3 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
6 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
7 * Marius Groeger <mgroeger@sysgo.de>
9 * Configuation settings for the LUBBOCK board.
11 * See file CREDITS for list of people who contributed to this
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
34 * High Level Configuration Options
37 #define CONFIG_PXA250 1 /* This is an PXA250 CPU */
38 #define CONFIG_LUBBOCK 1 /* on an LUBBOCK Board */
41 #define CONFIG_SHARP_LM8V31
44 #define BOARD_LATE_INIT 1
45 #define CONFIG_DOS_PARTITION
47 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
49 /* we will never enable dcache, because we have to setup MMU first */
50 #define CONFIG_SYS_NO_DCACHE
53 * Size of malloc() pool
55 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
56 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
61 #define CONFIG_NET_MULTI
62 #define CONFIG_LAN91C96
63 #define CONFIG_LAN91C96_BASE 0x0C000000
66 * select serial console configuration
68 #define CONFIG_PXA_SERIAL
69 #define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
71 /* allow to overwrite serial and ethaddr */
72 #define CONFIG_ENV_OVERWRITE
74 #define CONFIG_BAUDRATE 115200
80 #define CONFIG_BOOTP_BOOTFILESIZE
81 #define CONFIG_BOOTP_BOOTPATH
82 #define CONFIG_BOOTP_GATEWAY
83 #define CONFIG_BOOTP_HOSTNAME
87 * Command line configuration.
89 #include <config_cmd_default.h>
91 #define CONFIG_CMD_FAT
94 #define CONFIG_BOOTDELAY 3
95 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b
96 #define CONFIG_NETMASK 255.255.0.0
97 #define CONFIG_IPADDR 192.168.0.21
98 #define CONFIG_SERVERIP 192.168.0.250
99 #define CONFIG_BOOTCOMMAND "bootm 80000"
100 #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
101 #define CONFIG_CMDLINE_TAG
102 #define CONFIG_TIMESTAMP
104 #if defined(CONFIG_CMD_KGDB)
105 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
106 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
110 * Miscellaneous configurable options
112 #define CONFIG_SYS_HUSH_PARSER 1
113 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
115 #define CONFIG_SYS_LONGHELP /* undef to save memory */
116 #ifdef CONFIG_SYS_HUSH_PARSER
117 #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
119 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
121 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
122 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
123 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
124 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
125 #define CONFIG_SYS_DEVICE_NULLDEV 1
127 #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
128 #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
130 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
132 #define CONFIG_SYS_HZ 1000
133 #define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
135 /* valid baudrates */
136 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
139 #define CONFIG_PXA_MMC
140 #define CONFIG_CMD_MMC
141 #define CONFIG_SYS_MMC_BASE 0xF0000000
147 * The stack sizes are set up in start.S using the settings below
149 #define CONFIG_STACKSIZE (128*1024) /* regular stack */
150 #ifdef CONFIG_USE_IRQ
151 #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
152 #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
156 * Physical Memory Map
158 #define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
159 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
160 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
161 #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
162 #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
163 #define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
164 #define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
165 #define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
166 #define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
168 #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
169 #define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
170 #define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
171 #define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
172 #define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
174 #define CONFIG_SYS_DRAM_BASE 0xa0000000
175 #define CONFIG_SYS_DRAM_SIZE 0x04000000
177 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
179 #define FPGA_REGS_BASE_PHYSICAL 0x08000000
184 #define CONFIG_SYS_GPSR0_VAL 0x00008000
185 #define CONFIG_SYS_GPSR1_VAL 0x00FC0382
186 #define CONFIG_SYS_GPSR2_VAL 0x0001FFFF
187 #define CONFIG_SYS_GPCR0_VAL 0x00000000
188 #define CONFIG_SYS_GPCR1_VAL 0x00000000
189 #define CONFIG_SYS_GPCR2_VAL 0x00000000
190 #define CONFIG_SYS_GPDR0_VAL 0x0060A800
191 #define CONFIG_SYS_GPDR1_VAL 0x00FF0382
192 #define CONFIG_SYS_GPDR2_VAL 0x0001C000
193 #define CONFIG_SYS_GAFR0_L_VAL 0x98400000
194 #define CONFIG_SYS_GAFR0_U_VAL 0x00002950
195 #define CONFIG_SYS_GAFR1_L_VAL 0x000A9558
196 #define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
197 #define CONFIG_SYS_GAFR2_L_VAL 0xA0000000
198 #define CONFIG_SYS_GAFR2_U_VAL 0x00000002
200 #define CONFIG_SYS_PSSR_VAL 0x20
205 #define CONFIG_SYS_MSC0_VAL 0x23F223F2
206 #define CONFIG_SYS_MSC1_VAL 0x3FF1A441
207 #define CONFIG_SYS_MSC2_VAL 0x7FF97FF1
208 #define CONFIG_SYS_MDCNFG_VAL 0x00001AC9
209 #define CONFIG_SYS_MDREFR_VAL 0x00018018
210 #define CONFIG_SYS_MDMRS_VAL 0x00000000
213 * PCMCIA and CF Interfaces
215 #define CONFIG_SYS_MECR_VAL 0x00000000
216 #define CONFIG_SYS_MCMEM0_VAL 0x00010504
217 #define CONFIG_SYS_MCMEM1_VAL 0x00010504
218 #define CONFIG_SYS_MCATT0_VAL 0x00010504
219 #define CONFIG_SYS_MCATT1_VAL 0x00010504
220 #define CONFIG_SYS_MCIO0_VAL 0x00004715
221 #define CONFIG_SYS_MCIO1_VAL 0x00004715
223 #define _LED 0x08000010
224 #define LED_BLANK 0x08000040
227 * FLASH and environment organization
229 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
230 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
232 /* timeout values are in ticks */
233 #define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
234 #define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
236 /* NOTE: many default partitioning schemes assume the kernel starts at the
237 * second sector, not an environment. You have been warned!
239 #define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE
240 #define CONFIG_ENV_IS_IN_FLASH 1
241 #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
242 #define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE
243 #define CONFIG_ENV_SIZE (PHYS_FLASH_SECT_SIZE / 16)
249 #define WHOAMI_OFFSET 0x00
250 #define HEXLED_OFFSET 0x10
251 #define BLANKLED_OFFSET 0x40
252 #define DISCRETELED_OFFSET 0x40
253 #define CNFG_SWITCHES_OFFSET 0x50
254 #define USER_SWITCHES_OFFSET 0x60
255 #define MISC_WR_OFFSET 0x80
256 #define MISC_RD_OFFSET 0x90
257 #define INT_MASK_OFFSET 0xC0
258 #define INT_CLEAR_OFFSET 0xD0
259 #define GP_OFFSET 0x100
261 #endif /* __CONFIG_H */