417  * Core HID Setup
418  */
419 #define CONFIG_SYS_HID0_INIT    0x000000000
420 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
421                                  HID0_ENABLE_INSTRUCTION_CACHE | \
422                                  HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
423 #define CONFIG_SYS_HID2         HID2_HBE
424
425 /*
426  * MMU Setup
427  */
428
429 /* DDR: cache cacheable */
430 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \
431                                         BATL_MEMCOHERENCE)
432 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \
433                                         BATU_VS | BATU_VP)
434 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
435 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
436
437 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
438 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_IMMR | BATL_PP_RW | \
439                         BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
440 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \
441                                         BATU_VP)
442 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
443 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
444
445 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
446 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
447                                         BATL_MEMCOHERENCE)
448 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \
449                                         BATU_VS | BATU_VP)
450 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
451                                         BATL_CACHEINHIBIT | \
452                                         BATL_GUARDEDSTORAGE)
453 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
454
455 /* Stack in dcache: cacheable, no memory coherence */
456 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
457 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
458                                         BATU_VS | BATU_VP)
459 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
460 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
461
462 /*
463  * Environment Configuration
464  */
465
466 #define CONFIG_ENV_OVERWRITE
467
468 #if defined(CONFIG_TSEC_ENET)
469 #define CONFIG_HAS_ETH0
470 #define CONFIG_HAS_ETH1
471 #endif
472
473 #define CONFIG_BAUDRATE 115200
474
475 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
476
477 #define CONFIG_BOOTDELAY        5       /* -1 disables auto-boot */
478
479 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
480         "netdev=eth0\0"                                                 \
481         "consoledev=ttyS0\0"                                            \
482         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
483                 "nfsroot=${serverip}:${rootpath}\0"                     \
484         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
485         "addip=setenv bootargs ${bootargs} "                            \
486                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
487                 ":${hostname}:${netdev}:off panic=1\0"                  \
488         "addtty=setenv bootargs ${bootargs}"                            \
489                 " console=${consoledev},${baudrate}\0"                  \
490         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
491         "addmisc=setenv bootargs ${bootargs}\0"                         \
492         "kernel_addr=FC0A0000\0"                                        \
493         "fdt_addr=FC2A0000\0"                                           \
494         "ramdisk_addr=FC2C0000\0"                                       \
495         "u-boot=mpc8308_p1m/u-boot.bin\0"                               \
496         "kernel_addr_r=1000000\0"                                       \
497         "fdt_addr_r=C00000\0"                                           \
498         "hostname=mpc8308_p1m\0"                                        \
499         "bootfile=mpc8308_p1m/uImage\0"                                 \
500         "fdtfile=mpc8308_p1m/mpc8308_p1m.dtb\0"                         \
501         "rootpath=/opt/eldk-4.2/ppc_6xx\0"                              \
502         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
503                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
504         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
505                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
506         "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
507                 "tftp ${fdt_addr_r} ${fdtfile};"                        \
508                 "run nfsargs addip addtty addmtd addmisc;"              \
509                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
510         "bootcmd=run flash_self\0"                                      \
511         "load=tftp ${loadaddr} ${u-boot}\0"                             \
512         "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
513                 " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
514                 " +${filesize};cp.b ${fileaddr} "                       \
515                 __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"   \
516         "upd=run load update\0"                                         \
517
518 #endif  /* __CONFIG_H */