include/configs/lx2160aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018-2019 NXP
   4  */
   5
   6 #ifndef __LX2_QDS_H
   7 #define __LX2_QDS_H
   8
   9 #include "lx2160a_common.h"
  10
  11 /* Qixis */
  12 #define QIXIS_XMAP_MASK                 0x07
  13 #define QIXIS_XMAP_SHIFT                5
  14 #define QIXIS_RST_CTL_RESET_EN          0x30
  15 #define QIXIS_LBMAP_DFLTBANK            0x00
  16 #define QIXIS_LBMAP_ALTBANK             0x20
  17 #define QIXIS_LBMAP_QSPI                0x00
  18 #define QIXIS_RCW_SRC_QSPI              0xff
  19 #define QIXIS_RST_CTL_RESET             0x31
  20 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
  21 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
  22 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
  23 #define QIXIS_LBMAP_MASK                0x0f
  24 #define QIXIS_LBMAP_SD
  25 #define QIXIS_RCW_SRC_SD                0x08
  26 #define NON_EXTENDED_DUTCFG
  27 #define QIXIS_SDID_MASK                 0x07
  28 #define QIXIS_ESDHC_NO_ADAPTER          0x7
  29
  30 /* SYSCLK */
  31 #define QIXIS_SYSCLK_100                0x0
  32 #define QIXIS_SYSCLK_125                0x1
  33 #define QIXIS_SYSCLK_133                0x2
  34
  35 /* DDRCLK */
  36 #define QIXIS_DDRCLK_100                0x0
  37 #define QIXIS_DDRCLK_125                0x1
  38 #define QIXIS_DDRCLK_133                0x2
  39
  40 #define BRDCFG4_EMI1SEL_MASK            0xF8
  41 #define BRDCFG4_EMI1SEL_SHIFT           3
  42 #define BRDCFG4_EMI2SEL_MASK            0x07
  43 #define BRDCFG4_EMI2SEL_SHIFT           0
  44
  45 /* VID */
  46
  47 #define I2C_MUX_CH_VOL_MONITOR          0xA
  48 /* Voltage monitor on channel 2*/
  49 #define I2C_VOL_MONITOR_ADDR            0x63
  50 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
  51 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
  52 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
  53 #define CONFIG_VID_FLS_ENV              "lx2160aqds_vdd_mv"
  54 #define CONFIG_VID
  55
  56 /* The lowest and highest voltage allowed*/
  57 #define VDD_MV_MIN                      775
  58 #define VDD_MV_MAX                      925
  59
  60 /* PM Bus commands code for LTC3882*/
  61 #define PMBUS_CMD_PAGE                  0x0
  62 #define PMBUS_CMD_READ_VOUT             0x8B
  63 #define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
  64 #define PMBUS_CMD_VOUT_COMMAND          0x21
  65 #define PWM_CHANNEL0                    0x0
  66
  67 #define CONFIG_VOL_MONITOR_LTC3882_SET
  68 #define CONFIG_VOL_MONITOR_LTC3882_READ
  69
  70 /* RTC */
  71 #define CONFIG_SYS_RTC_BUS_NUM          0
  72 #define I2C_MUX_CH_RTC                  0xB
  73
  74 /*
  75  * MMC
  76  */
  77 #ifdef CONFIG_MMC
  78 #ifndef __ASSEMBLY__
  79 u8 qixis_esdhc_detect_quirk(void);
  80 #endif
  81 #define CONFIG_ESDHC_DETECT_QUIRK  qixis_esdhc_detect_quirk()
  82 #endif
  83
  84 /* MAC/PHY configuration */
  85 #if defined(CONFIG_FSL_MC_ENET)
  86 #define CONFIG_MII
  87 #define CONFIG_ETHPRIME         "DPMAC17@rgmii-id"
  88
  89 #define AQ_PHY_ADDR1            0x00
  90 #define AQ_PHY_ADDR2            0x01
  91 #define AQ_PHY_ADDR3            0x02
  92 #define AQ_PHY_ADDR4            0x03
  93
  94 #define CORTINA_NO_FW_UPLOAD
  95 #define CORTINA_PHY_ADDR1       0x0
  96
  97 #define INPHI_PHY_ADDR1         0x0
  98 #define INPHI_PHY_ADDR2         0x1
  99
 100 #define RGMII_PHY_ADDR1         0x01
 101 #define RGMII_PHY_ADDR2         0x02
 102
 103 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 104 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 105 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 106 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 107
 108 #endif
 109
 110 /* EEPROM */
 111 #define CONFIG_ID_EEPROM
 112 #define CONFIG_SYS_I2C_EEPROM_NXID
 113 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 114 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 115 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 116 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 117 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 118
 119 /* Initial environment variables */
 120 #define CONFIG_EXTRA_ENV_SETTINGS               \
 121         EXTRA_ENV_SETTINGS                      \
 122         "lx2160aqds_vdd_mv=800\0"               \
 123         "BOARD=lx2160aqds\0"                    \
 124         "xspi_bootcmd=echo Trying load from flexspi..;"         \
 125                 "sf probe 0:0 && sf read $load_addr "           \
 126                 "$kernel_start $kernel_size ; env exists secureboot &&" \
 127                 "sf read $kernelheader_addr_r $kernelheader_start "     \
 128                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 129                 " bootm $load_addr#$BOARD\0"                    \
 130         "sd_bootcmd=echo Trying load from sd card..;"           \
 131                 "mmcinfo; mmc read $load_addr "                 \
 132                 "$kernel_addr_sd $kernel_size_sd ;"             \
 133                 "env exists secureboot && mmc read $kernelheader_addr_r "\
 134                 "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
 135                 " && esbc_validate ${kernelheader_addr_r};"     \
 136                 "bootm $load_addr#$BOARD\0"
 137
 138 #include <asm/fsl_secure_boot.h>
 139
 140 #endif /* __LX2_QDS_H */