Merge tag 'u-boot-imx-20191104' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
[platform/kernel/u-boot.git] / include / configs / mccmon6.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2016-2017
4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
5  */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 #include "mx6_common.h"
11
12 #define CONFIG_SPL_LIBCOMMON_SUPPORT
13 #include "imx6_spl.h"
14
15 #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
16 #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
17 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
18
19 /*
20  * Below defines are set but NOT really used since we by
21  * design force U-Boot run when we boot in development
22  * mode from SD card (SD2)
23  */
24 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
25 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
26 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000)
27 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"
28
29 /* Size of malloc() pool */
30 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
31
32 #define CONFIG_BOARD_LATE_INIT
33 #define CONFIG_MXC_UART_BASE            UART1_BASE
34
35 #define CONFIG_SYS_MEMTEST_START        0x10000000
36 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
37
38 /* MMC Configuration */
39 #define CONFIG_SYS_FSL_USDHC_NUM        2
40 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
41
42 /* NOR 16-bit mode */
43 #define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
44 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
45 #define CONFIG_SYS_FLASH_EMPTY_INFO
46 #define CONFIG_FLASH_VERIFY
47
48 /* NOR Flash MTD */
49 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
50 #define CONFIG_SYS_FLASH_BANKS_LIST     { (CONFIG_SYS_FLASH_BASE) }
51 #define CONFIG_SYS_FLASH_BANKS_SIZES    { (32 * SZ_1M) }
52
53 /* Ethernet Configuration */
54 #define IMX_FEC_BASE                    ENET_BASE_ADDR
55 #define CONFIG_FEC_MXC_PHYADDR          1
56
57 #define CONFIG_EXTRA_ENV_SETTINGS \
58         "console=ttymxc0,115200 quiet\0" \
59         "fdt_high=0xffffffff\0" \
60         "initrd_high=0xffffffff\0" \
61         "boot_os=yes\0" \
62         "kernelsize=0x300000\0" \
63         "disable_giga=yes\0" \
64         "download_kernel=" \
65                 "tftpboot ${loadaddr} ${kernel_file};\0" \
66         "get_boot_medium=" \
67                 "setenv boot_medium nor;" \
68                 "setexpr.l _src_sbmr1 *0x020d8004;" \
69                 "setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
70                 "if test ${_b_medium} = 40; then " \
71                         "setenv boot_medium sdcard;" \
72                 "fi\0" \
73         "kernel_file=fitImage\0" \
74         "boot_sd=" \
75                 "echo '#######################';" \
76                 "echo '# Factory SDcard Boot #';" \
77                 "echo '#######################';" \
78                 "setenv mmcdev 1;" \
79                 "setenv mmcfactorydev 0;" \
80                 "setenv mmcfactorypart 1;" \
81                 "run factory_flash_img;\0" \
82         "boot_nor=" \
83                 "setenv kernelnor 0x08180000;" \
84                 "setenv bootargs console=${console} " \
85                 CONFIG_MTDPARTS_DEFAULT " " \
86                 "root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
87                 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
88                 "bootm ${loadaddr};reset;\0" \
89         "boot_recovery=" \
90                 "echo '#######################';" \
91                 "echo '# RECOVERY SWU Boot   #';" \
92                 "echo '#######################';" \
93                 "setenv rootfsloadaddr 0x13000000;" \
94                 "setenv swukernelnor 0x08980000;" \
95                 "setenv swurootfsnor 0x09180000;" \
96                 "setenv bootargs console=${console} " \
97                 CONFIG_MTDPARTS_DEFAULT " " \
98                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
99                     ":${hostname}::off root=/dev/ram rw;" \
100                 "cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
101                 "cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
102                 "bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
103         "boot_tftp=" \
104                 "echo '#######################';" \
105                 "echo '# TFTP Boot           #';" \
106                 "echo '#######################';" \
107                 "if run download_kernel; then " \
108                      "setenv bootargs console=${console} " \
109                      "root=/dev/mmcblk0p2 rootwait;" \
110                      "bootm $loadaddr};reset;" \
111                 "fi\0" \
112         "bootcmd=" \
113                 "if test -n ${recovery_status}; then " \
114                      "run boot_recovery;" \
115                 "else " \
116                      "if test ! -n ${boot_medium}; then " \
117                           "run get_boot_medium;" \
118                           "if test ${boot_medium} = sdcard; then " \
119                               "run boot_sd;" \
120                           "else " \
121                               "run boot_nor;" \
122                           "fi;" \
123                      "else " \
124                           "if test ${boot_medium} = tftp; then " \
125                               "run boot_tftp;" \
126                           "fi;" \
127                      "fi;" \
128                 "fi\0" \
129         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
130         "bootdev=1\0" \
131         "bootpart=1\0" \
132         "netdev=eth0\0" \
133         "load_addr=0x11000000\0" \
134         "uboot_file=u-boot.img\0" \
135         "SPL_file=SPL\0" \
136         "load_uboot=tftp ${load_addr} ${uboot_file}\0" \
137         "nor_img_addr=0x11000000\0" \
138         "nor_img_file=core-image-lwn-mccmon6.nor\0" \
139         "emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
140         "nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
141         "nor_img_size=0x02000000\0" \
142         "factory_script_file=factory.scr\0" \
143         "factory_load_script=" \
144                 "if test -e mmc ${mmcdev}:${mmcfactorypart} " \
145                     "${factory_script_file}; then " \
146                     "load mmc ${mmcdev}:${mmcfactorypart} " \
147                      "${loadaddr} ${factory_script_file};" \
148                 "fi\0" \
149         "factory_script=echo Running factory script from mmc${mmcdev} ...; " \
150                 "source ${loadaddr}\0" \
151         "factory_flash_img="\
152                 "echo 'Flash mccmon6 with factory images'; " \
153                 "if run factory_load_script; then " \
154                         "run factory_script;" \
155                 "else " \
156                     "echo No factory script: ${factory_script_file} found on " \
157                     "device ${mmcdev};" \
158                     "run factory_nor_img;" \
159                     "run factory_eMMC_img;" \
160                     "run factory_SPL_falcon_setup;" \
161                 "fi\0" \
162         "factory_eMMC_img="\
163                 "echo 'Update mccmon6 eMMC image'; " \
164                 "if load mmc ${mmcdev}:${mmcfactorypart} " \
165                     "${loadaddr} ${emmc_img_file}; then " \
166                     "setexpr fw_sz ${filesize} / 0x200;" \
167                     "setexpr fw_sz ${fw_sz} + 1;" \
168                     "mmc dev ${mmcfactorydev};" \
169                     "mmc write ${loadaddr} 0x0 ${fw_sz};" \
170                 "fi\0" \
171         "factory_nor_img="\
172                 "echo 'Update mccmon6 NOR image'; " \
173                 "if load mmc ${mmcdev}:${mmcfactorypart} " \
174                     "${nor_img_addr} ${nor_img_file}; then " \
175                         "run nor_update;" \
176                 "fi\0" \
177         "nor_update=" \
178                     "protect off ${nor_bank_start} +${nor_img_size};" \
179                     "erase ${nor_bank_start} +${nor_img_size};" \
180                     "setexpr nor_img_size ${nor_img_size} / 4; " \
181                     "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
182         "factory_SPL_falcon_setup="\
183                 "echo 'Write Falcon boot data'; " \
184                 "setenv kernelnor 0x08180000;" \
185                 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
186                 "spl export fdt ${loadaddr};" \
187                 "setenv nor_img_addr ${fdtargsaddr};" \
188                 "setenv nor_img_size 0x20000;" \
189                 "setenv nor_bank_start " \
190                                 __stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
191                 "run nor_update\0" \
192         "tftp_nor_uboot="\
193                 "echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
194                 "setenv nor_img_file u-boot.img; " \
195                 "setenv nor_img_size 0x80000; " \
196                 "setenv nor_bank_start 0x08080000; " \
197                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
198                     "run nor_update;" \
199                 "fi\0" \
200         "tftp_nor_fitImg="\
201                 "echo 'Update mccmon6 NOR fitImage via TFTP'; " \
202                 "setenv nor_img_file fitImage; " \
203                 "setenv nor_img_size 0x500000; " \
204                 "setenv nor_bank_start 0x08180000; " \
205                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
206                     "run nor_update;" \
207                 "fi\0" \
208         "tftp_nor_img="\
209                 "echo 'Update mccmon6 NOR image via TFTP'; " \
210                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
211                     "run nor_update;" \
212                 "fi\0" \
213         "tftp_nor_SPL="\
214                 "if tftp ${load_addr} SPL_padded; then " \
215                     "erase 0x08000000 +0x20000;" \
216                     "cp.b ${load_addr} 0x08000000 0x20000;" \
217                 "fi;\0" \
218         "tftp_sd_SPL="\
219             "if mmc dev 1; then "      \
220                 "if tftp ${load_addr} ${SPL_file}; then " \
221                     "setexpr fw_sz ${filesize} / 0x200; " \
222                     "setexpr fw_sz ${fw_sz} + 1; " \
223                     "mmc write ${load_addr} 0x2 ${fw_sz};" \
224                 "fi;" \
225             "fi;\0" \
226         "tftp_sd_uboot="\
227             "if mmc dev 1; then "      \
228                 "if run load_uboot; then " \
229                     "setexpr fw_sz ${filesize} / 0x200; " \
230                     "setexpr fw_sz ${fw_sz} + 1; " \
231                     "mmc write ${load_addr} 0x8A ${fw_sz};" \
232                 "fi;" \
233             "fi;\0"
234
235 /* Physical Memory Map */
236 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
237
238 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
239 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
240 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
241
242 #define CONFIG_SYS_INIT_SP_OFFSET \
243         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
244 #define CONFIG_SYS_INIT_SP_ADDR \
245         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
246
247 /* Environment organization */
248 #define CONFIG_ENV_SIZE                 (SZ_128K)
249
250 /* Envs are stored in NOR flash */
251 #define CONFIG_ENV_SECT_SIZE    (SZ_128K)
252 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
253
254 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
255 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_SYS_FLASH_BASE + 0x60000)
256 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
257
258 #endif                         /* __CONFIG_H * */