include/configs/m53menlo.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2
   3 /*
   4  * Menlosystems M53Menlo configuration
   5  * Copyright (C) 2012-2017 Marek Vasut <marex@denx.de>
   6  * Copyright (C) 2014-2017 Olaf Mandel <o.mandel@menlosystems.com>
   7  */
   8
   9 #ifndef __M53MENLO_CONFIG_H__
  10 #define __M53MENLO_CONFIG_H__
  11
  12 #include <asm/arch/imx-regs.h>
  13
  14 #define CONFIG_REVISION_TAG
  15 #define CONFIG_SYS_FSL_CLK
  16
  17 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  18
  19 /*
  20  * Memory configurations
  21  */
  22 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
  23 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
  24 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
  25 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
  26 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  27
  28 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
  29 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
  30 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
  31
  32 #define CONFIG_SYS_INIT_SP_OFFSET \
  33         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  34 #define CONFIG_SYS_INIT_SP_ADDR \
  35         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  36
  37 /*
  38  * U-Boot general configurations
  39  */
  40 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  41 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  42 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  43                                                 /* Boot argument buffer size */
  44
  45 /*
  46  * Serial Driver
  47  */
  48 #define CONFIG_MXC_UART_BASE            UART1_BASE
  49
  50 /*
  51  * MMC Driver
  52  */
  53 #ifdef CONFIG_CMD_MMC
  54 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  55 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  56 #endif
  57
  58 /*
  59  * NAND
  60  */
  61 #ifdef CONFIG_CMD_NAND
  62 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  63 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
  64 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
  65 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
  66 #define CONFIG_SYS_NAND_LARGEPAGE
  67 #define CONFIG_MXC_NAND_HWECC
  68
  69 /* Environment is in NAND */
  70 #define CONFIG_ENV_RANGE                (0x00080000) /* 512 KiB */
  71 #endif
  72
  73 /*
  74  * Ethernet on SOC (FEC)
  75  */
  76 #ifdef CONFIG_CMD_NET
  77 #define CONFIG_FEC_MXC
  78 #define IMX_FEC_BASE                    FEC_BASE_ADDR
  79 #define CONFIG_FEC_MXC_PHYADDR          0x0
  80 #define CONFIG_MII
  81 #define CONFIG_DISCOVER_PHY
  82 #define CONFIG_FEC_XCV_TYPE             RMII
  83 #define CONFIG_ETHPRIME                 "FEC0"
  84 #endif
  85
  86 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
  87
  88 /*
  89  * RTC
  90  */
  91 #ifdef CONFIG_CMD_DATE
  92 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
  93 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
  94 #endif
  95
  96 /*
  97  * USB
  98  */
  99 #ifdef CONFIG_CMD_USB
 100 #define CONFIG_MXC_USB_PORT             1
 101 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 102 #define CONFIG_MXC_USB_FLAGS            0
 103 #endif
 104
 105 /*
 106  * SATA
 107  */
 108 #ifdef CONFIG_CMD_SATA
 109 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 110 #define CONFIG_DWC_AHSATA_PORT_ID       0
 111 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 112 #define CONFIG_LBA48
 113 #endif
 114
 115 /*
 116  * LCD
 117  */
 118 #define CONFIG_VIDEO_LOGO
 119 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
 120
 121 /* LVDS display */
 122 #define CONFIG_SYS_LDB_CLOCK                    33260000
 123 #define CONFIG_IMX_VIDEO_SKIP
 124
 125 /* IIM Fuses */
 126 #define CONFIG_FSL_IIM
 127
 128 /* Watchdog */
 129
 130 /*
 131  * Boot Linux
 132  */
 133 #define CONFIG_CMDLINE_TAG
 134 #define CONFIG_INITRD_TAG
 135 #define CONFIG_REVISION_TAG
 136 #define CONFIG_SETUP_MEMORY_TAGS
 137 #define CONFIG_BOOTFILE         "boot/fitImage"
 138 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 139
 140 /*
 141  * NAND SPL
 142  */
 143 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
 144 #define CONFIG_SPL_PAD_TO               0x8000
 145 #define CONFIG_SPL_STACK                0x70004000
 146
 147 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 148 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 149 #define CONFIG_SYS_NAND_OOBSIZE         64
 150 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 151 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 152 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 153
 154 /*
 155  * Extra Environments
 156  */
 157 #define CONFIG_HOSTNAME         "m53menlo"
 158
 159 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 160         "consdev=ttymxc0\0"                                             \
 161         "baudrate=115200\0"                                             \
 162         "bootscript=boot.scr\0"                                         \
 163         "mmcdev=0\0"                                                    \
 164         "mmcpart=1\0"                                                   \
 165         "rootpath=/srv/\0"                                              \
 166         "kernel_addr_r=0x72000000\0"                                    \
 167         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                            \
 168         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                        \
 169         "netdev=eth0\0"                                                 \
 170         "splashsource=mmc_fs\0"                                         \
 171         "splashfile=boot/usplash.bmp.gz\0"                              \
 172         "splashimage=0x88000000\0"                                      \
 173         "splashpos=m,m\0"                                               \
 174         "stdout=serial,vidconsole\0"                                    \
 175         "stderr=serial,vidconsole\0"                                    \
 176         "addcons="                                                      \
 177                 "setenv bootargs ${bootargs} "                          \
 178                 "console=${consdev},${baudrate}\0"                      \
 179         "addip="                                                        \
 180                 "setenv bootargs ${bootargs} "                          \
 181                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 182                 ":${hostname}:${netdev}:off\0"                          \
 183         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 184         "addmisc="                                                      \
 185                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 186         "addargs=run addcons addmisc addmtd\0"                          \
 187         "mmcload="                                                      \
 188                 "mmc rescan ; load mmc ${mmcdev}:${mmcpart} "           \
 189                 "${kernel_addr_r} ${bootfile}\0"                        \
 190         "miscargs=nohlt panic=1\0"                                      \
 191         "mmcargs=setenv bootargs root=/dev/mmcblk0p${mmcpart} rw "      \
 192                 "rootwait\0"                                            \
 193         "mmc_mmc="                                                      \
 194                 "run mmcload mmcargs addargs ; "                        \
 195                 "bootm ${kernel_addr_r}\0"                              \
 196         "netload=tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 197         "net_nfs="                                                      \
 198                 "run netload nfsargs addip addargs ; "                  \
 199                 "bootm ${kernel_addr_r}\0"                              \
 200         "nfsargs="                                                      \
 201                 "setenv bootargs root=/dev/nfs rw "                     \
 202                 "nfsroot=${serverip}:${rootpath}${hostname},v3,tcp\0"   \
 203         "try_bootscript="                                               \
 204                 "mmc rescan;"                                           \
 205                 "if test -e mmc 0:1 ${bootscript} ; then "              \
 206                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
 207                 "then ; "                                               \
 208                         "echo Running bootscript... ; "                 \
 209                         "source ${kernel_addr_r} ; "                    \
 210                 "fi ; "                                                 \
 211                 "fi\0"
 212
 213 #if defined(CONFIG_SPL_BUILD)
 214 #undef CONFIG_WATCHDOG
 215 #define CONFIG_HW_WATCHDOG
 216 #endif
 217
 218 #endif  /* __M53MENLO_CONFIG_H__ */