include/configs/ma5d4evk.h

   1 /*
   2  * Aries MA5D4 configuration
   3  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __MA5D4EVK_CONFIG_H__
   9 #define __MA5D4EVK_CONFIG_H__
  10
  11 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  12
  13 #include "at91-sama5_common.h"
  14 #undef CONFIG_BOOTARGS
  15 #define CONFIG_SYS_USE_SERIALFLASH      1
  16 #define CONFIG_BOARD_LATE_INIT
  17
  18 /*
  19  * Memory configurations
  20  */
  21 #define CONFIG_NR_DRAM_BANKS            1
  22 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
  23 #define CONFIG_SYS_SDRAM_SIZE           0x10000000
  24
  25 #ifdef CONFIG_SPL_BUILD
  26 #define CONFIG_SYS_INIT_SP_ADDR         0x210000
  27 #else
  28 #define CONFIG_SYS_INIT_SP_ADDR \
  29         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  30 #endif
  31
  32 /*
  33  * Environment
  34  */
  35 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  36 #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
  37 #define CONFIG_ENV_SIZE                 0x4000
  38 #define CONFIG_SYS_MMC_ENV_DEV          0       /* eMMC */
  39 #define CONFIG_ENV_OFFSET               512     /* just after the MBR */
  40
  41 /*
  42  * U-Boot general configurations
  43  */
  44
  45 /*
  46  * Serial Driver
  47  */
  48 #define CONFIG_ATMEL_USART
  49 #define CONFIG_USART_BASE               ATMEL_BASE_USART0
  50 #define CONFIG_USART_ID                 ATMEL_ID_USART0
  51
  52 /*
  53  * Ethernet
  54  */
  55 #ifdef CONFIG_CMD_NET
  56 #define CONFIG_MACB
  57 #define CONFIG_RMII
  58 #define CONFIG_NET_RETRY_COUNT          20
  59 #define CONFIG_MACB_SEARCH_PHY
  60 #define CONFIG_ARP_TIMEOUT              200UL
  61 #define CONFIG_IP_DEFRAG
  62 #endif
  63
  64 /*
  65  * LCD
  66  */
  67 #ifdef CONFIG_LCD
  68 #define CONFIG_BMP_16BPP
  69 #define CONFIG_BMP_24BPP
  70 #define CONFIG_BMP_32BPP
  71 #define LCD_BPP                         LCD_COLOR16
  72 #define LCD_OUTPUT_BPP                  24
  73 #define CONFIG_ATMEL_HLCD
  74 #endif
  75
  76 /*
  77  * SD/MMC
  78  */
  79 #ifdef CONFIG_CMD_MMC
  80 #define CONFIG_GENERIC_ATMEL_MCI
  81 #endif
  82
  83 /*
  84  * SPI NOR (boot memory)
  85  */
  86 #ifdef CONFIG_CMD_SF
  87 #define CONFIG_ATMEL_SPI
  88 #define CONFIG_ATMEL_SPI0
  89 #define CONFIG_SPI_FLASH_ATMEL
  90 #define CONFIG_SF_DEFAULT_BUS           0
  91 #define CONFIG_SF_DEFAULT_CS            0
  92 #define CONFIG_SF_DEFAULT_SPEED         30000000
  93 #endif
  94
  95 /*
  96  * USB
  97  */
  98 #ifdef CONFIG_CMD_USB
  99 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
 100
 101 /* USB device */
 102 #define CONFIG_USB_ETHER
 103 #define CONFIG_USB_ETH_RNDIS
 104 #define CONFIG_USBNET_MANUFACTURER      "AriesEmbedded"
 105 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 106 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (1 * 1024 * 1024)
 107 #define DFU_DEFAULT_POLL_TIMEOUT        300
 108 #endif
 109
 110 /*
 111  * Boot Linux
 112  */
 113 #define CONFIG_CMDLINE_TAG
 114 #define CONFIG_INITRD_TAG
 115 #define CONFIG_SETUP_MEMORY_TAGS
 116 #define CONFIG_BOOTFILE         "fitImage"
 117 #define CONFIG_BOOTARGS         "console=ttyS3,115200"
 118 #define CONFIG_LOADADDR         0x20800000
 119 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 120 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 121
 122 /*
 123  * Extra Environments
 124  */
 125 #define CONFIG_PREBOOT          "run try_bootscript"
 126 #define CONFIG_HOSTNAME         ma5d4evk
 127
 128 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 129         "consdev=ttyS3\0"                                               \
 130         "baudrate=115200\0"                                             \
 131         "bootscript=boot.scr\0"                                         \
 132         "bootdev=/dev/mmcblk0p1\0"                                      \
 133         "bootpart=0:1\0"                                                \
 134         "rootdev=/dev/mmcblk0p2\0"                                      \
 135         "netdev=eth0\0"                                                 \
 136         "dfu_alt_info=mmc raw 0 3867148288\0"                           \
 137         "kernel_addr_r=0x22000000\0"                                    \
 138         "update_spi_firmware_spl_addr=0x21000000\0"                     \
 139         "update_spi_firmware_spl_filename=boot.bin\0"                   \
 140         "update_spi_firmware_addr=0x22000000\0"                         \
 141         "update_spi_firmware_filename=u-boot.img\0"                     \
 142         "update_spi_firmware="  /* Update the SPI flash firmware */     \
 143                 "if sf probe ; then "                                   \
 144                 "if tftp ${update_spi_firmware_spl_addr} "              \
 145                         "${update_spi_firmware_spl_filename} ; then "   \
 146                 "setenv update_spi_firmware_spl_filesize ${filesize} ; "\
 147                 "if tftp ${update_spi_firmware_addr} "                  \
 148                         "${update_spi_firmware_filename} ; then "       \
 149                 "setenv update_spi_firmware_filesize ${filesize} ; "    \
 150                 "sf update ${update_spi_firmware_spl_addr} 0x0 "        \
 151                         "${update_spi_firmware_spl_filesize} ; "        \
 152                 "sf update ${update_spi_firmware_addr} 0x10000 "        \
 153                         "${update_spi_firmware_filesize} ; "            \
 154                 "fi ; "                                                 \
 155                 "fi ; "                                                 \
 156                 "fi\0"                                                  \
 157         "addcons="                                                      \
 158                 "setenv bootargs ${bootargs} "                          \
 159                 "console=${consdev},${baudrate}\0"                      \
 160         "addip="                                                        \
 161                 "setenv bootargs ${bootargs} "                          \
 162                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 163                         "${netmask}:${hostname}:${netdev}:off\0"        \
 164         "addmisc="                                                      \
 165                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 166         "addargs=run addcons addmisc\0"                                 \
 167         "mmcload="                                                      \
 168                 "mmc rescan ; "                                         \
 169                 "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"   \
 170         "netload="                                                      \
 171                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 172         "miscargs=nohlt panic=1\0"                                      \
 173         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 174         "nfsargs="                                                      \
 175                 "setenv bootargs root=/dev/nfs rw "                     \
 176                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 177         "fdtimg=if test ${bootmode} = \"sf\" ; then "                   \
 178                         "setenv kernel_fdt 1 ; "                        \
 179                 "else ; "                                               \
 180                         "setenv kernel_fdt 2 ; "                        \
 181                 "fi\0"                                                  \
 182         "mmc_mmc="                                                      \
 183                 "run fdtimg mmcload mmcargs addargs ; "                 \
 184                 "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 185         "mmc_nfs="                                                      \
 186                 "run fdtimg mmcload nfsargs addip addargs ; "                   \
 187                 "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 188         "net_mmc="                                                      \
 189                 "run fdtimg netload mmcargs addargs ; "                 \
 190                 "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 191         "net_nfs="                                                      \
 192                 "run fdtimg netload nfsargs addip addargs ; "                   \
 193                 "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 194         "try_bootscript="                                               \
 195                 "mmc rescan;"                                           \
 196                 "if test -e mmc 1:1 ${bootscript} ; then "              \
 197                 "if load mmc 1:1 ${kernel_addr_r} ${bootscript};"       \
 198                 "then ; "                                               \
 199                         "echo Running bootscript... ; "                 \
 200                         "source ${kernel_addr_r} ; "                    \
 201                 "fi ; "                                                 \
 202                 "fi\0"
 203 /* SPL */
 204 #define CONFIG_SPL_FRAMEWORK
 205 #define CONFIG_SPL_TEXT_BASE            0x200000
 206 #define CONFIG_SPL_MAX_SIZE             0x10000
 207 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 208 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 209 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 210 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 211
 212 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 213
 214 #define CONFIG_SPL_SPI_LOAD
 215 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x10000
 216
 217 #define CONFIG_SYS_USE_MMC
 218 #define CONFIG_SPL_LDSCRIPT             arch/arm/mach-at91/armv7/u-boot-spl.lds
 219 #define CONFIG_SPL_MMC_SUPPORT
 220 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 221 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 222 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 223 #define CONFIG_SPL_FAT_SUPPORT
 224 #define CONFIG_SPL_LIBDISK_SUPPORT
 225
 226 #endif  /* __MA5D4EVK_CONFIG_H__ */