1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (c) 2012 Michael Walle
4 * Michael Walle <michael@walle.cc>
11 * Version number information
13 #if defined(CONFIG_LSCHLV2)
14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
15 #define CONFIG_MACH_TYPE 3006
16 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
17 #elif defined(CONFIG_LSXHL)
18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
19 #define CONFIG_MACH_TYPE 2663
20 /* CONFIG_SYS_TCLK is 200000000 by default */
22 #error "unknown board"
26 * General configuration options
28 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
29 #define CONFIG_KW88F6281 /* SOC Name */
31 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
32 #define CONFIG_SHOW_BOOT_PROGRESS
34 #define CONFIG_KIRKWOOD_GPIO
37 * Commands configuration
41 * mv-common.h should be defined after CMD configs since it used them
42 * to enable certain macros
44 #include "mv-common.h"
46 /* loading initramfs images without uimage header */
49 #undef CONFIG_ENV_SPI_MAX_HZ
50 #define CONFIG_ENV_SPI_MAX_HZ 25000000
53 * Environment variables configurations
55 #ifdef CONFIG_SPI_FLASH
56 #define CONFIG_SYS_MAX_FLASH_BANKS 1
57 #define CONFIG_SYS_MAX_FLASH_SECT 8
58 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
61 #define CONFIG_ENV_SIZE 0x10000 /* 64k */
62 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
65 * Default environment variables
67 #define CONFIG_LOADADDR 0x00800000
69 #if defined(CONFIG_LSXHL)
70 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
71 #elif defined(CONFIG_LSCHLV2)
72 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
74 #error "Unsupported board"
77 #define CONFIG_EXTRA_ENV_SETTINGS \
78 "bootsource=legacy\0" \
80 "kernel_addr=0x00800000\0" \
81 "ramdisk_addr=0x01000000\0" \
82 "fdt_addr=0x00ff0000\0" \
83 "bootcmd_legacy=ide reset " \
84 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
85 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
86 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
87 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \
88 "&& tftpboot ${ramdisk_addr} initrd.img " \
89 "&& setenv ramdisk_len ${filesize} " \
90 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
91 "&& bootz ${kernel_addr} " \
92 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
93 "bootcmd_hdd=ide reset " \
94 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \
95 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \
96 "&& setenv ramdisk_len ${filesize} " \
97 "&& load ide ${hdpart} ${fdt_addr} /dtb " \
98 "&& bootz ${kernel_addr} " \
99 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
100 "bootcmd_usb=usb start " \
101 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \
102 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
103 "&& setenv ramdisk_len ${filesize} " \
104 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \
105 "&& bootz ${kernel_addr} " \
106 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
107 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \
108 "eraseenv=sf probe 0 " \
109 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
110 " +" __stringify(CONFIG_ENV_SIZE) "\0" \
111 "config_nc_dhcp=setenv autoload_old ${autoload}; " \
112 "setenv autoload no " \
115 "&& setenv autoload ${autoload_old}; " \
116 "setenv autoload_old\0" \
117 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
118 "setenv ncip; setenv gatewayip; setenv ethact; " \
119 "setenv bootfile; setenv dnsip; " \
120 "setenv bootsource legacy; run ser\0" \
121 "restore_env=run standard_env; saveenv; reset\0" \
122 "ser=setenv stdin serial; setenv stdout serial; " \
123 "setenv stderr serial\0" \
124 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
130 * Ethernet Driver configuration
132 #ifdef CONFIG_CMD_NET
133 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
134 #define CONFIG_PHY_BASE_ADR 7
135 #undef CONFIG_RESET_PHY_R
136 #endif /* CONFIG_CMD_NET */
139 #undef CONFIG_SYS_IDE_MAXBUS
140 #define CONFIG_SYS_IDE_MAXBUS 1
141 #undef CONFIG_SYS_IDE_MAXDEVICE
142 #define CONFIG_SYS_IDE_MAXDEVICE 1
143 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
144 #define CONFIG_SYS_64BIT_LBA
147 #endif /* _CONFIG_LSXL_H */