include/configs/m53evk.h

   1 /*
   2  * Aries M53 configuration
   3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __M53EVK_CONFIG_H__
   9 #define __M53EVK_CONFIG_H__
  10
  11 #define CONFIG_MXC_GPIO
  12
  13 #include <asm/arch/imx-regs.h>
  14
  15 #define CONFIG_REVISION_TAG
  16 #define CONFIG_SYS_FSL_CLK
  17
  18 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  19
  20 /*
  21  * U-Boot Commands
  22  */
  23 #define CONFIG_FAT_WRITE
  24
  25 #define CONFIG_CMD_NAND
  26 #define CONFIG_CMD_NAND_TRIMFFS
  27 #define CONFIG_CMD_SATA
  28
  29 /*
  30  * Memory configurations
  31  */
  32 #define CONFIG_NR_DRAM_BANKS            2
  33 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
  34 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
  35 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
  36 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
  37 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  38 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  39 #define CONFIG_SYS_MEMTEST_START        0x70000000
  40 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
  41
  42 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
  43 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
  44 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
  45
  46 #define CONFIG_SYS_INIT_SP_OFFSET \
  47         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  48 #define CONFIG_SYS_INIT_SP_ADDR \
  49         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  50
  51 #define CONFIG_SYS_TEXT_BASE            0x71000000
  52
  53 /*
  54  * U-Boot general configurations
  55  */
  56 #define CONFIG_SYS_LONGHELP
  57 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  58 #define CONFIG_SYS_PBSIZE       \
  59         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  60                                                 /* Print buffer size */
  61 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  62 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  63                                                 /* Boot argument buffer size */
  64 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  65 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  66
  67 /*
  68  * Serial Driver
  69  */
  70 #define CONFIG_MXC_UART
  71 #define CONFIG_MXC_UART_BASE            UART2_BASE
  72 #define CONFIG_CONS_INDEX               1
  73
  74 /*
  75  * MMC Driver
  76  */
  77 #ifdef CONFIG_CMD_MMC
  78 #define CONFIG_FSL_ESDHC
  79 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  80 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  81 #endif
  82
  83 /*
  84  * NAND
  85  */
  86 #define CONFIG_ENV_SIZE                 (16 * 1024)
  87 #ifdef CONFIG_CMD_NAND
  88 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  89 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
  90 #define CONFIG_NAND_MXC
  91 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
  92 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
  93 #define CONFIG_SYS_NAND_LARGEPAGE
  94 #define CONFIG_MXC_NAND_HWECC
  95 #define CONFIG_SYS_NAND_USE_FLASH_BBT
  96
  97 /* Environment is in NAND */
  98 #define CONFIG_ENV_IS_IN_NAND
  99 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 100 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 101 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
 102 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
 103 #define CONFIG_ENV_OFFSET_REDUND        \
 104                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 105
 106 #define CONFIG_CMD_UBIFS
 107 #define CONFIG_CMD_MTDPARTS
 108 #define CONFIG_RBTREE
 109 #define CONFIG_LZO
 110 #define CONFIG_MTD_DEVICE
 111 #define CONFIG_MTD_PARTITIONS
 112 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
 113 #define MTDPARTS_DEFAULT                        \
 114         "mtdparts=mxc_nand:"                    \
 115                 "1024k(u-boot),"                \
 116                 "512k(env1),"                   \
 117                 "512k(env2),"                   \
 118                 "14m(boot),"                    \
 119                 "240m(data),"                   \
 120                 "-@2048k(UBI)"
 121 #else
 122 #define CONFIG_ENV_IS_NOWHERE
 123 #endif
 124
 125 /*
 126  * Ethernet on SOC (FEC)
 127  */
 128 #ifdef CONFIG_CMD_NET
 129 #define CONFIG_FEC_MXC
 130 #define IMX_FEC_BASE                    FEC_BASE_ADDR
 131 #define CONFIG_FEC_MXC_PHYADDR          0x0
 132 #define CONFIG_MII
 133 #define CONFIG_DISCOVER_PHY
 134 #define CONFIG_FEC_XCV_TYPE             RMII
 135 #define CONFIG_PHYLIB
 136 #define CONFIG_PHY_MICREL
 137 #define CONFIG_ETHPRIME                 "FEC0"
 138 #endif
 139
 140 /*
 141  * I2C
 142  */
 143 #ifdef CONFIG_CMD_I2C
 144 #define CONFIG_SYS_I2C
 145 #define CONFIG_SYS_I2C_MXC
 146 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 147 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 148 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 149 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
 150 #endif
 151
 152 /*
 153  * RTC
 154  */
 155 #ifdef CONFIG_CMD_DATE
 156 #define CONFIG_RTC_M41T62
 157 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 158 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 159 #endif
 160
 161 /*
 162  * USB
 163  */
 164 #ifdef CONFIG_CMD_USB
 165 #define CONFIG_USB_EHCI
 166 #define CONFIG_USB_EHCI_MX5
 167 #define CONFIG_USB_HOST_ETHER
 168 #define CONFIG_USB_ETHER_ASIX
 169 #define CONFIG_USB_ETHER_MCS7830
 170 #define CONFIG_USB_ETHER_SMSC95XX
 171 #define CONFIG_MXC_USB_PORT             1
 172 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 173 #define CONFIG_MXC_USB_FLAGS            0
 174 #endif
 175
 176 /*
 177  * SATA
 178  */
 179 #ifdef CONFIG_CMD_SATA
 180 #define CONFIG_DWC_AHSATA
 181 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 182 #define CONFIG_DWC_AHSATA_PORT_ID       0
 183 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 184 #define CONFIG_LBA48
 185 #define CONFIG_LIBATA
 186 #endif
 187
 188 /*
 189  * LCD
 190  */
 191 #ifdef CONFIG_VIDEO
 192 #define CONFIG_VIDEO_IPUV3
 193 #define CONFIG_VIDEO_BMP_RLE8
 194 #define CONFIG_VIDEO_BMP_GZIP
 195 #define CONFIG_SPLASH_SCREEN
 196 #define CONFIG_SPLASHIMAGE_GUARD
 197 #define CONFIG_SPLASH_SCREEN_ALIGN
 198 #define CONFIG_BMP_16BPP
 199 #define CONFIG_VIDEO_LOGO
 200 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
 201 #define CONFIG_IPUV3_CLK                200000000
 202 #endif
 203
 204 /*
 205  * Boot Linux
 206  */
 207 #define CONFIG_CMDLINE_TAG
 208 #define CONFIG_INITRD_TAG
 209 #define CONFIG_REVISION_TAG
 210 #define CONFIG_SETUP_MEMORY_TAGS
 211 #define CONFIG_BOOTFILE         "fitImage"
 212 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
 213 #define CONFIG_LOADADDR         0x70800000
 214 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 215 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 216
 217 /*
 218  * NAND SPL
 219  */
 220 #define CONFIG_SPL_FRAMEWORK
 221 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
 222 #define CONFIG_SPL_BOARD_INIT
 223 #define CONFIG_SPL_TEXT_BASE            0x70008000
 224 #define CONFIG_SPL_PAD_TO               0x8000
 225 #define CONFIG_SPL_STACK                0x70004000
 226
 227 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 228 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 229 #define CONFIG_SYS_NAND_OOBSIZE         64
 230 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 231 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 232 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 233
 234 /*
 235  * Extra Environments
 236  */
 237 #define CONFIG_PREBOOT          "run try_bootscript"
 238 #define CONFIG_HOSTNAME         m53evk
 239
 240 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 241         "consdev=ttymxc1\0"                                             \
 242         "baudrate=115200\0"                                             \
 243         "bootscript=boot.scr\0"                                         \
 244         "bootdev=/dev/mmcblk0p1\0"                                      \
 245         "rootdev=/dev/mmcblk0p2\0"                                      \
 246         "netdev=eth0\0"                                                 \
 247         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
 248         "kernel_addr_r=0x72000000\0"                                    \
 249         "addcons="                                                      \
 250                 "setenv bootargs ${bootargs} "                          \
 251                 "console=${consdev},${baudrate}\0"                      \
 252         "addip="                                                        \
 253                 "setenv bootargs ${bootargs} "                          \
 254                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 255                         "${netmask}:${hostname}:${netdev}:off\0"        \
 256         "addmisc="                                                      \
 257                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 258         "adddfltmtd="                                                   \
 259                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
 260                         "mtdparts default ; "                           \
 261                 "fi\0"                                                  \
 262         "addmtd="                                                       \
 263                 "run adddfltmtd ; "                                     \
 264                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
 265         "addargs=run addcons addmtd addmisc\0"                          \
 266         "mmcload="                                                      \
 267                 "mmc rescan ; "                                         \
 268                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
 269         "ubiload="                                                      \
 270                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
 271                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
 272         "netload="                                                      \
 273                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 274         "miscargs=nohlt panic=1\0"                                      \
 275         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 276         "ubiargs="                                                      \
 277                 "setenv bootargs ubi.mtd=5 "                            \
 278                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
 279         "nfsargs="                                                      \
 280                 "setenv bootargs root=/dev/nfs rw "                     \
 281                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 282         "mmc_mmc="                                                      \
 283                 "run mmcload mmcargs addargs ; "                        \
 284                 "bootm ${kernel_addr_r}\0"                              \
 285         "mmc_ubi="                                                      \
 286                 "run mmcload ubiargs addargs ; "                        \
 287                 "bootm ${kernel_addr_r}\0"                              \
 288         "mmc_nfs="                                                      \
 289                 "run mmcload nfsargs addip addargs ; "                  \
 290                 "bootm ${kernel_addr_r}\0"                              \
 291         "ubi_mmc="                                                      \
 292                 "run ubiload mmcargs addargs ; "                        \
 293                 "bootm ${kernel_addr_r}\0"                              \
 294         "ubi_ubi="                                                      \
 295                 "run ubiload ubiargs addargs ; "                        \
 296                 "bootm ${kernel_addr_r}\0"                              \
 297         "ubi_nfs="                                                      \
 298                 "run ubiload nfsargs addip addargs ; "                  \
 299                 "bootm ${kernel_addr_r}\0"                              \
 300         "net_mmc="                                                      \
 301                 "run netload mmcargs addargs ; "                        \
 302                 "bootm ${kernel_addr_r}\0"                              \
 303         "net_ubi="                                                      \
 304                 "run netload ubiargs addargs ; "                        \
 305                 "bootm ${kernel_addr_r}\0"                              \
 306         "net_nfs="                                                      \
 307                 "run netload nfsargs addip addargs ; "                  \
 308                 "bootm ${kernel_addr_r}\0"                              \
 309         "try_bootscript="                                               \
 310                 "mmc rescan;"                                           \
 311                 "if test -e mmc 0:1 ${bootscript} ; then "              \
 312                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
 313                 "then ; "                                               \
 314                         "echo Running bootscript... ; "                 \
 315                         "source ${kernel_addr_r} ; "                    \
 316                 "fi ; "                                                 \
 317                 "fi\0"
 318
 319 #endif  /* __M53EVK_CONFIG_H__ */