include/configs/lx2160aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018-2020 NXP
   4  */
   5
   6 #ifndef __LX2_QDS_H
   7 #define __LX2_QDS_H
   8
   9 #include "lx2160a_common.h"
  10
  11 /* VID */
  12 #define CONFIG_VID_FLS_ENV              "lx2160aqds_vdd_mv"
  13 #define CONFIG_VID
  14 #define CONFIG_VOL_MONITOR_LTC3882_SET
  15 #define CONFIG_VOL_MONITOR_LTC3882_READ
  16
  17 /* RTC */
  18 #define CONFIG_SYS_RTC_BUS_NUM          0
  19
  20 /*
  21  * MMC
  22  */
  23 #ifdef CONFIG_MMC
  24 #ifndef __ASSEMBLY__
  25 u8 qixis_esdhc_detect_quirk(void);
  26 #endif
  27 #define CONFIG_ESDHC_DETECT_QUIRK  qixis_esdhc_detect_quirk()
  28 #endif
  29
  30 /* MAC/PHY configuration */
  31 #if defined(CONFIG_FSL_MC_ENET)
  32 #define CONFIG_MII
  33 #define CONFIG_ETHPRIME         "DPMAC17@rgmii-id"
  34 #endif
  35
  36 /* EEPROM */
  37 #define CONFIG_ID_EEPROM
  38 #define CONFIG_SYS_I2C_EEPROM_NXID
  39 #define CONFIG_SYS_EEPROM_BUS_NUM               0
  40 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
  41 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
  42 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
  43 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
  44
  45 /* Initial environment variables */
  46 #define CONFIG_EXTRA_ENV_SETTINGS               \
  47         EXTRA_ENV_SETTINGS                      \
  48         "boot_scripts=lx2160aqds_boot.scr\0"    \
  49         "boot_script_hdr=hdr_lx2160aqds_bs.out\0"       \
  50         "BOARD=lx2160aqds\0"                    \
  51         "xspi_bootcmd=echo Trying load from flexspi..;"         \
  52                 "sf probe 0:0 && sf read $load_addr "           \
  53                 "$kernel_start $kernel_size ; env exists secureboot &&" \
  54                 "sf read $kernelheader_addr_r $kernelheader_start "     \
  55                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
  56                 " bootm $load_addr#$BOARD\0"                    \
  57         "sd_bootcmd=echo Trying load from sd card..;"           \
  58                 "mmc dev 0; mmcinfo; mmc read $load_addr "                      \
  59                 "$kernel_addr_sd $kernel_size_sd ;"             \
  60                 "env exists secureboot && mmc read $kernelheader_addr_r "\
  61                 "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
  62                 " && esbc_validate ${kernelheader_addr_r};"     \
  63                 "bootm $load_addr#$BOARD\0"                     \
  64         "sd2_bootcmd=echo Trying load from emmc card..;"        \
  65                 "mmc dev 1; mmcinfo; mmc read $load_addr "      \
  66                 "$kernel_addr_sd $kernel_size_sd ;"             \
  67                 "env exists secureboot && mmc read $kernelheader_addr_r "\
  68                 "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
  69                 " && esbc_validate ${kernelheader_addr_r};"     \
  70                 "bootm $load_addr#$BOARD\0"
  71
  72 #include <asm/fsl_secure_boot.h>
  73
  74 #endif /* __LX2_QDS_H */