include/configs/m53evk.h

   1 /*
   2  * Aries M53 configuration
   3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __M53EVK_CONFIG_H__
   9 #define __M53EVK_CONFIG_H__
  10
  11 #define CONFIG_MXC_GPIO
  12
  13 #include <asm/arch/imx-regs.h>
  14
  15 #define CONFIG_REVISION_TAG
  16 #define CONFIG_SYS_FSL_CLK
  17
  18 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  19
  20 /*
  21  * U-Boot Commands
  22  */
  23 #define CONFIG_CMD_NAND
  24 #define CONFIG_CMD_NAND_TRIMFFS
  25
  26 /*
  27  * Memory configurations
  28  */
  29 #define CONFIG_NR_DRAM_BANKS            2
  30 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
  31 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
  32 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
  33 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
  34 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  35 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  36 #define CONFIG_SYS_MEMTEST_START        0x70000000
  37 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
  38
  39 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
  40 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
  41 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
  42
  43 #define CONFIG_SYS_INIT_SP_OFFSET \
  44         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  45 #define CONFIG_SYS_INIT_SP_ADDR \
  46         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  47
  48 #define CONFIG_SYS_TEXT_BASE            0x71000000
  49
  50 /*
  51  * U-Boot general configurations
  52  */
  53 #define CONFIG_SYS_LONGHELP
  54 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  55 #define CONFIG_SYS_PBSIZE       \
  56         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  57                                                 /* Print buffer size */
  58 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  59 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  60                                                 /* Boot argument buffer size */
  61 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  62 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  63
  64 /*
  65  * Serial Driver
  66  */
  67 #define CONFIG_MXC_UART
  68 #define CONFIG_MXC_UART_BASE            UART2_BASE
  69 #define CONFIG_CONS_INDEX               1
  70
  71 /*
  72  * MMC Driver
  73  */
  74 #ifdef CONFIG_CMD_MMC
  75 #define CONFIG_FSL_ESDHC
  76 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  77 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  78 #endif
  79
  80 /*
  81  * NAND
  82  */
  83 #define CONFIG_ENV_SIZE                 (16 * 1024)
  84 #ifdef CONFIG_CMD_NAND
  85 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  86 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
  87 #define CONFIG_NAND_MXC
  88 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
  89 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
  90 #define CONFIG_SYS_NAND_LARGEPAGE
  91 #define CONFIG_MXC_NAND_HWECC
  92 #define CONFIG_SYS_NAND_USE_FLASH_BBT
  93
  94 /* Environment is in NAND */
  95 #define CONFIG_ENV_IS_IN_NAND
  96 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  97 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
  98 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
  99 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
 100 #define CONFIG_ENV_OFFSET_REDUND        \
 101                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 102
 103 #define CONFIG_CMD_UBIFS
 104 #define CONFIG_CMD_MTDPARTS
 105 #define CONFIG_RBTREE
 106 #define CONFIG_LZO
 107 #define CONFIG_MTD_DEVICE
 108 #define CONFIG_MTD_PARTITIONS
 109 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
 110 #define MTDPARTS_DEFAULT                        \
 111         "mtdparts=mxc_nand:"                    \
 112                 "1024k(u-boot),"                \
 113                 "512k(env1),"                   \
 114                 "512k(env2),"                   \
 115                 "14m(boot),"                    \
 116                 "240m(data),"                   \
 117                 "-@2048k(UBI)"
 118 #else
 119 #define CONFIG_ENV_IS_NOWHERE
 120 #endif
 121
 122 /*
 123  * Ethernet on SOC (FEC)
 124  */
 125 #ifdef CONFIG_CMD_NET
 126 #define CONFIG_FEC_MXC
 127 #define IMX_FEC_BASE                    FEC_BASE_ADDR
 128 #define CONFIG_FEC_MXC_PHYADDR          0x0
 129 #define CONFIG_MII
 130 #define CONFIG_DISCOVER_PHY
 131 #define CONFIG_FEC_XCV_TYPE             RMII
 132 #define CONFIG_PHYLIB
 133 #define CONFIG_PHY_MICREL
 134 #define CONFIG_ETHPRIME                 "FEC0"
 135 #endif
 136
 137 /*
 138  * I2C
 139  */
 140 #ifdef CONFIG_CMD_I2C
 141 #define CONFIG_SYS_I2C
 142 #define CONFIG_SYS_I2C_MXC
 143 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 144 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 145 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 146 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
 147 #endif
 148
 149 /*
 150  * RTC
 151  */
 152 #ifdef CONFIG_CMD_DATE
 153 #define CONFIG_RTC_M41T62
 154 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 155 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 156 #endif
 157
 158 /*
 159  * USB
 160  */
 161 #ifdef CONFIG_CMD_USB
 162 #define CONFIG_USB_EHCI_MX5
 163 #define CONFIG_USB_HOST_ETHER
 164 #define CONFIG_USB_ETHER_ASIX
 165 #define CONFIG_USB_ETHER_MCS7830
 166 #define CONFIG_USB_ETHER_SMSC95XX
 167 #define CONFIG_MXC_USB_PORT             1
 168 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 169 #define CONFIG_MXC_USB_FLAGS            0
 170 #endif
 171
 172 /*
 173  * SATA
 174  */
 175 #ifdef CONFIG_CMD_SATA
 176 #define CONFIG_DWC_AHSATA
 177 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 178 #define CONFIG_DWC_AHSATA_PORT_ID       0
 179 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 180 #define CONFIG_LBA48
 181 #define CONFIG_LIBATA
 182 #endif
 183
 184 /*
 185  * LCD
 186  */
 187 #ifdef CONFIG_VIDEO
 188 #define CONFIG_VIDEO_IPUV3
 189 #define CONFIG_VIDEO_BMP_RLE8
 190 #define CONFIG_VIDEO_BMP_GZIP
 191 #define CONFIG_SPLASH_SCREEN
 192 #define CONFIG_SPLASHIMAGE_GUARD
 193 #define CONFIG_SPLASH_SCREEN_ALIGN
 194 #define CONFIG_BMP_16BPP
 195 #define CONFIG_VIDEO_LOGO
 196 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
 197 #define CONFIG_IPUV3_CLK                200000000
 198 #endif
 199
 200 /*
 201  * Boot Linux
 202  */
 203 #define CONFIG_CMDLINE_TAG
 204 #define CONFIG_INITRD_TAG
 205 #define CONFIG_REVISION_TAG
 206 #define CONFIG_SETUP_MEMORY_TAGS
 207 #define CONFIG_BOOTFILE         "fitImage"
 208 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
 209 #define CONFIG_LOADADDR         0x70800000
 210 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 211 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 212
 213 /*
 214  * NAND SPL
 215  */
 216 #define CONFIG_SPL_FRAMEWORK
 217 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
 218 #define CONFIG_SPL_TEXT_BASE            0x70008000
 219 #define CONFIG_SPL_PAD_TO               0x8000
 220 #define CONFIG_SPL_STACK                0x70004000
 221
 222 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 223 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 224 #define CONFIG_SYS_NAND_OOBSIZE         64
 225 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 226 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 227 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 228
 229 /*
 230  * Extra Environments
 231  */
 232 #define CONFIG_PREBOOT          "run try_bootscript"
 233 #define CONFIG_HOSTNAME         m53evk
 234
 235 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 236         "consdev=ttymxc1\0"                                             \
 237         "baudrate=115200\0"                                             \
 238         "bootscript=boot.scr\0"                                         \
 239         "bootdev=/dev/mmcblk0p1\0"                                      \
 240         "rootdev=/dev/mmcblk0p2\0"                                      \
 241         "netdev=eth0\0"                                                 \
 242         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
 243         "kernel_addr_r=0x72000000\0"                                    \
 244         "addcons="                                                      \
 245                 "setenv bootargs ${bootargs} "                          \
 246                 "console=${consdev},${baudrate}\0"                      \
 247         "addip="                                                        \
 248                 "setenv bootargs ${bootargs} "                          \
 249                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 250                         "${netmask}:${hostname}:${netdev}:off\0"        \
 251         "addmisc="                                                      \
 252                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 253         "adddfltmtd="                                                   \
 254                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
 255                         "mtdparts default ; "                           \
 256                 "fi\0"                                                  \
 257         "addmtd="                                                       \
 258                 "run adddfltmtd ; "                                     \
 259                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
 260         "addargs=run addcons addmtd addmisc\0"                          \
 261         "mmcload="                                                      \
 262                 "mmc rescan ; "                                         \
 263                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
 264         "ubiload="                                                      \
 265                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
 266                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
 267         "netload="                                                      \
 268                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 269         "miscargs=nohlt panic=1\0"                                      \
 270         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 271         "ubiargs="                                                      \
 272                 "setenv bootargs ubi.mtd=5 "                            \
 273                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
 274         "nfsargs="                                                      \
 275                 "setenv bootargs root=/dev/nfs rw "                     \
 276                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 277         "mmc_mmc="                                                      \
 278                 "run mmcload mmcargs addargs ; "                        \
 279                 "bootm ${kernel_addr_r}\0"                              \
 280         "mmc_ubi="                                                      \
 281                 "run mmcload ubiargs addargs ; "                        \
 282                 "bootm ${kernel_addr_r}\0"                              \
 283         "mmc_nfs="                                                      \
 284                 "run mmcload nfsargs addip addargs ; "                  \
 285                 "bootm ${kernel_addr_r}\0"                              \
 286         "ubi_mmc="                                                      \
 287                 "run ubiload mmcargs addargs ; "                        \
 288                 "bootm ${kernel_addr_r}\0"                              \
 289         "ubi_ubi="                                                      \
 290                 "run ubiload ubiargs addargs ; "                        \
 291                 "bootm ${kernel_addr_r}\0"                              \
 292         "ubi_nfs="                                                      \
 293                 "run ubiload nfsargs addip addargs ; "                  \
 294                 "bootm ${kernel_addr_r}\0"                              \
 295         "net_mmc="                                                      \
 296                 "run netload mmcargs addargs ; "                        \
 297                 "bootm ${kernel_addr_r}\0"                              \
 298         "net_ubi="                                                      \
 299                 "run netload ubiargs addargs ; "                        \
 300                 "bootm ${kernel_addr_r}\0"                              \
 301         "net_nfs="                                                      \
 302                 "run netload nfsargs addip addargs ; "                  \
 303                 "bootm ${kernel_addr_r}\0"                              \
 304         "try_bootscript="                                               \
 305                 "mmc rescan;"                                           \
 306                 "if test -e mmc 0:1 ${bootscript} ; then "              \
 307                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
 308                 "then ; "                                               \
 309                         "echo Running bootscript... ; "                 \
 310                         "source ${kernel_addr_r} ; "                    \
 311                 "fi ; "                                                 \
 312                 "fi\0"
 313
 314 #endif  /* __M53EVK_CONFIG_H__ */