Merge tag 'video-for-v2021.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u...
[platform/kernel/u-boot.git] / include / configs / ls2080aqds.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2017, 2019-2020 NXP
4  * Copyright 2015 Freescale Semiconductor
5  */
6
7 #ifndef __LS2_QDS_H
8 #define __LS2_QDS_H
9
10 #include "ls2080a_common.h"
11
12 #ifndef __ASSEMBLY__
13 unsigned long get_board_sys_clk(void);
14 unsigned long get_board_ddr_clk(void);
15 #endif
16
17 #ifdef CONFIG_FSL_QSPI
18 #define CONFIG_QIXIS_I2C_ACCESS
19 #if !CONFIG_IS_ENABLED(DM_I2C)
20 #define CONFIG_SYS_I2C_EARLY_INIT
21 #endif
22 #define CONFIG_SYS_I2C_IFDR_DIV         0x7e
23 #endif
24
25 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
26 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
27 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
28 #define COUNTER_FREQUENCY_REAL          (CONFIG_SYS_CLK_FREQ/4)
29
30 #define CONFIG_DDR_SPD
31 #define CONFIG_DDR_ECC
32 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
33 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
34 #define SPD_EEPROM_ADDRESS1     0x51
35 #define SPD_EEPROM_ADDRESS2     0x52
36 #define SPD_EEPROM_ADDRESS3     0x53
37 #define SPD_EEPROM_ADDRESS4     0x54
38 #define SPD_EEPROM_ADDRESS5     0x55
39 #define SPD_EEPROM_ADDRESS6     0x56    /* dummy address */
40 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
41 #define CONFIG_SYS_SPD_BUS_NUM  0       /* SPD on I2C bus 0 */
42 #define CONFIG_DIMM_SLOTS_PER_CTLR              2
43 #define CONFIG_CHIP_SELECTS_PER_CTRL            4
44 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
45 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR       1
46 #endif
47
48 /* SATA */
49 #define CONFIG_SCSI_AHCI_PLAT
50
51 #define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
52 #define CONFIG_SYS_SATA2                        AHCI_BASE_ADDR2
53
54 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
55 #define CONFIG_SYS_SCSI_MAX_LUN                 1
56 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
57                                                 CONFIG_SYS_SCSI_MAX_LUN)
58
59 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
60 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
61 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
62
63 #define CONFIG_SYS_NOR0_CSPR                                    \
64         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
65         CSPR_PORT_SIZE_16                                       | \
66         CSPR_MSEL_NOR                                           | \
67         CSPR_V)
68 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
69         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
70         CSPR_PORT_SIZE_16                                       | \
71         CSPR_MSEL_NOR                                           | \
72         CSPR_V)
73 #define CONFIG_SYS_NOR1_CSPR                                    \
74         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
75         CSPR_PORT_SIZE_16                                       | \
76         CSPR_MSEL_NOR                                           | \
77         CSPR_V)
78 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
79         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
80         CSPR_PORT_SIZE_16                                       | \
81         CSPR_MSEL_NOR                                           | \
82         CSPR_V)
83 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
84 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
85                                 FTIM0_NOR_TEADC(0x5) | \
86                                 FTIM0_NOR_TEAHC(0x5))
87 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
88                                 FTIM1_NOR_TRAD_NOR(0x1a) |\
89                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
90 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
91                                 FTIM2_NOR_TCH(0x4) | \
92                                 FTIM2_NOR_TWPH(0x0E) | \
93                                 FTIM2_NOR_TWP(0x1c))
94 #define CONFIG_SYS_NOR_FTIM3    0x04000000
95 #define CONFIG_SYS_IFC_CCR      0x01000000
96
97 #ifdef CONFIG_MTD_NOR_FLASH
98 #define CONFIG_SYS_FLASH_QUIET_TEST
99 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
100
101 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
102 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
103 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
104 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
105
106 #define CONFIG_SYS_FLASH_EMPTY_INFO
107 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
108                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
109 #endif
110
111 #define CONFIG_NAND_FSL_IFC
112 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
113 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
114
115 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
116 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
117                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
118                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
119                                 | CSPR_V)
120 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
121
122 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
123                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
124                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
125                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
126                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
127                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
128                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
129
130 #define CONFIG_SYS_NAND_ONFI_DETECTION
131
132 /* ONFI NAND Flash mode0 Timing Params */
133 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
134                                         FTIM0_NAND_TWP(0x18)   | \
135                                         FTIM0_NAND_TWCHT(0x07) | \
136                                         FTIM0_NAND_TWH(0x0a))
137 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
138                                         FTIM1_NAND_TWBE(0x39)  | \
139                                         FTIM1_NAND_TRR(0x0e)   | \
140                                         FTIM1_NAND_TRP(0x18))
141 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
142                                         FTIM2_NAND_TREH(0x0a) | \
143                                         FTIM2_NAND_TWHRE(0x1e))
144 #define CONFIG_SYS_NAND_FTIM3           0x0
145
146 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
147 #define CONFIG_SYS_MAX_NAND_DEVICE      1
148 #define CONFIG_MTD_NAND_VERIFY_WRITE
149
150 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
151
152 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
153 #define QIXIS_LBMAP_SWITCH              0x06
154 #define QIXIS_LBMAP_MASK                0x0f
155 #define QIXIS_LBMAP_SHIFT               0
156 #define QIXIS_LBMAP_DFLTBANK            0x00
157 #define QIXIS_LBMAP_ALTBANK             0x04
158 #define QIXIS_LBMAP_NAND                0x09
159 #define QIXIS_LBMAP_SD                  0x00
160 #define QIXIS_LBMAP_QSPI                0x0f
161 #define QIXIS_RST_CTL_RESET             0x31
162 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
163 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
164 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
165 #define QIXIS_RCW_SRC_NAND              0x107
166 #define QIXIS_RCW_SRC_SD                0x40
167 #define QIXIS_RCW_SRC_QSPI              0x62
168 #define QIXIS_RST_FORCE_MEM             0x01
169
170 #define CONFIG_SYS_CSPR3_EXT    (0x0)
171 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
172                                 | CSPR_PORT_SIZE_8 \
173                                 | CSPR_MSEL_GPCM \
174                                 | CSPR_V)
175 #define CONFIG_SYS_CSPR3_FINAL  (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
176                                 | CSPR_PORT_SIZE_8 \
177                                 | CSPR_MSEL_GPCM \
178                                 | CSPR_V)
179
180 #define CONFIG_SYS_AMASK3       IFC_AMASK(64*1024)
181 #define CONFIG_SYS_CSOR3        CSOR_GPCM_ADM_SHIFT(12)
182 /* QIXIS Timing parameters for IFC CS3 */
183 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
184                                         FTIM0_GPCM_TEADC(0x0e) | \
185                                         FTIM0_GPCM_TEAHC(0x0e))
186 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
187                                         FTIM1_GPCM_TRAD(0x3f))
188 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0xf) | \
189                                         FTIM2_GPCM_TCH(0xf) | \
190                                         FTIM2_GPCM_TWP(0x3E))
191 #define CONFIG_SYS_CS3_FTIM3            0x0
192
193 #if defined(CONFIG_SPL)
194 #if defined(CONFIG_NAND_BOOT)
195 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
196 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR_EARLY
197 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR0_CSPR
198 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
199 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
200 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
201 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
202 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
203 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
204 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
205 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR_EARLY
206 #define CONFIG_SYS_CSPR2_FINAL          CONFIG_SYS_NOR1_CSPR
207 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK_EARLY
208 #define CONFIG_SYS_AMASK2_FINAL         CONFIG_SYS_NOR_AMASK
209 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
210 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
211 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
212 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
213 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
214 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
215 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
216 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
217 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
218 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
219 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
220 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
221 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
222
223 #define CONFIG_SPL_PAD_TO               0x20000
224 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 * 1024)
225 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (640 * 1024)
226 #endif
227 #else
228 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
229 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
230 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
231 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
232 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
233 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
234 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
235 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
236 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
237 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
238 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
239 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
240 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
241 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
242 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
243 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
244 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
245 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
246 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
247 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
248 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
249 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
250 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
251 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
252 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
253 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
254 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
255 #endif
256
257 /* Debug Server firmware */
258 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
259 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL
260
261 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
262
263 /*
264  * I2C
265  */
266 #define I2C_MUX_PCA_ADDR                0x77
267 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
268
269 /* I2C bus multiplexer */
270 #define I2C_MUX_CH_DEFAULT      0x8
271
272 /* SPI */
273 #ifdef CONFIG_FSL_DSPI
274 #define CONFIG_SPI_FLASH_STMICRO
275 #define CONFIG_SPI_FLASH_SST
276 #define CONFIG_SPI_FLASH_EON
277 #endif
278
279 #ifdef CONFIG_FSL_QSPI
280 #define CONFIG_SPI_FLASH_SPANSION
281 #endif
282 /*
283  * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure.
284  * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0
285  * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1
286  */
287 #define FSL_QIXIS_BRDCFG9_QSPI          0x1
288
289 /*
290  * MMC
291  */
292 #ifdef CONFIG_MMC
293 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
294         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
295 #endif
296
297 /*
298  * RTC configuration
299  */
300 #define RTC
301 #define CONFIG_RTC_DS3231               1
302 #define CONFIG_RTC_ENABLE_32KHZ_OUTPUT
303 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
304 #define CONFIG_RTC_ENABLE_32KHZ_OUTPUT
305
306 /* EEPROM */
307 #define CONFIG_ID_EEPROM
308 #define CONFIG_SYS_I2C_EEPROM_NXID
309 #define CONFIG_SYS_EEPROM_BUS_NUM       0
310 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
311 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
312 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
313 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
314
315 #define CONFIG_FSL_MEMAC
316
317 #ifdef CONFIG_PCI
318 #define CONFIG_PCI_SCAN_SHOW
319 #endif
320
321 /*  MMC  */
322 #ifdef CONFIG_MMC
323 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
324 #endif
325
326 /* Initial environment variables */
327 #undef CONFIG_EXTRA_ENV_SETTINGS
328 #ifdef CONFIG_NXP_ESBC
329 #define CONFIG_EXTRA_ENV_SETTINGS               \
330         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
331         "loadaddr=0x80100000\0"                 \
332         "kernel_addr=0x100000\0"                \
333         "ramdisk_addr=0x800000\0"               \
334         "ramdisk_size=0x2000000\0"              \
335         "fdt_high=0xa0000000\0"                 \
336         "initrd_high=0xffffffffffffffff\0"      \
337         "kernel_start=0x581000000\0"            \
338         "kernel_load=0xa0000000\0"              \
339         "kernel_size=0x2800000\0"               \
340         "mcmemsize=0x40000000\0"                \
341         "mcinitcmd=esbc_validate 0x580640000;"  \
342         "esbc_validate 0x580680000;"            \
343         "fsl_mc start mc 0x580a00000"           \
344         " 0x580e00000 \0"
345 #else
346 #ifdef CONFIG_TFABOOT
347 #define SD_MC_INIT_CMD                          \
348         "mmcinfo;mmc read 0x80a00000 0x5000 0x1200;"  \
349         "mmc read 0x80e00000 0x7000 0x800;" \
350         "fsl_mc start mc 0x80a00000 0x80e00000\0"
351 #define IFC_MC_INIT_CMD                         \
352         "fsl_mc start mc 0x580a00000" \
353         " 0x580e00000 \0"
354 #define CONFIG_EXTRA_ENV_SETTINGS               \
355         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
356         "loadaddr=0x80100000\0"                 \
357         "loadaddr_sd=0x90100000\0"                 \
358         "kernel_addr=0x581000000\0"                       \
359         "kernel_addr_sd=0x8000\0"                \
360         "ramdisk_addr=0x800000\0"               \
361         "ramdisk_size=0x2000000\0"              \
362         "fdt_high=0xa0000000\0"                 \
363         "initrd_high=0xffffffffffffffff\0"      \
364         "kernel_start=0x581000000\0"            \
365         "kernel_start_sd=0x8000\0"              \
366         "kernel_load=0xa0000000\0"              \
367         "kernel_size=0x2800000\0"               \
368         "kernel_size_sd=0x14000\0"               \
369         "load_addr=0xa0000000\0"                            \
370         "kernelheader_addr=0x580600000\0"       \
371         "kernelheader_addr_r=0x80200000\0"      \
372         "kernelheader_size=0x40000\0"           \
373         "BOARD=ls2088aqds\0" \
374         "mcmemsize=0x70000000 \0" \
375         "scriptaddr=0x80000000\0"               \
376         "scripthdraddr=0x80080000\0"            \
377         IFC_MC_INIT_CMD                         \
378         BOOTENV                                 \
379         "boot_scripts=ls2088aqds_boot.scr\0"    \
380         "boot_script_hdr=hdr_ls2088aqds_bs.out\0"       \
381         "scan_dev_for_boot_part="               \
382                 "part list ${devtype} ${devnum} devplist; "     \
383                 "env exists devplist || setenv devplist 1; "    \
384                 "for distro_bootpart in ${devplist}; do "       \
385                         "if fstype ${devtype} "                 \
386                                 "${devnum}:${distro_bootpart} " \
387                                 "bootfstype; then "             \
388                                 "run scan_dev_for_boot; "       \
389                         "fi; "                                  \
390                 "done\0"                                        \
391         "boot_a_script="                                        \
392                 "load ${devtype} ${devnum}:${distro_bootpart} " \
393                         "${scriptaddr} ${prefix}${script}; "    \
394                 "env exists secureboot && load ${devtype} "     \
395                         "${devnum}:${distro_bootpart} "         \
396                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
397                         "&& esbc_validate ${scripthdraddr};"    \
398                 "source ${scriptaddr}\0"                        \
399         "nor_bootcmd=echo Trying load from nor..;"              \
400                 "cp.b $kernel_addr $load_addr "                 \
401                 "$kernel_size ; env exists secureboot && "      \
402                 "cp.b $kernelheader_addr $kernelheader_addr_r " \
403                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
404                 "bootm $load_addr#$BOARD\0"     \
405         "sd_bootcmd=echo Trying load from SD ..;" \
406         "mmcinfo; mmc read $load_addr "         \
407         "$kernel_addr_sd $kernel_size_sd && "   \
408         "bootm $load_addr#$BOARD\0"
409 #elif defined(CONFIG_SD_BOOT)
410 #define CONFIG_EXTRA_ENV_SETTINGS               \
411         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
412         "loadaddr=0x90100000\0"                 \
413         "kernel_addr=0x800\0"                \
414         "ramdisk_addr=0x800000\0"               \
415         "ramdisk_size=0x2000000\0"              \
416         "fdt_high=0xa0000000\0"                 \
417         "initrd_high=0xffffffffffffffff\0"      \
418         "kernel_start=0x8000\0"              \
419         "kernel_load=0xa0000000\0"              \
420         "kernel_size=0x14000\0"               \
421         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
422         "mmc read 0x80100000 0x7000 0x800;" \
423         "fsl_mc start mc 0x80000000 0x80100000\0"       \
424         "mcmemsize=0x70000000 \0"
425 #else
426 #define CONFIG_EXTRA_ENV_SETTINGS               \
427         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
428         "loadaddr=0x80100000\0"                 \
429         "kernel_addr=0x100000\0"                \
430         "ramdisk_addr=0x800000\0"               \
431         "ramdisk_size=0x2000000\0"              \
432         "fdt_high=0xa0000000\0"                 \
433         "initrd_high=0xffffffffffffffff\0"      \
434         "kernel_start=0x581000000\0"            \
435         "kernel_load=0xa0000000\0"              \
436         "kernel_size=0x2800000\0"               \
437         "mcmemsize=0x40000000\0"                \
438         "mcinitcmd=fsl_mc start mc 0x580a00000" \
439         " 0x580e00000 \0"
440 #endif /* CONFIG_TFABOOT */
441 #endif /* CONFIG_NXP_ESBC */
442
443 #ifdef CONFIG_TFABOOT
444 #define BOOT_TARGET_DEVICES(func) \
445         func(USB, usb, 0) \
446         func(MMC, mmc, 0) \
447         func(SCSI, scsi, 0) \
448         func(DHCP, dhcp, na)
449 #include <config_distro_bootcmd.h>
450
451 #define SD_BOOTCOMMAND                                          \
452                         "env exists mcinitcmd && env exists secureboot "\
453                         "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
454                         "&& esbc_validate $load_addr; "                 \
455                         "env exists mcinitcmd && run mcinitcmd "        \
456                         "&& mmc read 0x80d00000 0x6800 0x800 "          \
457                         "&& fsl_mc lazyapply dpl 0x80d00000; "          \
458                         "run distro_bootcmd;run sd_bootcmd; "           \
459                         "env exists secureboot && esbc_halt;"
460
461 #define IFC_NOR_BOOTCOMMAND                                             \
462                         "env exists mcinitcmd && env exists secureboot "\
463                         "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
464                         "&& fsl_mc lazyapply dpl 0x580d00000;"          \
465                         "run distro_bootcmd;run nor_bootcmd; "          \
466                         "env exists secureboot && esbc_halt;"
467 #endif
468
469 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
470 #define CONFIG_FSL_MEMAC
471 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
472 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
473 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
474 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
475
476 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
477 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
478 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
479 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
480 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
481 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
482 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
483 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
484 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
485 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
486 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
487 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
488 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
489 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
490 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
491 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
492
493 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
494
495 #endif
496
497 #include <asm/fsl_secure_boot.h>
498
499 #endif /* __LS2_QDS_H */