include/configs/lx2160ardb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018,2020 NXP
   4  */
   5
   6 #ifndef __LX2_RDB_H
   7 #define __LX2_RDB_H
   8
   9 #include "lx2160a_common.h"
  10
  11 /* VID */
  12 #define CONFIG_VID_FLS_ENV              "lx2160ardb_vdd_mv"
  13 #define CONFIG_VID
  14 #define CONFIG_VOL_MONITOR_LTC3882_SET
  15 #define CONFIG_VOL_MONITOR_LTC3882_READ
  16
  17 /* RTC */
  18 #define CONFIG_SYS_RTC_BUS_NUM          4
  19
  20 /* MAC/PHY configuration */
  21 #if defined(CONFIG_FSL_MC_ENET)
  22 #define CONFIG_MII
  23 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
  24 #endif
  25
  26 /* EMC2305 */
  27 #define I2C_MUX_CH_EMC2305              0x09
  28 #define I2C_EMC2305_ADDR                0x4D
  29 #define I2C_EMC2305_CMD         0x40
  30 #define I2C_EMC2305_PWM         0x80
  31
  32 /* EEPROM */
  33 #define CONFIG_ID_EEPROM
  34 #define CONFIG_SYS_I2C_EEPROM_NXID
  35 #define CONFIG_SYS_EEPROM_BUS_NUM                  0
  36 #define CONFIG_SYS_I2C_EEPROM_ADDR                 0x57
  37 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN      1
  38 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
  39 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
  40
  41 /* Initial environment variables */
  42 #define CONFIG_EXTRA_ENV_SETTINGS               \
  43         EXTRA_ENV_SETTINGS                      \
  44         "boot_scripts=lx2160ardb_boot.scr\0"    \
  45         "boot_script_hdr=hdr_lx2160ardb_bs.out\0"       \
  46         "BOARD=lx2160ardb\0"                    \
  47         "xspi_bootcmd=echo Trying load from flexspi..;"         \
  48                 "sf probe 0:0 && sf read $load_addr "           \
  49                 "$kernel_start $kernel_size ; env exists secureboot &&" \
  50                 "sf read $kernelheader_addr_r $kernelheader_start "     \
  51                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
  52                 " bootm $load_addr#$BOARD\0"                    \
  53         "sd_bootcmd=echo Trying load from sd card..;"           \
  54                 "mmc dev 0; mmcinfo; mmc read $load_addr "                      \
  55                 "$kernel_addr_sd $kernel_size_sd ;"             \
  56                 "env exists secureboot && mmc read $kernelheader_addr_r "\
  57                 "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
  58                 " && esbc_validate ${kernelheader_addr_r};"     \
  59                 "bootm $load_addr#$BOARD\0"                     \
  60         "sd2_bootcmd=echo Trying load from emmc card..;"        \
  61                 "mmc dev 1; mmcinfo; mmc read $load_addr "      \
  62                 "$kernel_addr_sd $kernel_size_sd ;"             \
  63                 "env exists secureboot && mmc read $kernelheader_addr_r "\
  64                 "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
  65                 " && esbc_validate ${kernelheader_addr_r};"     \
  66                 "bootm $load_addr#$BOARD\0"
  67
  68 #include <asm/fsl_secure_boot.h>
  69
  70 #endif /* __LX2_RDB_H */