include/configs/lsxl.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (c) 2012 Michael Walle
   4  * Michael Walle <michael@walle.cc>
   5  */
   6
   7 #ifndef _CONFIG_LSXL_H
   8 #define _CONFIG_LSXL_H
   9
  10 /*
  11  * Version number information
  12  */
  13 #if defined(CONFIG_LSCHLV2)
  14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
  15 #define CONFIG_MACH_TYPE 3006
  16 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
  17 #elif defined(CONFIG_LSXHL)
  18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
  19 #define CONFIG_MACH_TYPE 2663
  20 /* CONFIG_SYS_TCLK is 200000000 by default */
  21 #else
  22 #error "unknown board"
  23 #endif
  24
  25 /*
  26  * General configuration options
  27  */
  28 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  29 #define CONFIG_KW88F6281                /* SOC Name */
  30
  31 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  32 #define CONFIG_SHOW_BOOT_PROGRESS
  33
  34 #define CONFIG_KIRKWOOD_GPIO
  35
  36 /*
  37  * Commands configuration
  38  */
  39
  40 /*
  41  * mv-common.h should be defined after CMD configs since it used them
  42  * to enable certain macros
  43  */
  44 #include "mv-common.h"
  45
  46 /* loading initramfs images without uimage header */
  47
  48 /*
  49  *  Environment variables configurations
  50  */
  51 #ifdef CONFIG_SPI_FLASH
  52 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  53 #define CONFIG_SYS_MAX_FLASH_SECT       8
  54 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64K */
  55 #endif
  56
  57 #define CONFIG_ENV_SIZE                 0x10000 /* 64k */
  58 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
  59
  60 /*
  61  * Default environment variables
  62  */
  63 #define CONFIG_LOADADDR         0x00800000
  64
  65 #if defined(CONFIG_LSXHL)
  66 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
  67 #elif defined(CONFIG_LSCHLV2)
  68 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
  69 #else
  70 #error "Unsupported board"
  71 #endif
  72
  73 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  74         "bootsource=legacy\0"                                           \
  75         "hdpart=0:1\0"                                                  \
  76         "kernel_addr=0x00800000\0"                                      \
  77         "ramdisk_addr=0x01000000\0"                                     \
  78         "fdt_addr=0x00ff0000\0"                                         \
  79         "bootcmd_legacy=sata init "                                     \
  80                 "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
  81                 "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
  82                 "&& bootm ${kernel_addr} ${ramdisk_addr}\0"             \
  83         "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
  84                 "&& tftpboot ${ramdisk_addr} initrd.img "               \
  85                 "&& setenv ramdisk_len ${filesize} "                    \
  86                 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
  87                 "&& bootz ${kernel_addr} "                              \
  88                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
  89         "bootcmd_hdd=sata init "                                        \
  90                 "&& load sata ${hdpart} ${kernel_addr} /vmlinuz "       \
  91                 "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img "   \
  92                 "&& setenv ramdisk_len ${filesize} "                    \
  93                 "&& load sata ${hdpart} ${fdt_addr} /dtb "              \
  94                 "&& bootz ${kernel_addr} "                              \
  95                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
  96         "bootcmd_usb=usb start "                                        \
  97                 "&& load usb 0:1 ${kernel_addr} /vmlinuz "              \
  98                 "&& load usb 0:1 ${ramdisk_addr} /initrd.img "          \
  99                 "&& setenv ramdisk_len ${filesize} "                    \
 100                 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "       \
 101                 "&& bootz ${kernel_addr} "                              \
 102                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 103         "bootcmd_rescue=run config_nc_dhcp; run nc\0"                   \
 104         "eraseenv=sf probe 0 "                                          \
 105                 "&& sf erase " __stringify(CONFIG_ENV_OFFSET)           \
 106                         " +" __stringify(CONFIG_ENV_SIZE) "\0"          \
 107         "config_nc_dhcp=setenv autoload_old ${autoload}; "              \
 108                 "setenv autoload no "                                   \
 109                 "&& bootp "                                             \
 110                 "&& setenv ncip "                                       \
 111                 "&& setenv autoload ${autoload_old}; "                  \
 112                 "setenv autoload_old\0"                                 \
 113         "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
 114                 "setenv ncip; setenv gatewayip; setenv ethact; "        \
 115                 "setenv bootfile; setenv dnsip; "                       \
 116                 "setenv bootsource legacy; run ser\0"                   \
 117         "restore_env=run standard_env; saveenv; reset\0"                \
 118         "ser=setenv stdin serial; setenv stdout serial; "               \
 119                 "setenv stderr serial\0"                                \
 120         "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"      \
 121         "stdin=serial\0"                                                \
 122         "stdout=serial\0"                                               \
 123         "stderr=serial\0"
 124
 125 /*
 126  * Ethernet Driver configuration
 127  */
 128 #ifdef CONFIG_CMD_NET
 129 #define CONFIG_MVGBE_PORTS              {0, 1} /* enable port 1 only */
 130 #define CONFIG_PHY_BASE_ADR             7
 131 #undef CONFIG_RESET_PHY_R
 132 #endif /* CONFIG_CMD_NET */
 133
 134 #ifdef CONFIG_SATA
 135 #define CONFIG_SYS_SATA_MAX_DEVICE 1
 136 #define CONFIG_SYS_64BIT_LBA
 137 #define CONFIG_LBA48
 138 #endif
 139
 140 #endif /* _CONFIG_LSXL_H */