Merge branch 'master' of git://www.denx.de/git/u-boot-imx
[platform/kernel/u-boot.git] / include / configs / m53evk.h
1 /*
2  * DENX M53 configuration
3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef __M53EVK_CONFIG_H__
9 #define __M53EVK_CONFIG_H__
10
11 #define CONFIG_MX53
12 #define CONFIG_SYS_GENERIC_BOARD
13 #define CONFIG_MXC_GPIO
14
15 #include <asm/arch/imx-regs.h>
16
17 #define CONFIG_DISPLAY_CPUINFO
18 #define CONFIG_BOARD_EARLY_INIT_F
19 #define CONFIG_REVISION_TAG
20 #define CONFIG_SYS_NO_FLASH
21
22 #define CONFIG_FIT
23
24 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
25
26 /*
27  * U-Boot Commands
28  */
29 #define CONFIG_DISPLAY_BOARDINFO
30 #define CONFIG_DOS_PARTITION
31 #define CONFIG_FAT_WRITE
32
33 #define CONFIG_CMD_ASKENV
34 #define CONFIG_CMD_BMP
35 #define CONFIG_CMD_DATE
36 #define CONFIG_CMD_DHCP
37 #define CONFIG_CMD_EXT4
38 #define CONFIG_CMD_EXT4_WRITE
39 #define CONFIG_CMD_FAT
40 #define CONFIG_CMD_FS_GENERIC
41 #define CONFIG_CMD_GREPENV
42 #define CONFIG_CMD_I2C
43 #define CONFIG_CMD_MII
44 #define CONFIG_CMD_MMC
45 #define CONFIG_CMD_NAND
46 #define CONFIG_CMD_PING
47 #define CONFIG_CMD_SATA
48 #define CONFIG_CMD_USB
49 #define CONFIG_VIDEO
50
51
52 /*
53  * Memory configurations
54  */
55 #define CONFIG_NR_DRAM_BANKS            2
56 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
57 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
58 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
59 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
60 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
61 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
62 #define CONFIG_SYS_MEMTEST_START        0x70000000
63 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
64
65 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
66 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
67 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
68
69 #define CONFIG_SYS_INIT_SP_OFFSET \
70         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
71 #define CONFIG_SYS_INIT_SP_ADDR \
72         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
73
74 #define CONFIG_SYS_TEXT_BASE            0x71000000
75
76 /*
77  * U-Boot general configurations
78  */
79 #define CONFIG_SYS_LONGHELP
80 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
81 #define CONFIG_SYS_PBSIZE       \
82         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
83                                                 /* Print buffer size */
84 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
85 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
86                                                 /* Boot argument buffer size */
87 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
88 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
89 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
90 #define CONFIG_SYS_HUSH_PARSER
91
92 /*
93  * Serial Driver
94  */
95 #define CONFIG_MXC_UART
96 #define CONFIG_MXC_UART_BASE            UART2_BASE
97 #define CONFIG_CONS_INDEX               1
98 #define CONFIG_BAUDRATE                 115200
99
100 /*
101  * MMC Driver
102  */
103 #ifdef CONFIG_CMD_MMC
104 #define CONFIG_MMC
105 #define CONFIG_GENERIC_MMC
106 #define CONFIG_FSL_ESDHC
107 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
108 #define CONFIG_SYS_FSL_ESDHC_NUM        1
109 #endif
110
111 /*
112  * NAND
113  */
114 #define CONFIG_ENV_SIZE                 (16 * 1024)
115 #ifdef CONFIG_CMD_NAND
116 #define CONFIG_SYS_MAX_NAND_DEVICE      1
117 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
118 #define CONFIG_NAND_MXC
119 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
120 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
121 #define CONFIG_SYS_NAND_LARGEPAGE
122 #define CONFIG_MXC_NAND_HWECC
123 #define CONFIG_SYS_NAND_USE_FLASH_BBT
124
125 /* Environment is in NAND */
126 #define CONFIG_ENV_IS_IN_NAND
127 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
128 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
129 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
130 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
131 #define CONFIG_ENV_OFFSET_REDUND        \
132                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
133
134 #define CONFIG_CMD_UBI
135 #define CONFIG_CMD_UBIFS
136 #define CONFIG_CMD_MTDPARTS
137 #define CONFIG_RBTREE
138 #define CONFIG_LZO
139 #define CONFIG_MTD_DEVICE
140 #define CONFIG_MTD_PARTITIONS
141 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
142 #define MTDPARTS_DEFAULT                        \
143         "mtdparts=mxc_nand:"                    \
144                 "1024k(u-boot),"                \
145                 "512k(env1),"                   \
146                 "512k(env2),"                   \
147                 "14m(boot),"                    \
148                 "240m(data),"                   \
149                 "-@2048k(UBI)"
150 #else
151 #define CONFIG_ENV_IS_NOWHERE
152 #endif
153
154 /*
155  * Ethernet on SOC (FEC)
156  */
157 #ifdef CONFIG_CMD_NET
158 #define CONFIG_FEC_MXC
159 #define IMX_FEC_BASE                    FEC_BASE_ADDR
160 #define CONFIG_FEC_MXC_PHYADDR          0x0
161 #define CONFIG_MII
162 #define CONFIG_DISCOVER_PHY
163 #define CONFIG_FEC_XCV_TYPE             RMII
164 #define CONFIG_PHYLIB
165 #define CONFIG_PHY_MICREL
166 #define CONFIG_ETHPRIME                 "FEC0"
167 #endif
168
169 /*
170  * I2C
171  */
172 #ifdef CONFIG_CMD_I2C
173 #define CONFIG_SYS_I2C
174 #define CONFIG_SYS_I2C_MXC
175 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
176 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
177 #endif
178
179 /*
180  * RTC
181  */
182 #ifdef CONFIG_CMD_DATE
183 #define CONFIG_RTC_M41T62
184 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
185 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
186 #endif
187
188 /*
189  * USB
190  */
191 #ifdef CONFIG_CMD_USB
192 #define CONFIG_USB_EHCI
193 #define CONFIG_USB_EHCI_MX5
194 #define CONFIG_USB_STORAGE
195 #define CONFIG_USB_HOST_ETHER
196 #define CONFIG_USB_ETHER_ASIX
197 #define CONFIG_USB_ETHER_MCS7830
198 #define CONFIG_USB_ETHER_SMSC95XX
199 #define CONFIG_MXC_USB_PORT             1
200 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
201 #define CONFIG_MXC_USB_FLAGS            0
202 #endif
203
204 /*
205  * SATA
206  */
207 #ifdef CONFIG_CMD_SATA
208 #define CONFIG_DWC_AHSATA
209 #define CONFIG_SYS_SATA_MAX_DEVICE      1
210 #define CONFIG_DWC_AHSATA_PORT_ID       0
211 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
212 #define CONFIG_LBA48
213 #define CONFIG_LIBATA
214 #endif
215
216 /*
217  * LCD
218  */
219 #ifdef CONFIG_VIDEO
220 #define CONFIG_VIDEO_IPUV3
221 #define CONFIG_CFB_CONSOLE
222 #define CONFIG_VGA_AS_SINGLE_DEVICE
223 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
224 #define CONFIG_VIDEO_BMP_RLE8
225 #define CONFIG_VIDEO_BMP_GZIP
226 #define CONFIG_SPLASH_SCREEN
227 #define CONFIG_SPLASHIMAGE_GUARD
228 #define CONFIG_SPLASH_SCREEN_ALIGN
229 #define CONFIG_BMP_16BPP
230 #define CONFIG_VIDEO_LOGO
231 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
232 #define CONFIG_IPUV3_CLK                200000000
233 #endif
234
235 /*
236  * Boot Linux
237  */
238 #define CONFIG_CMDLINE_TAG
239 #define CONFIG_INITRD_TAG
240 #define CONFIG_REVISION_TAG
241 #define CONFIG_SETUP_MEMORY_TAGS
242 #define CONFIG_BOOTDELAY        3
243 #define CONFIG_BOOTFILE         "fitImage"
244 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
245 #define CONFIG_LOADADDR         0x70800000
246 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
247 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
248 #define CONFIG_OF_LIBFDT
249
250 /*
251  * NAND SPL
252  */
253 #define CONFIG_SPL_FRAMEWORK
254 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
255 #define CONFIG_SPL_BOARD_INIT
256 #define CONFIG_SPL_TEXT_BASE            0x70008000
257 #define CONFIG_SPL_PAD_TO               0x8000
258 #define CONFIG_SPL_STACK                0x70004000
259 #define CONFIG_SPL_GPIO_SUPPORT
260 #define CONFIG_SPL_LIBCOMMON_SUPPORT
261 #define CONFIG_SPL_LIBGENERIC_SUPPORT
262 #define CONFIG_SPL_NAND_SUPPORT
263 #define CONFIG_SPL_SERIAL_SUPPORT
264
265 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
266 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
267 #define CONFIG_SYS_NAND_OOBSIZE         64
268 #define CONFIG_SYS_NAND_PAGE_COUNT      64
269 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
270 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
271
272 /*
273  * Extra Environments
274  */
275 #define CONFIG_PREBOOT          "run try_bootscript"
276 #define CONFIG_HOSTNAME         m53evk
277
278 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
279         "consdev=ttymxc1\0"                                             \
280         "baudrate=115200\0"                                             \
281         "bootscript=boot.scr\0"                                         \
282         "bootdev=/dev/mmcblk0p1\0"                                      \
283         "rootdev=/dev/mmcblk0p2\0"                                      \
284         "netdev=eth0\0"                                                 \
285         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
286         "kernel_addr_r=0x72000000\0"                                    \
287         "addcons="                                                      \
288                 "setenv bootargs ${bootargs} "                          \
289                 "console=${consdev},${baudrate}\0"                      \
290         "addip="                                                        \
291                 "setenv bootargs ${bootargs} "                          \
292                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
293                         "${netmask}:${hostname}:${netdev}:off\0"        \
294         "addmisc="                                                      \
295                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
296         "adddfltmtd="                                                   \
297                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
298                         "mtdparts default ; "                           \
299                 "fi\0"                                                  \
300         "addmtd="                                                       \
301                 "run adddfltmtd ; "                                     \
302                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
303         "addargs=run addcons addmtd addmisc\0"                          \
304         "mmcload="                                                      \
305                 "mmc rescan ; "                                         \
306                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
307         "ubiload="                                                      \
308                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
309                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
310         "netload="                                                      \
311                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
312         "miscargs=nohlt panic=1\0"                                      \
313         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
314         "ubiargs="                                                      \
315                 "setenv bootargs ubi.mtd=5 "                            \
316                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
317         "nfsargs="                                                      \
318                 "setenv bootargs root=/dev/nfs rw "                     \
319                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
320         "mmc_mmc="                                                      \
321                 "run mmcload mmcargs addargs ; "                        \
322                 "bootm ${kernel_addr_r}\0"                              \
323         "mmc_ubi="                                                      \
324                 "run mmcload ubiargs addargs ; "                        \
325                 "bootm ${kernel_addr_r}\0"                              \
326         "mmc_nfs="                                                      \
327                 "run mmcload nfsargs addip addargs ; "                  \
328                 "bootm ${kernel_addr_r}\0"                              \
329         "ubi_mmc="                                                      \
330                 "run ubiload mmcargs addargs ; "                        \
331                 "bootm ${kernel_addr_r}\0"                              \
332         "ubi_ubi="                                                      \
333                 "run ubiload ubiargs addargs ; "                        \
334                 "bootm ${kernel_addr_r}\0"                              \
335         "ubi_nfs="                                                      \
336                 "run ubiload nfsargs addip addargs ; "                  \
337                 "bootm ${kernel_addr_r}\0"                              \
338         "net_mmc="                                                      \
339                 "run netload mmcargs addargs ; "                        \
340                 "bootm ${kernel_addr_r}\0"                              \
341         "net_ubi="                                                      \
342                 "run netload ubiargs addargs ; "                        \
343                 "bootm ${kernel_addr_r}\0"                              \
344         "net_nfs="                                                      \
345                 "run netload nfsargs addip addargs ; "                  \
346                 "bootm ${kernel_addr_r}\0"                              \
347         "try_bootscript="                                               \
348                 "mmc rescan;"                                           \
349                 "if test -e mmc 0:1 ${bootscript} ; then "              \
350                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
351                 "then ; "                                               \
352                         "echo Running bootscript... ; "                 \
353                         "source ${kernel_addr_r} ; "                    \
354                 "fi ; "                                                 \
355                 "fi\0"
356
357 #endif  /* __M53EVK_CONFIG_H__ */