3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 /************************************************************************
22 * lwmon5.h - configuration for lwmon5 board
23 ***********************************************************************/
27 /*-----------------------------------------------------------------------
28 * High Level Configuration Options
29 *----------------------------------------------------------------------*/
30 #define CONFIG_LWMON5 1 /* Board is lwmon5 */
31 #define CONFIG_440EPX 1 /* Specific PPC440EPx */
32 #define CONFIG_440 1 /* ... PPC440 family */
33 #define CONFIG_4xx 1 /* ... PPC4xx family */
34 #define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */
36 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
37 #define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */
38 #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
39 #define CONFIG_BOARD_RESET 1 /* Call board_reset */
41 /*-----------------------------------------------------------------------
42 * Base addresses -- Note these are effective addresses where the
43 * actual resources get mapped (not physical addresses)
44 *----------------------------------------------------------------------*/
45 #define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
46 #define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */
48 #define CFG_BOOT_BASE_ADDR 0xf0000000
49 #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
50 #define CFG_FLASH_BASE 0xf8000000 /* start of FLASH */
51 #define CFG_MONITOR_BASE TEXT_BASE
52 #define CFG_LIME_BASE_0 0xc0000000
53 #define CFG_LIME_BASE_1 0xc1000000
54 #define CFG_LIME_BASE_2 0xc2000000
55 #define CFG_LIME_BASE_3 0xc3000000
56 #define CFG_FPGA_BASE_0 0xc4000000
57 #define CFG_FPGA_BASE_1 0xc4200000
58 #define CFG_OCM_BASE 0xe0010000 /* ocm */
59 #define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
60 #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
61 #define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
62 #define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
63 #define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
65 /* Don't change either of these */
66 #define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
68 #define CFG_USB2D0_BASE 0xe0000100
69 #define CFG_USB_DEVICE 0xe0000000
70 #define CFG_USB_HOST 0xe0000400
72 /*-----------------------------------------------------------------------
73 * Initial RAM & stack pointer
74 *----------------------------------------------------------------------*/
76 * On LWMON5 we use D-cache as init-ram and stack pointer. We also move
77 * the POST_WORD from OCM to a 440EPx register that preserves it's
78 * content during reset (GPT0_COM6). This way we reserve the OCM (16k)
81 #define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
82 #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
83 #define CFG_INIT_RAM_END (4 << 10)
84 #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
85 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
86 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
87 #define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6)
88 /* unused GPT0 COMP reg */
90 /* Additional registers for watchdog timer post test */
92 #define CFG_DSPIC_TEST_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP5)
93 #define CFG_WATCHDOG_TIME_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP4)
94 #define CFG_WATCHDOG_FLAGS_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP5)
95 #define CFG_WATCHDOG_MAGIC 0x12480000
96 #define CFG_WATCHDOG_MAGIC_MASK 0xFFFF0000
97 #define CFG_DSPIC_TEST_MASK 0x00000001
99 /*-----------------------------------------------------------------------
101 *----------------------------------------------------------------------*/
102 #undef CFG_EXT_SERIAL_CLOCK /* no external clock provided */
103 #define CONFIG_BAUDRATE 115200
104 #define CONFIG_SERIAL_MULTI 1
105 /* define this if you want console on UART1 */
106 #define CONFIG_UART1_CONSOLE 1 /* use UART1 as console */
108 #define CFG_BAUDRATE_TABLE \
109 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
111 /*-----------------------------------------------------------------------
113 *----------------------------------------------------------------------*/
114 #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
116 /*-----------------------------------------------------------------------
118 *----------------------------------------------------------------------*/
119 #define CFG_FLASH_CFI /* The flash is CFI compatible */
120 #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
122 #define CFG_FLASH0 0xFC000000
123 #define CFG_FLASH1 0xF8000000
124 #define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 }
126 #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
127 #define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
129 #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
130 #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
132 #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
133 #define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
135 #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
136 #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
138 #define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
139 #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
140 #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
142 /* Address and size of Redundant Environment Sector */
143 #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
144 #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
146 /*-----------------------------------------------------------------------
148 *----------------------------------------------------------------------*/
149 #define CFG_MBYTES_SDRAM (256) /* 256MB */
150 #define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */
151 #define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */
152 #if 0 /* test-only: disable ECC for now */
153 #define CONFIG_DDR_ECC 1 /* enable ECC */
154 #define CFG_POST_ECC_ON CFG_POST_ECC
156 #define CFG_POST_ECC_ON 0
160 #define CONFIG_POST (CFG_POST_CACHE | \
171 CFG_POST_WATCHDOG | \
179 #define CONFIG_POST_WATCHDOG {\
180 "Watchdog timer test", \
182 "This test checks the watchdog timer.", \
183 POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT, \
184 &lwmon5_watchdog_post_test, \
190 #define CONFIG_POST_BSPEC1 {\
193 "This test returns result of dsPIC READY test run earlier.", \
194 POST_RAM | POST_ALWAYS, \
195 &dspic_init_post_test, \
201 #define CONFIG_POST_BSPEC2 {\
204 "This test gets result of dsPIC POST and dsPIC version.", \
205 POST_RAM | POST_ALWAYS, \
212 #define CONFIG_POST_BSPEC3 {\
215 "This test checks FPGA registers and memory.", \
216 POST_RAM | POST_ALWAYS, \
223 #define CONFIG_POST_BSPEC4 {\
226 "This test checks GDC registers and memory.", \
227 POST_RAM | POST_ALWAYS, \
234 #define CONFIG_POST_BSPEC5 {\
237 "This test checks GPIO_62_EPX pin indicating power failure.", \
238 POST_RAM | POST_MANUAL | POST_NORMAL | POST_SLOWTEST, \
239 &sysmon1_post_test, \
245 #define CFG_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */
246 #define CONFIG_LOGBUFFER
247 #define CONFIG_ALT_LH_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP1)
248 #define CONFIG_ALT_LB_ADDR (CFG_OCM_BASE)
249 #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
251 /*-----------------------------------------------------------------------
253 *----------------------------------------------------------------------*/
254 #define CONFIG_HARD_I2C 1 /* I2C with hardware support */
255 #undef CONFIG_SOFT_I2C /* I2C bit-banged */
256 #define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
257 #define CFG_I2C_SLAVE 0x7F
259 #define CFG_I2C_EEPROM_ADDR 0x53 /* EEPROM AT24C128 */
260 #define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
261 #define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel AT24C128 has */
262 /* 64 byte page write mode using*/
263 /* last 6 bits of the address */
264 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
265 #define CFG_EEPROM_PAGE_WRITE_ENABLE
267 #define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */
268 #define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */
269 #define CFG_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */
270 #define CFG_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */
272 #define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */
274 #define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */
275 #define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
276 #define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */
279 #define CONFIG_PREBOOT "setenv bootdelay 15"
281 #undef CONFIG_BOOTARGS
283 #define CONFIG_EXTRA_ENV_SETTINGS \
284 "hostname=lwmon5\0" \
288 "nfsargs=setenv bootargs root=/dev/nfs rw " \
289 "nfsroot=${serverip}:${rootpath}\0" \
290 "ramargs=setenv bootargs root=/dev/ram rw\0" \
291 "addip=setenv bootargs ${bootargs} " \
292 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
293 ":${hostname}:${netdev}:off panic=1\0" \
294 "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\
295 "addmisc=setenv bootargs ${bootargs} rtc-pcf8563.probe=0,0x51\0"\
296 "flash_nfs=run nfsargs addip addtty addmisc;" \
297 "bootm ${kernel_addr}\0" \
298 "flash_self=run ramargs addip addtty addmisc;" \
299 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
300 "net_nfs=tftp 200000 ${bootfile};" \
301 "run nfsargs addip addtty addmisc;bootm\0" \
302 "rootpath=/opt/eldk/ppc_4xxFP\0" \
303 "bootfile=/tftpboot/lwmon5/uImage\0" \
304 "kernel_addr=FC000000\0" \
305 "ramdisk_addr=FC180000\0" \
306 "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \
307 "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \
308 "cp.b 200000 FFF80000 80000\0" \
309 "upd=run load update\0" \
310 "lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \
313 #define CONFIG_BOOTCOMMAND "run flash_self"
316 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */
318 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
321 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
322 #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
324 #define CONFIG_IBM_EMAC4_V4 1
325 #define CONFIG_MII 1 /* MII PHY management */
326 #define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */
328 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */
329 #define CONFIG_PHY_RESET_DELAY 300
331 #define CONFIG_HAS_ETH0
332 #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
334 #define CONFIG_NET_MULTI 1
335 #define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
336 #define CONFIG_PHY1_ADDR 1
340 #define CONFIG_VIDEO_MB862xx
341 #define CONFIG_CFB_CONSOLE
342 #define CONFIG_VIDEO_LOGO
343 #define CONFIG_CONSOLE_EXTRA_INFO
344 #define VIDEO_FB_16BPP_PIXEL_SWAP
346 #define CONFIG_VGA_AS_SINGLE_DEVICE
347 #define CONFIG_VIDEO_SW_CURSOR
348 #define CONFIG_SPLASH_SCREEN
352 #define CONFIG_USB_OHCI
353 #define CONFIG_USB_STORAGE
355 /* Comment this out to enable USB 1.1 device */
356 #define USB_2_0_DEVICE
358 #endif /* CONFIG_440EPX */
361 #define CONFIG_MAC_PARTITION
362 #define CONFIG_DOS_PARTITION
363 #define CONFIG_ISO_PARTITION
368 #define CONFIG_BOOTP_BOOTFILESIZE
369 #define CONFIG_BOOTP_BOOTPATH
370 #define CONFIG_BOOTP_GATEWAY
371 #define CONFIG_BOOTP_HOSTNAME
374 * Command line configuration.
376 #include <config_cmd_default.h>
378 #define CONFIG_CMD_ASKENV
379 #define CONFIG_CMD_DATE
380 #define CONFIG_CMD_DHCP
381 #define CONFIG_CMD_DIAG
382 #define CONFIG_CMD_EEPROM
383 #define CONFIG_CMD_ELF
384 #define CONFIG_CMD_FAT
385 #define CONFIG_CMD_I2C
386 #define CONFIG_CMD_IRQ
387 #define CONFIG_CMD_LOG
388 #define CONFIG_CMD_MII
389 #define CONFIG_CMD_NET
390 #define CONFIG_CMD_NFS
391 #define CONFIG_CMD_PCI
392 #define CONFIG_CMD_PING
393 #define CONFIG_CMD_REGINFO
394 #define CONFIG_CMD_SDRAM
397 #define CONFIG_CMD_BMP
401 #define CONFIG_CMD_USB
404 /*-----------------------------------------------------------------------
405 * Miscellaneous configurable options
406 *----------------------------------------------------------------------*/
407 #define CONFIG_SUPPORT_VFAT
409 #define CFG_LONGHELP /* undef to save memory */
410 #define CFG_PROMPT "=> " /* Monitor Command Prompt */
412 #define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
413 #ifdef CFG_HUSH_PARSER
414 #define CFG_PROMPT_HUSH_PS2 "> "
417 #if defined(CONFIG_CMD_KGDB)
418 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
420 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
422 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
423 #define CFG_MAXARGS 16 /* max number of command args */
424 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
426 #define CFG_MEMTEST_START 0x0400000 /* memtest works on */
427 #define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
429 #define CFG_LOAD_ADDR 0x100000 /* default load address */
430 #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
432 #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
434 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */
435 #define CONFIG_LOOPW 1 /* enable loopw command */
436 #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
437 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
438 #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
440 /*-----------------------------------------------------------------------
442 *----------------------------------------------------------------------*/
444 #define CONFIG_PCI /* include pci support */
445 #undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
446 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
447 #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
449 /* Board-specific PCI */
450 #define CFG_PCI_TARGET_INIT
451 #define CFG_PCI_MASTER_INIT
453 #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
454 #define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
456 #define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */
457 #define CONFIG_WD_PERIOD 40000 /* in usec */
458 #define CONFIG_WD_MAX_RATE 66600 /* in ticks */
461 * For booting Linux, the board info and command line data
462 * have to be in the first 8 MB of memory, since this is
463 * the maximum mapped by the Linux kernel during initialization.
465 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
467 /*-----------------------------------------------------------------------
468 * External Bus Controller (EBC) Setup
469 *----------------------------------------------------------------------*/
470 #define CFG_FLASH CFG_FLASH_BASE
472 /* Memory Bank 0 (NOR-FLASH) initialization */
473 #define CFG_EBC_PB0AP 0x03050200
474 #define CFG_EBC_PB0CR (CFG_FLASH | 0xfc000)
476 /* Memory Bank 1 (Lime) initialization */
477 #define CFG_EBC_PB1AP 0x01004380
478 #define CFG_EBC_PB1CR (CFG_LIME_BASE_0 | 0xdc000)
480 /* Memory Bank 2 (FPGA) initialization */
481 #define CFG_EBC_PB2AP 0x01004400
482 #define CFG_EBC_PB2CR (CFG_FPGA_BASE_0 | 0x1c000)
484 /* Memory Bank 3 (FPGA2) initialization */
485 #define CFG_EBC_PB3AP 0x01004400
486 #define CFG_EBC_PB3CR (CFG_FPGA_BASE_1 | 0x1c000)
488 #define CFG_EBC_CFG 0xb8400000
490 /*-----------------------------------------------------------------------
491 * Graphics (Fujitsu Lime)
492 *----------------------------------------------------------------------*/
493 /* SDRAM Clock frequency adjustment register */
494 #define CFG_LIME_SDRAM_CLOCK 0xC1FC0038
495 /* Lime Clock frequency is to set 100MHz */
496 #define CFG_LIME_CLOCK_100MHZ 0x00000
498 /* Lime Clock frequency for 133MHz */
499 #define CFG_LIME_CLOCK_133MHZ 0x10000
502 /* SDRAM Parameter register */
503 #define CFG_LIME_MMR 0xC1FCFFFC
504 /* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars
505 and pixel flare on display when 133MHz was configured. According to
506 SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */
507 #ifdef CFG_LIME_CLOCK_133MHZ
508 #define CFG_LIME_MMR_VALUE 0x414FB7F3
510 #define CFG_LIME_MMR_VALUE 0x414FB7F2
513 /*-----------------------------------------------------------------------
515 *----------------------------------------------------------------------*/
516 #define CFG_GPIO_PHY1_RST 12
517 #define CFG_GPIO_FLASH_WP 14
518 #define CFG_GPIO_PHY0_RST 22
519 #define CFG_GPIO_DSPIC_READY 51
520 #define CFG_GPIO_EEPROM_EXT_WP 55
521 #define CFG_GPIO_HIGHSIDE 56
522 #define CFG_GPIO_EEPROM_INT_WP 57
523 #define CFG_GPIO_BOARD_RESET 58
524 #define CFG_GPIO_LIME_S 59
525 #define CFG_GPIO_LIME_RST 60
526 #define CFG_GPIO_SYSMON_STATUS 62
527 #define CFG_GPIO_WATCHDOG 63
529 /*-----------------------------------------------------------------------
530 * PPC440 GPIO Configuration
532 #define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
535 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \
536 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \
537 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \
538 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \
539 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \
540 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \
541 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \
542 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \
543 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \
544 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \
545 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \
546 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \
547 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \
548 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \
549 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \
550 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO15 */ \
551 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \
552 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \
553 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \
554 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7) */ \
555 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \
556 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \
557 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \
558 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \
559 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 GMCTxD(2) */ \
560 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 GMCTxD(3) */ \
561 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \
562 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \
563 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \
564 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \
565 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \
566 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \
570 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \
571 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \
572 {GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
573 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
574 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \
575 {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \
576 {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
577 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
578 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \
579 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \
580 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \
581 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \
582 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \
583 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \
584 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \
585 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \
586 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \
587 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO49 Unselect via TraceSelect Bit */ \
588 {GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
589 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
590 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
591 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
592 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
593 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \
594 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
595 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \
596 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
597 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
598 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
599 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
600 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
601 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
606 * Internal Definitions
610 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
611 #define BOOTFLAG_WARM 0x02 /* Software reboot */
613 #if defined(CONFIG_CMD_KGDB)
614 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
615 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
617 #endif /* __CONFIG_H */