include/configs/lx2162aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2020 NXP
   4  */
   5
   6 #ifndef __LX2162_QDS_H
   7 #define __LX2162_QDS_H
   8
   9 #include "lx2160a_common.h"
  10
  11 /* USB */
  12 #undef CONFIG_USB_MAX_CONTROLLER_COUNT
  13 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  14
  15 /* Voltage monitor on channel 2*/
  16 #define CONFIG_VID_FLS_ENV              "lx2162aqds_vdd_mv"
  17 #define CONFIG_VID
  18 #define CONFIG_VOL_MONITOR_LTC3882_SET
  19 #define CONFIG_VOL_MONITOR_LTC3882_READ
  20
  21 /* RTC */
  22 #define CONFIG_SYS_RTC_BUS_NUM          0
  23
  24 /*
  25  * MMC
  26  */
  27 #ifdef CONFIG_MMC
  28 #ifndef __ASSEMBLY__
  29 u8 qixis_esdhc_detect_quirk(void);
  30 #endif
  31 #define CONFIG_ESDHC_DETECT_QUIRK  qixis_esdhc_detect_quirk()
  32 #endif
  33
  34 /* MAC/PHY configuration */
  35 #if defined(CONFIG_FSL_MC_ENET)
  36 #define CONFIG_MII
  37 #define CONFIG_ETHPRIME         "DPMAC17@rgmii-id"
  38 #endif
  39
  40 /* EEPROM */
  41 #define CONFIG_ID_EEPROM
  42 #define CONFIG_SYS_I2C_EEPROM_NXID
  43 #define CONFIG_SYS_EEPROM_BUS_NUM               0
  44 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
  45 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
  46 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
  47 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
  48
  49 /* Initial environment variables */
  50 #define CONFIG_EXTRA_ENV_SETTINGS               \
  51         EXTRA_ENV_SETTINGS                      \
  52         "boot_scripts=lx2162aqds_boot.scr\0"    \
  53         "boot_script_hdr=hdr_lx2162aqds_bs.out\0"       \
  54         "BOARD=lx2162aqds\0"                    \
  55         "xspi_bootcmd=echo Trying load from flexspi..;"         \
  56                 "sf probe 0:0 && sf read $load_addr "           \
  57                 "$kernel_start $kernel_size ; env exists secureboot &&" \
  58                 "sf read $kernelheader_addr_r $kernelheader_start "     \
  59                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
  60                 " bootm $load_addr#$BOARD\0"                    \
  61         "sd_bootcmd=echo Trying load from sd card..;"           \
  62                 "mmc dev 0; mmcinfo; mmc read $load_addr "                      \
  63                 "$kernel_addr_sd $kernel_size_sd ;"             \
  64                 "env exists secureboot && mmc read $kernelheader_addr_r "\
  65                 "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
  66                 " && esbc_validate ${kernelheader_addr_r};"     \
  67                 "bootm $load_addr#$BOARD\0"                     \
  68         "emmc_bootcmd=echo Trying load from emmc card..;"       \
  69                 "mmc dev 1; mmcinfo; mmc read $load_addr "      \
  70                 "$kernel_addr_sd $kernel_size_sd ;"             \
  71                 "env exists secureboot && mmc read $kernelheader_addr_r "\
  72                 "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
  73                 " && esbc_validate ${kernelheader_addr_r};"     \
  74                 "bootm $load_addr#$BOARD\0"
  75
  76 #include <asm/fsl_secure_boot.h>
  77
  78 #endif /* __LX2162_QDS_H */