include/configs/m53menlo.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2
   3 /*
   4  * Menlosystems M53Menlo configuration
   5  * Copyright (C) 2012-2017 Marek Vasut <marex@denx.de>
   6  * Copyright (C) 2014-2017 Olaf Mandel <o.mandel@menlosystems.com>
   7  */
   8
   9 #ifndef __M53MENLO_CONFIG_H__
  10 #define __M53MENLO_CONFIG_H__
  11
  12 #include <asm/arch/imx-regs.h>
  13
  14 #define CONFIG_REVISION_TAG
  15 #define CONFIG_SYS_FSL_CLK
  16
  17 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  18
  19 /*
  20  * Memory configurations
  21  */
  22 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
  23 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
  24 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
  25 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
  26 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  27 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  28 #define CONFIG_SYS_MEMTEST_START        0x70000000
  29 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
  30
  31 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
  32 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
  33 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
  34
  35 #define CONFIG_SYS_INIT_SP_OFFSET \
  36         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  37 #define CONFIG_SYS_INIT_SP_ADDR \
  38         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  39
  40 /*
  41  * U-Boot general configurations
  42  */
  43 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  44 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  45 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  46                                                 /* Boot argument buffer size */
  47
  48 /*
  49  * Serial Driver
  50  */
  51 #define CONFIG_MXC_UART
  52 #define CONFIG_MXC_UART_BASE            UART1_BASE
  53
  54 /*
  55  * MMC Driver
  56  */
  57 #ifdef CONFIG_CMD_MMC
  58 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  59 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  60 #endif
  61
  62 /*
  63  * NAND
  64  */
  65 #ifdef CONFIG_CMD_NAND
  66 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  67 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
  68 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
  69 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
  70 #define CONFIG_SYS_NAND_LARGEPAGE
  71 #define CONFIG_MXC_NAND_HWECC
  72
  73 /* Environment is in NAND */
  74 #define CONFIG_ENV_RANGE                (0x00080000) /* 512 KiB */
  75 #endif
  76
  77 /*
  78  * Ethernet on SOC (FEC)
  79  */
  80 #ifdef CONFIG_CMD_NET
  81 #define CONFIG_FEC_MXC
  82 #define IMX_FEC_BASE                    FEC_BASE_ADDR
  83 #define CONFIG_FEC_MXC_PHYADDR          0x0
  84 #define CONFIG_MII
  85 #define CONFIG_DISCOVER_PHY
  86 #define CONFIG_FEC_XCV_TYPE             RMII
  87 #define CONFIG_ETHPRIME                 "FEC0"
  88 #endif
  89
  90 /*
  91  * I2C
  92  */
  93 #ifdef CONFIG_CMD_I2C
  94 #define CONFIG_SYS_I2C
  95 #define CONFIG_SYS_I2C_MXC
  96 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  97 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  98 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  99 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
 100 #endif
 101
 102 /*
 103  * RTC
 104  */
 105 #ifdef CONFIG_CMD_DATE
 106 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 107 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 108 #endif
 109
 110 /*
 111  * USB
 112  */
 113 #ifdef CONFIG_CMD_USB
 114 #define CONFIG_MXC_USB_PORT             1
 115 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 116 #define CONFIG_MXC_USB_FLAGS            0
 117 #endif
 118
 119 /*
 120  * SATA
 121  */
 122 #ifdef CONFIG_CMD_SATA
 123 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 124 #define CONFIG_DWC_AHSATA_PORT_ID       0
 125 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 126 #define CONFIG_LBA48
 127 #endif
 128
 129 /*
 130  * LCD
 131  */
 132 #define CONFIG_VIDEO_BMP_RLE8
 133 #define CONFIG_VIDEO_BMP_GZIP
 134 #define CONFIG_SPLASH_SCREEN
 135 #define CONFIG_SPLASHIMAGE_GUARD
 136 #define CONFIG_SPLASH_SCREEN_ALIGN
 137 #define CONFIG_BMP_16BPP
 138 #define CONFIG_VIDEO_LOGO
 139 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
 140
 141 /* LVDS display */
 142 #define CONFIG_SYS_LDB_CLOCK                    33260000
 143 #define CONFIG_IMX_VIDEO_SKIP
 144 #define CONFIG_SPLASH_SOURCE
 145
 146 /* IIM Fuses */
 147 #define CONFIG_FSL_IIM
 148
 149 /* Watchdog */
 150
 151 /*
 152  * Boot Linux
 153  */
 154 #define CONFIG_CMDLINE_TAG
 155 #define CONFIG_INITRD_TAG
 156 #define CONFIG_REVISION_TAG
 157 #define CONFIG_SETUP_MEMORY_TAGS
 158 #define CONFIG_BOOTFILE         "boot/fitImage"
 159 #define CONFIG_LOADADDR         0x70800000
 160 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 161 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 162
 163 /*
 164  * NAND SPL
 165  */
 166 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
 167 #define CONFIG_SPL_PAD_TO               0x8000
 168 #define CONFIG_SPL_STACK                0x70004000
 169
 170 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 171 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 172 #define CONFIG_SYS_NAND_OOBSIZE         64
 173 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 174 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 175 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 176
 177 /*
 178  * Extra Environments
 179  */
 180 #define CONFIG_HOSTNAME         "m53menlo"
 181
 182 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 183         "consdev=ttymxc0\0"                                             \
 184         "baudrate=115200\0"                                             \
 185         "bootscript=boot.scr\0"                                         \
 186         "mmcdev=0\0"                                                    \
 187         "mmcpart=1\0"                                                   \
 188         "rootpath=/srv/\0"                                              \
 189         "kernel_addr_r=0x72000000\0"                                    \
 190         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                            \
 191         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                        \
 192         "netdev=eth0\0"                                                 \
 193         "splashsource=mmc_fs\0"                                         \
 194         "splashfile=boot/usplash.bmp.gz\0"                              \
 195         "splashimage=0x88000000\0"                                      \
 196         "splashpos=m,m\0"                                               \
 197         "stdout=serial,vidconsole\0"                                    \
 198         "stderr=serial,vidconsole\0"                                    \
 199         "addcons="                                                      \
 200                 "setenv bootargs ${bootargs} "                          \
 201                 "console=${consdev},${baudrate}\0"                      \
 202         "addip="                                                        \
 203                 "setenv bootargs ${bootargs} "                          \
 204                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 205                 ":${hostname}:${netdev}:off\0"                          \
 206         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 207         "addmisc="                                                      \
 208                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 209         "addargs=run addcons addmisc addmtd\0"                          \
 210         "mmcload="                                                      \
 211                 "mmc rescan ; load mmc ${mmcdev}:${mmcpart} "           \
 212                 "${kernel_addr_r} ${bootfile}\0"                        \
 213         "miscargs=nohlt panic=1\0"                                      \
 214         "mmcargs=setenv bootargs root=/dev/mmcblk0p${mmcpart} rw "      \
 215                 "rootwait\0"                                            \
 216         "mmc_mmc="                                                      \
 217                 "run mmcload mmcargs addargs ; "                        \
 218                 "bootm ${kernel_addr_r}\0"                              \
 219         "netload=tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 220         "net_nfs="                                                      \
 221                 "run netload nfsargs addip addargs ; "                  \
 222                 "bootm ${kernel_addr_r}\0"                              \
 223         "nfsargs="                                                      \
 224                 "setenv bootargs root=/dev/nfs rw "                     \
 225                 "nfsroot=${serverip}:${rootpath}${hostname},v3,tcp\0"   \
 226         "try_bootscript="                                               \
 227                 "mmc rescan;"                                           \
 228                 "if test -e mmc 0:1 ${bootscript} ; then "              \
 229                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
 230                 "then ; "                                               \
 231                         "echo Running bootscript... ; "                 \
 232                         "source ${kernel_addr_r} ; "                    \
 233                 "fi ; "                                                 \
 234                 "fi\0"
 235
 236 #if defined(CONFIG_SPL_BUILD)
 237 #undef CONFIG_WATCHDOG
 238 #define CONFIG_HW_WATCHDOG
 239 #endif
 240
 241 #endif  /* __M53MENLO_CONFIG_H__ */