Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig
[platform/kernel/u-boot.git] / include / configs / m53evk.h
1 /*
2  * Aries M53 configuration
3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef __M53EVK_CONFIG_H__
9 #define __M53EVK_CONFIG_H__
10
11 #define CONFIG_MXC_GPIO
12
13 #include <asm/arch/imx-regs.h>
14
15 #define CONFIG_REVISION_TAG
16 #define CONFIG_SYS_FSL_CLK
17
18 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
19
20 /*
21  * Memory configurations
22  */
23 #define CONFIG_NR_DRAM_BANKS            2
24 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
25 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
26 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
27 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
28 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
29 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
30 #define CONFIG_SYS_MEMTEST_START        0x70000000
31 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
32
33 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
34 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
35 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
36
37 #define CONFIG_SYS_INIT_SP_OFFSET \
38         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
39 #define CONFIG_SYS_INIT_SP_ADDR \
40         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
41
42 #define CONFIG_SYS_TEXT_BASE            0x71000000
43
44 /*
45  * U-Boot general configurations
46  */
47 #define CONFIG_SYS_LONGHELP
48 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
49 #define CONFIG_SYS_PBSIZE       \
50         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
51                                                 /* Print buffer size */
52 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
53 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
54                                                 /* Boot argument buffer size */
55 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
56 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
57
58 /*
59  * Serial Driver
60  */
61 #define CONFIG_MXC_UART
62 #define CONFIG_MXC_UART_BASE            UART2_BASE
63 #define CONFIG_CONS_INDEX               1
64
65 /*
66  * MMC Driver
67  */
68 #ifdef CONFIG_CMD_MMC
69 #define CONFIG_FSL_ESDHC
70 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
71 #define CONFIG_SYS_FSL_ESDHC_NUM        1
72 #endif
73
74 /*
75  * NAND
76  */
77 #define CONFIG_ENV_SIZE                 (16 * 1024)
78 #ifdef CONFIG_CMD_NAND
79 #define CONFIG_SYS_MAX_NAND_DEVICE      1
80 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
81 #define CONFIG_NAND_MXC
82 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
83 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
84 #define CONFIG_SYS_NAND_LARGEPAGE
85 #define CONFIG_MXC_NAND_HWECC
86 #define CONFIG_SYS_NAND_USE_FLASH_BBT
87
88 /* Environment is in NAND */
89 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
90 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
91 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
92 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
93 #define CONFIG_ENV_OFFSET_REDUND        \
94                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
95
96 #define CONFIG_MTD_DEVICE
97 #define CONFIG_MTD_PARTITIONS
98 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
99 #define MTDPARTS_DEFAULT                        \
100         "mtdparts=mxc_nand:"                    \
101                 "1024k(u-boot),"                \
102                 "512k(env1),"                   \
103                 "512k(env2),"                   \
104                 "14m(boot),"                    \
105                 "240m(data),"                   \
106                 "-@2048k(UBI)"
107 #endif
108
109 /*
110  * Ethernet on SOC (FEC)
111  */
112 #ifdef CONFIG_CMD_NET
113 #define CONFIG_FEC_MXC
114 #define IMX_FEC_BASE                    FEC_BASE_ADDR
115 #define CONFIG_FEC_MXC_PHYADDR          0x0
116 #define CONFIG_MII
117 #define CONFIG_DISCOVER_PHY
118 #define CONFIG_FEC_XCV_TYPE             RMII
119 #define CONFIG_ETHPRIME                 "FEC0"
120 #endif
121
122 /*
123  * I2C
124  */
125 #ifdef CONFIG_CMD_I2C
126 #define CONFIG_SYS_I2C
127 #define CONFIG_SYS_I2C_MXC
128 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
129 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
130 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
131 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
132 #endif
133
134 /*
135  * RTC
136  */
137 #ifdef CONFIG_CMD_DATE
138 #define CONFIG_RTC_M41T62
139 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
140 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
141 #endif
142
143 /*
144  * USB
145  */
146 #ifdef CONFIG_CMD_USB
147 #define CONFIG_USB_EHCI_MX5
148 #define CONFIG_USB_HOST_ETHER
149 #define CONFIG_USB_ETHER_ASIX
150 #define CONFIG_USB_ETHER_MCS7830
151 #define CONFIG_USB_ETHER_SMSC95XX
152 #define CONFIG_MXC_USB_PORT             1
153 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
154 #define CONFIG_MXC_USB_FLAGS            0
155 #endif
156
157 /*
158  * SATA
159  */
160 #ifdef CONFIG_CMD_SATA
161 #define CONFIG_DWC_AHSATA
162 #define CONFIG_SYS_SATA_MAX_DEVICE      1
163 #define CONFIG_DWC_AHSATA_PORT_ID       0
164 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
165 #define CONFIG_LBA48
166 #define CONFIG_LIBATA
167 #endif
168
169 /*
170  * LCD
171  */
172 #ifdef CONFIG_VIDEO
173 #define CONFIG_VIDEO_IPUV3
174 #define CONFIG_VIDEO_BMP_RLE8
175 #define CONFIG_VIDEO_BMP_GZIP
176 #define CONFIG_SPLASH_SCREEN
177 #define CONFIG_SPLASHIMAGE_GUARD
178 #define CONFIG_SPLASH_SCREEN_ALIGN
179 #define CONFIG_BMP_16BPP
180 #define CONFIG_VIDEO_LOGO
181 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
182 #define CONFIG_IPUV3_CLK                200000000
183 #endif
184
185 /*
186  * Boot Linux
187  */
188 #define CONFIG_CMDLINE_TAG
189 #define CONFIG_INITRD_TAG
190 #define CONFIG_REVISION_TAG
191 #define CONFIG_SETUP_MEMORY_TAGS
192 #define CONFIG_BOOTFILE         "fitImage"
193 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
194 #define CONFIG_LOADADDR         0x70800000
195 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
196 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
197
198 /*
199  * NAND SPL
200  */
201 #define CONFIG_SPL_FRAMEWORK
202 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
203 #define CONFIG_SPL_TEXT_BASE            0x70008000
204 #define CONFIG_SPL_PAD_TO               0x8000
205 #define CONFIG_SPL_STACK                0x70004000
206
207 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
208 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
209 #define CONFIG_SYS_NAND_OOBSIZE         64
210 #define CONFIG_SYS_NAND_PAGE_COUNT      64
211 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
212 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
213
214 /*
215  * Extra Environments
216  */
217 #define CONFIG_PREBOOT          "run try_bootscript"
218 #define CONFIG_HOSTNAME         m53evk
219
220 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
221         "consdev=ttymxc1\0"                                             \
222         "baudrate=115200\0"                                             \
223         "bootscript=boot.scr\0"                                         \
224         "bootdev=/dev/mmcblk0p1\0"                                      \
225         "rootdev=/dev/mmcblk0p2\0"                                      \
226         "netdev=eth0\0"                                                 \
227         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
228         "kernel_addr_r=0x72000000\0"                                    \
229         "addcons="                                                      \
230                 "setenv bootargs ${bootargs} "                          \
231                 "console=${consdev},${baudrate}\0"                      \
232         "addip="                                                        \
233                 "setenv bootargs ${bootargs} "                          \
234                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
235                         "${netmask}:${hostname}:${netdev}:off\0"        \
236         "addmisc="                                                      \
237                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
238         "adddfltmtd="                                                   \
239                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
240                         "mtdparts default ; "                           \
241                 "fi\0"                                                  \
242         "addmtd="                                                       \
243                 "run adddfltmtd ; "                                     \
244                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
245         "addargs=run addcons addmtd addmisc\0"                          \
246         "mmcload="                                                      \
247                 "mmc rescan ; "                                         \
248                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
249         "ubiload="                                                      \
250                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
251                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
252         "netload="                                                      \
253                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
254         "miscargs=nohlt panic=1\0"                                      \
255         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
256         "ubiargs="                                                      \
257                 "setenv bootargs ubi.mtd=5 "                            \
258                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
259         "nfsargs="                                                      \
260                 "setenv bootargs root=/dev/nfs rw "                     \
261                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
262         "mmc_mmc="                                                      \
263                 "run mmcload mmcargs addargs ; "                        \
264                 "bootm ${kernel_addr_r}\0"                              \
265         "mmc_ubi="                                                      \
266                 "run mmcload ubiargs addargs ; "                        \
267                 "bootm ${kernel_addr_r}\0"                              \
268         "mmc_nfs="                                                      \
269                 "run mmcload nfsargs addip addargs ; "                  \
270                 "bootm ${kernel_addr_r}\0"                              \
271         "ubi_mmc="                                                      \
272                 "run ubiload mmcargs addargs ; "                        \
273                 "bootm ${kernel_addr_r}\0"                              \
274         "ubi_ubi="                                                      \
275                 "run ubiload ubiargs addargs ; "                        \
276                 "bootm ${kernel_addr_r}\0"                              \
277         "ubi_nfs="                                                      \
278                 "run ubiload nfsargs addip addargs ; "                  \
279                 "bootm ${kernel_addr_r}\0"                              \
280         "net_mmc="                                                      \
281                 "run netload mmcargs addargs ; "                        \
282                 "bootm ${kernel_addr_r}\0"                              \
283         "net_ubi="                                                      \
284                 "run netload ubiargs addargs ; "                        \
285                 "bootm ${kernel_addr_r}\0"                              \
286         "net_nfs="                                                      \
287                 "run netload nfsargs addip addargs ; "                  \
288                 "bootm ${kernel_addr_r}\0"                              \
289         "try_bootscript="                                               \
290                 "mmc rescan;"                                           \
291                 "if test -e mmc 0:1 ${bootscript} ; then "              \
292                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
293                 "then ; "                                               \
294                         "echo Running bootscript... ; "                 \
295                         "source ${kernel_addr_r} ; "                    \
296                 "fi ; "                                                 \
297                 "fi\0"
298
299 #endif  /* __M53EVK_CONFIG_H__ */