include/configs/ma5d4evk.h

   1 /*
   2  * DENX MA5D4 configuration
   3  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __MA5D4EVK_CONFIG_H__
   9 #define __MA5D4EVK_CONFIG_H__
  10
  11 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  12
  13 #include "at91-sama5_common.h"
  14 #undef CONFIG_BOOTARGS
  15 #define CONFIG_SYS_USE_SERIALFLASH      1
  16
  17 /*
  18  * Memory configurations
  19  */
  20 #define CONFIG_NR_DRAM_BANKS            1
  21 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
  22 #define CONFIG_SYS_SDRAM_SIZE           0x10000000
  23
  24 #ifdef CONFIG_SPL_BUILD
  25 #define CONFIG_SYS_INIT_SP_ADDR         0x210000
  26 #else
  27 #define CONFIG_SYS_INIT_SP_ADDR \
  28         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  29 #endif
  30
  31 /*
  32  * Environment
  33  */
  34 #define CONFIG_ENV_IS_IN_SPI_FLASH
  35 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  36 #define CONFIG_ENV_OFFSET               0x8000
  37 #define CONFIG_ENV_SIZE                 0x4000
  38 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  39 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  40 #define CONFIG_ENV_SECT_SIZE            0x1000
  41
  42 /*
  43  * U-Boot general configurations
  44  */
  45
  46 /*
  47  * Serial Driver
  48  */
  49 #define CONFIG_ATMEL_USART
  50 #define CONFIG_USART_BASE               ATMEL_BASE_USART0
  51 #define CONFIG_USART_ID                 ATMEL_ID_USART0
  52
  53 /*
  54  * Ethernet
  55  */
  56 #ifdef CONFIG_CMD_NET
  57 #define CONFIG_MACB
  58 #define CONFIG_RMII
  59 #define CONFIG_NET_RETRY_COUNT          20
  60 #define CONFIG_MACB_SEARCH_PHY
  61 #define CONFIG_ARP_TIMEOUT              200UL
  62 #define CONFIG_IP_DEFRAG
  63 #endif
  64
  65 /*
  66  * LCD
  67  */
  68 #ifdef CONFIG_LCD
  69 #define CONFIG_BMP_16BPP
  70 #define CONFIG_BMP_24BPP
  71 #define CONFIG_BMP_32BPP
  72 #define LCD_BPP                         LCD_COLOR16
  73 #define LCD_OUTPUT_BPP                  24
  74 #define CONFIG_ATMEL_HLCD
  75 #endif
  76
  77 /*
  78  * SD/MMC
  79  */
  80 #ifdef CONFIG_CMD_MMC
  81 #define CONFIG_GENERIC_ATMEL_MCI
  82 #endif
  83
  84 /*
  85  * SPI NOR (boot memory)
  86  */
  87 #ifdef CONFIG_CMD_SF
  88 #define CONFIG_ATMEL_SPI
  89 #define CONFIG_ATMEL_SPI0
  90 #define CONFIG_SPI_FLASH_ATMEL
  91 #define CONFIG_SF_DEFAULT_BUS           0
  92 #define CONFIG_SF_DEFAULT_CS            0
  93 #define CONFIG_SF_DEFAULT_SPEED         30000000
  94 #endif
  95
  96 /*
  97  * USB
  98  */
  99 #ifdef CONFIG_CMD_USB
 100 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
 101
 102 /* USB device */
 103 #define CONFIG_USB_ETHER
 104 #define CONFIG_USB_ETH_RNDIS
 105 #define CONFIG_USBNET_MANUFACTURER      "DENX"
 106 #endif
 107
 108 /*
 109  * Boot Linux
 110  */
 111 #define CONFIG_CMDLINE_TAG
 112 #define CONFIG_INITRD_TAG
 113 #define CONFIG_SETUP_MEMORY_TAGS
 114 #define CONFIG_BOOTFILE         "fitImage"
 115 #define CONFIG_BOOTARGS         "console=ttyS3,115200"
 116 #define CONFIG_LOADADDR         0x20800000
 117 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 118 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 119
 120 /*
 121  * Extra Environments
 122  */
 123 #define CONFIG_PREBOOT          "run try_bootscript"
 124 #define CONFIG_HOSTNAME         ma5d4evk
 125
 126 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 127         "consdev=ttyS3\0"                                               \
 128         "baudrate=115200\0"                                             \
 129         "bootscript=boot.scr\0"                                         \
 130         "bootdev=/dev/mmcblk1p1\0"                                      \
 131         "bootpart=1:1\0"                                                \
 132         "rootdev=/dev/mmcblk1p2\0"                                      \
 133         "netdev=eth0\0"                                                 \
 134         "kernel_addr_r=0x22000000\0"                                    \
 135         "update_spi_firmware_spl_addr=0x21000000\0"                     \
 136         "update_spi_firmware_spl_filename=boot.bin\0"                   \
 137         "update_spi_firmware_addr=0x22000000\0"                         \
 138         "update_spi_firmware_filename=u-boot.img\0"                     \
 139         "update_spi_firmware="  /* Update the SPI flash firmware */     \
 140                 "if sf probe ; then "                                   \
 141                 "if tftp ${update_spi_firmware_spl_addr} "              \
 142                         "${update_spi_firmware_spl_filename} ; then "   \
 143                 "setenv update_spi_firmware_spl_filesize ${filesize} ; "\
 144                 "if tftp ${update_spi_firmware_addr} "                  \
 145                         "${update_spi_firmware_filename} ; then "       \
 146                 "setenv update_spi_firmware_filesize ${filesize} ; "    \
 147                 "sf update ${update_spi_firmware_spl_addr} 0x0 "        \
 148                         "${update_spi_firmware_spl_filesize} ; "        \
 149                 "sf update ${update_spi_firmware_addr} 0x10000 "        \
 150                         "${update_spi_firmware_filesize} ; "            \
 151                 "fi ; "                                                 \
 152                 "fi ; "                                                 \
 153                 "fi\0"                                                  \
 154         "addcons="                                                      \
 155                 "setenv bootargs ${bootargs} "                          \
 156                 "console=${consdev},${baudrate}\0"                      \
 157         "addip="                                                        \
 158                 "setenv bootargs ${bootargs} "                          \
 159                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 160                         "${netmask}:${hostname}:${netdev}:off\0"        \
 161         "addmisc="                                                      \
 162                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 163         "addargs=run addcons addmisc\0"                                 \
 164         "mmcload="                                                      \
 165                 "mmc rescan ; "                                         \
 166                 "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"   \
 167         "netload="                                                      \
 168                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 169         "miscargs=nohlt panic=1\0"                                      \
 170         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 171         "nfsargs="                                                      \
 172                 "setenv bootargs root=/dev/nfs rw "                     \
 173                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 174         "mmc_mmc="                                                      \
 175                 "run mmcload mmcargs addargs ; "                        \
 176                 "bootm ${kernel_addr_r}\0"                              \
 177         "mmc_nfs="                                                      \
 178                 "run mmcload nfsargs addip addargs ; "                  \
 179                 "bootm ${kernel_addr_r}\0"                              \
 180         "net_mmc="                                                      \
 181                 "run netload mmcargs addargs ; "                        \
 182                 "bootm ${kernel_addr_r}\0"                              \
 183         "net_nfs="                                                      \
 184                 "run netload nfsargs addip addargs ; "                  \
 185                 "bootm ${kernel_addr_r}\0"                              \
 186         "try_bootscript="                                               \
 187                 "mmc rescan;"                                           \
 188                 "if test -e mmc ${bootpart} ${bootscript} ; then "      \
 189                 "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
 190                 "then ; "                                               \
 191                         "echo Running bootscript... ; "                 \
 192                         "source ${kernel_addr_r} ; "                    \
 193                 "fi ; "                                                 \
 194                 "fi\0"
 195 /* SPL */
 196 #define CONFIG_SPL_FRAMEWORK
 197 #define CONFIG_SPL_TEXT_BASE            0x200000
 198 #define CONFIG_SPL_MAX_SIZE             0x10000
 199 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 200 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 201 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 202 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 203
 204 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 205
 206 #define CONFIG_SPL_SPI_LOAD
 207 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x10000
 208
 209 #endif  /* __MA5D4EVK_CONFIG_H__ */