include/configs/m53evk.h

   1 /*
   2  * DENX M53 configuration
   3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __M53EVK_CONFIG_H__
   9 #define __M53EVK_CONFIG_H__
  10
  11 #define CONFIG_MX53
  12 #define CONFIG_MXC_GPIO
  13
  14 #include <asm/arch/imx-regs.h>
  15
  16 #define CONFIG_DISPLAY_CPUINFO
  17 #define CONFIG_BOARD_EARLY_INIT_F
  18 #define CONFIG_REVISION_TAG
  19 #define CONFIG_SYS_NO_FLASH
  20 #define CONFIG_SYS_FSL_CLK
  21
  22 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  23
  24 /*
  25  * U-Boot Commands
  26  */
  27 #define CONFIG_DISPLAY_BOARDINFO
  28 #define CONFIG_DOS_PARTITION
  29 #define CONFIG_FAT_WRITE
  30
  31 #define CONFIG_CMD_BMP
  32 #define CONFIG_CMD_DATE
  33 #define CONFIG_CMD_NAND
  34 #define CONFIG_CMD_NAND_TRIMFFS
  35 #define CONFIG_CMD_SATA
  36 #define CONFIG_VIDEO
  37
  38 /*
  39  * Memory configurations
  40  */
  41 #define CONFIG_NR_DRAM_BANKS            2
  42 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
  43 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
  44 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
  45 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
  46 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  47 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  48 #define CONFIG_SYS_MEMTEST_START        0x70000000
  49 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
  50
  51 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
  52 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
  53 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
  54
  55 #define CONFIG_SYS_INIT_SP_OFFSET \
  56         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  57 #define CONFIG_SYS_INIT_SP_ADDR \
  58         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  59
  60 #define CONFIG_SYS_TEXT_BASE            0x71000000
  61
  62 /*
  63  * U-Boot general configurations
  64  */
  65 #define CONFIG_SYS_LONGHELP
  66 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  67 #define CONFIG_SYS_PBSIZE       \
  68         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  69                                                 /* Print buffer size */
  70 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  71 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  72                                                 /* Boot argument buffer size */
  73 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  74 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  75 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  76
  77 /*
  78  * Serial Driver
  79  */
  80 #define CONFIG_MXC_UART
  81 #define CONFIG_MXC_UART_BASE            UART2_BASE
  82 #define CONFIG_CONS_INDEX               1
  83 #define CONFIG_BAUDRATE                 115200
  84
  85 /*
  86  * MMC Driver
  87  */
  88 #ifdef CONFIG_CMD_MMC
  89 #define CONFIG_MMC
  90 #define CONFIG_GENERIC_MMC
  91 #define CONFIG_FSL_ESDHC
  92 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  93 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  94 #endif
  95
  96 /*
  97  * NAND
  98  */
  99 #define CONFIG_ENV_SIZE                 (16 * 1024)
 100 #ifdef CONFIG_CMD_NAND
 101 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 102 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
 103 #define CONFIG_NAND_MXC
 104 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
 105 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
 106 #define CONFIG_SYS_NAND_LARGEPAGE
 107 #define CONFIG_MXC_NAND_HWECC
 108 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 109
 110 /* Environment is in NAND */
 111 #define CONFIG_ENV_IS_IN_NAND
 112 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 113 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 114 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
 115 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
 116 #define CONFIG_ENV_OFFSET_REDUND        \
 117                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 118
 119 #define CONFIG_CMD_UBI
 120 #define CONFIG_CMD_UBIFS
 121 #define CONFIG_CMD_MTDPARTS
 122 #define CONFIG_RBTREE
 123 #define CONFIG_LZO
 124 #define CONFIG_MTD_DEVICE
 125 #define CONFIG_MTD_PARTITIONS
 126 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
 127 #define MTDPARTS_DEFAULT                        \
 128         "mtdparts=mxc_nand:"                    \
 129                 "1024k(u-boot),"                \
 130                 "512k(env1),"                   \
 131                 "512k(env2),"                   \
 132                 "14m(boot),"                    \
 133                 "240m(data),"                   \
 134                 "-@2048k(UBI)"
 135 #else
 136 #define CONFIG_ENV_IS_NOWHERE
 137 #endif
 138
 139 /*
 140  * Ethernet on SOC (FEC)
 141  */
 142 #ifdef CONFIG_CMD_NET
 143 #define CONFIG_FEC_MXC
 144 #define IMX_FEC_BASE                    FEC_BASE_ADDR
 145 #define CONFIG_FEC_MXC_PHYADDR          0x0
 146 #define CONFIG_MII
 147 #define CONFIG_DISCOVER_PHY
 148 #define CONFIG_FEC_XCV_TYPE             RMII
 149 #define CONFIG_PHYLIB
 150 #define CONFIG_PHY_MICREL
 151 #define CONFIG_ETHPRIME                 "FEC0"
 152 #endif
 153
 154 /*
 155  * I2C
 156  */
 157 #ifdef CONFIG_CMD_I2C
 158 #define CONFIG_SYS_I2C
 159 #define CONFIG_SYS_I2C_MXC
 160 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 161 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 162 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 163 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
 164 #endif
 165
 166 /*
 167  * RTC
 168  */
 169 #ifdef CONFIG_CMD_DATE
 170 #define CONFIG_RTC_M41T62
 171 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 172 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 173 #endif
 174
 175 /*
 176  * USB
 177  */
 178 #ifdef CONFIG_CMD_USB
 179 #define CONFIG_USB_EHCI
 180 #define CONFIG_USB_EHCI_MX5
 181 #define CONFIG_USB_STORAGE
 182 #define CONFIG_USB_HOST_ETHER
 183 #define CONFIG_USB_ETHER_ASIX
 184 #define CONFIG_USB_ETHER_MCS7830
 185 #define CONFIG_USB_ETHER_SMSC95XX
 186 #define CONFIG_MXC_USB_PORT             1
 187 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 188 #define CONFIG_MXC_USB_FLAGS            0
 189 #endif
 190
 191 /*
 192  * SATA
 193  */
 194 #ifdef CONFIG_CMD_SATA
 195 #define CONFIG_DWC_AHSATA
 196 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 197 #define CONFIG_DWC_AHSATA_PORT_ID       0
 198 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 199 #define CONFIG_LBA48
 200 #define CONFIG_LIBATA
 201 #endif
 202
 203 /*
 204  * LCD
 205  */
 206 #ifdef CONFIG_VIDEO
 207 #define CONFIG_VIDEO_IPUV3
 208 #define CONFIG_CFB_CONSOLE
 209 #define CONFIG_VGA_AS_SINGLE_DEVICE
 210 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 211 #define CONFIG_VIDEO_BMP_RLE8
 212 #define CONFIG_VIDEO_BMP_GZIP
 213 #define CONFIG_SPLASH_SCREEN
 214 #define CONFIG_SPLASHIMAGE_GUARD
 215 #define CONFIG_SPLASH_SCREEN_ALIGN
 216 #define CONFIG_BMP_16BPP
 217 #define CONFIG_VIDEO_LOGO
 218 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
 219 #define CONFIG_IPUV3_CLK                200000000
 220 #endif
 221
 222 /*
 223  * Boot Linux
 224  */
 225 #define CONFIG_CMDLINE_TAG
 226 #define CONFIG_INITRD_TAG
 227 #define CONFIG_REVISION_TAG
 228 #define CONFIG_SETUP_MEMORY_TAGS
 229 #define CONFIG_BOOTFILE         "fitImage"
 230 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
 231 #define CONFIG_LOADADDR         0x70800000
 232 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 233 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 234
 235 /*
 236  * NAND SPL
 237  */
 238 #define CONFIG_SPL_FRAMEWORK
 239 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
 240 #define CONFIG_SPL_BOARD_INIT
 241 #define CONFIG_SPL_TEXT_BASE            0x70008000
 242 #define CONFIG_SPL_PAD_TO               0x8000
 243 #define CONFIG_SPL_STACK                0x70004000
 244 #define CONFIG_SPL_GPIO_SUPPORT
 245 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 246 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 247 #define CONFIG_SPL_NAND_SUPPORT
 248 #define CONFIG_SPL_SERIAL_SUPPORT
 249
 250 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 251 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 252 #define CONFIG_SYS_NAND_OOBSIZE         64
 253 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 254 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 255 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 256
 257 /*
 258  * Extra Environments
 259  */
 260 #define CONFIG_PREBOOT          "run try_bootscript"
 261 #define CONFIG_HOSTNAME         m53evk
 262
 263 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 264         "consdev=ttymxc1\0"                                             \
 265         "baudrate=115200\0"                                             \
 266         "bootscript=boot.scr\0"                                         \
 267         "bootdev=/dev/mmcblk0p1\0"                                      \
 268         "rootdev=/dev/mmcblk0p2\0"                                      \
 269         "netdev=eth0\0"                                                 \
 270         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
 271         "kernel_addr_r=0x72000000\0"                                    \
 272         "addcons="                                                      \
 273                 "setenv bootargs ${bootargs} "                          \
 274                 "console=${consdev},${baudrate}\0"                      \
 275         "addip="                                                        \
 276                 "setenv bootargs ${bootargs} "                          \
 277                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 278                         "${netmask}:${hostname}:${netdev}:off\0"        \
 279         "addmisc="                                                      \
 280                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 281         "adddfltmtd="                                                   \
 282                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
 283                         "mtdparts default ; "                           \
 284                 "fi\0"                                                  \
 285         "addmtd="                                                       \
 286                 "run adddfltmtd ; "                                     \
 287                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
 288         "addargs=run addcons addmtd addmisc\0"                          \
 289         "mmcload="                                                      \
 290                 "mmc rescan ; "                                         \
 291                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
 292         "ubiload="                                                      \
 293                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
 294                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
 295         "netload="                                                      \
 296                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 297         "miscargs=nohlt panic=1\0"                                      \
 298         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 299         "ubiargs="                                                      \
 300                 "setenv bootargs ubi.mtd=5 "                            \
 301                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
 302         "nfsargs="                                                      \
 303                 "setenv bootargs root=/dev/nfs rw "                     \
 304                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 305         "mmc_mmc="                                                      \
 306                 "run mmcload mmcargs addargs ; "                        \
 307                 "bootm ${kernel_addr_r}\0"                              \
 308         "mmc_ubi="                                                      \
 309                 "run mmcload ubiargs addargs ; "                        \
 310                 "bootm ${kernel_addr_r}\0"                              \
 311         "mmc_nfs="                                                      \
 312                 "run mmcload nfsargs addip addargs ; "                  \
 313                 "bootm ${kernel_addr_r}\0"                              \
 314         "ubi_mmc="                                                      \
 315                 "run ubiload mmcargs addargs ; "                        \
 316                 "bootm ${kernel_addr_r}\0"                              \
 317         "ubi_ubi="                                                      \
 318                 "run ubiload ubiargs addargs ; "                        \
 319                 "bootm ${kernel_addr_r}\0"                              \
 320         "ubi_nfs="                                                      \
 321                 "run ubiload nfsargs addip addargs ; "                  \
 322                 "bootm ${kernel_addr_r}\0"                              \
 323         "net_mmc="                                                      \
 324                 "run netload mmcargs addargs ; "                        \
 325                 "bootm ${kernel_addr_r}\0"                              \
 326         "net_ubi="                                                      \
 327                 "run netload ubiargs addargs ; "                        \
 328                 "bootm ${kernel_addr_r}\0"                              \
 329         "net_nfs="                                                      \
 330                 "run netload nfsargs addip addargs ; "                  \
 331                 "bootm ${kernel_addr_r}\0"                              \
 332         "try_bootscript="                                               \
 333                 "mmc rescan;"                                           \
 334                 "if test -e mmc 0:1 ${bootscript} ; then "              \
 335                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
 336                 "then ; "                                               \
 337                         "echo Running bootscript... ; "                 \
 338                         "source ${kernel_addr_r} ; "                    \
 339                 "fi ; "                                                 \
 340                 "fi\0"
 341
 342 #endif  /* __M53EVK_CONFIG_H__ */