include/configs/ls2080aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017, 2019-2020 NXP
   4  * Copyright 2015 Freescale Semiconductor
   5  */
   6
   7 #ifndef __LS2_QDS_H
   8 #define __LS2_QDS_H
   9
  10 #include "ls2080a_common.h"
  11
  12 #ifndef __ASSEMBLY__
  13 unsigned long get_board_sys_clk(void);
  14 unsigned long get_board_ddr_clk(void);
  15 #endif
  16
  17 #ifdef CONFIG_FSL_QSPI
  18 #define CONFIG_QIXIS_I2C_ACCESS
  19 #if !CONFIG_IS_ENABLED(DM_I2C)
  20 #define CONFIG_SYS_I2C_EARLY_INIT
  21 #endif
  22 #define CONFIG_SYS_I2C_IFDR_DIV         0x7e
  23 #endif
  24
  25 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
  26 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
  27 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
  28 #define COUNTER_FREQUENCY_REAL          (CONFIG_SYS_CLK_FREQ/4)
  29
  30 #define CONFIG_DDR_SPD
  31 #define CONFIG_DDR_ECC
  32 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  33 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  34 #define SPD_EEPROM_ADDRESS1     0x51
  35 #define SPD_EEPROM_ADDRESS2     0x52
  36 #define SPD_EEPROM_ADDRESS3     0x53
  37 #define SPD_EEPROM_ADDRESS4     0x54
  38 #define SPD_EEPROM_ADDRESS5     0x55
  39 #define SPD_EEPROM_ADDRESS6     0x56    /* dummy address */
  40 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
  41 #define CONFIG_SYS_SPD_BUS_NUM  0       /* SPD on I2C bus 0 */
  42 #define CONFIG_DIMM_SLOTS_PER_CTLR              2
  43 #define CONFIG_CHIP_SELECTS_PER_CTRL            4
  44 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
  45 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR       1
  46 #endif
  47
  48 /* SATA */
  49 #define CONFIG_SCSI_AHCI_PLAT
  50
  51 #define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
  52 #define CONFIG_SYS_SATA2                        AHCI_BASE_ADDR2
  53
  54 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  55 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  56 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  57                                                 CONFIG_SYS_SCSI_MAX_LUN)
  58
  59 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  60 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
  61 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
  62
  63 #define CONFIG_SYS_NOR0_CSPR                                    \
  64         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  65         CSPR_PORT_SIZE_16                                       | \
  66         CSPR_MSEL_NOR                                           | \
  67         CSPR_V)
  68 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  69         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  70         CSPR_PORT_SIZE_16                                       | \
  71         CSPR_MSEL_NOR                                           | \
  72         CSPR_V)
  73 #define CONFIG_SYS_NOR1_CSPR                                    \
  74         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
  75         CSPR_PORT_SIZE_16                                       | \
  76         CSPR_MSEL_NOR                                           | \
  77         CSPR_V)
  78 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
  79         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
  80         CSPR_PORT_SIZE_16                                       | \
  81         CSPR_MSEL_NOR                                           | \
  82         CSPR_V)
  83 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
  84 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
  85                                 FTIM0_NOR_TEADC(0x5) | \
  86                                 FTIM0_NOR_TEAHC(0x5))
  87 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
  88                                 FTIM1_NOR_TRAD_NOR(0x1a) |\
  89                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
  90 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
  91                                 FTIM2_NOR_TCH(0x4) | \
  92                                 FTIM2_NOR_TWPH(0x0E) | \
  93                                 FTIM2_NOR_TWP(0x1c))
  94 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  95 #define CONFIG_SYS_IFC_CCR      0x01000000
  96
  97 #ifdef CONFIG_MTD_NOR_FLASH
  98 #define CONFIG_SYS_FLASH_QUIET_TEST
  99 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 100
 101 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 102 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 103 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 104 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 105
 106 #define CONFIG_SYS_FLASH_EMPTY_INFO
 107 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
 108                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
 109 #endif
 110
 111 #define CONFIG_NAND_FSL_IFC
 112 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 113 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 114
 115 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
 116 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 117                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 118                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 119                                 | CSPR_V)
 120 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 121
 122 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 123                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 124                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 125                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 126                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 127                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 128                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 129
 130 #define CONFIG_SYS_NAND_ONFI_DETECTION
 131
 132 /* ONFI NAND Flash mode0 Timing Params */
 133 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 134                                         FTIM0_NAND_TWP(0x18)   | \
 135                                         FTIM0_NAND_TWCHT(0x07) | \
 136                                         FTIM0_NAND_TWH(0x0a))
 137 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 138                                         FTIM1_NAND_TWBE(0x39)  | \
 139                                         FTIM1_NAND_TRR(0x0e)   | \
 140                                         FTIM1_NAND_TRP(0x18))
 141 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 142                                         FTIM2_NAND_TREH(0x0a) | \
 143                                         FTIM2_NAND_TWHRE(0x1e))
 144 #define CONFIG_SYS_NAND_FTIM3           0x0
 145
 146 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 147 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 148 #define CONFIG_MTD_NAND_VERIFY_WRITE
 149
 150 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 151
 152 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 153 #define QIXIS_LBMAP_SWITCH              0x06
 154 #define QIXIS_LBMAP_MASK                0x0f
 155 #define QIXIS_LBMAP_SHIFT               0
 156 #define QIXIS_LBMAP_DFLTBANK            0x00
 157 #define QIXIS_LBMAP_ALTBANK             0x04
 158 #define QIXIS_LBMAP_NAND                0x09
 159 #define QIXIS_LBMAP_SD                  0x00
 160 #define QIXIS_LBMAP_QSPI                0x0f
 161 #define QIXIS_RST_CTL_RESET             0x31
 162 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 163 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 164 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 165 #define QIXIS_RCW_SRC_NAND              0x107
 166 #define QIXIS_RCW_SRC_SD                0x40
 167 #define QIXIS_RCW_SRC_QSPI              0x62
 168 #define QIXIS_RST_FORCE_MEM             0x01
 169
 170 #define CONFIG_SYS_CSPR3_EXT    (0x0)
 171 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 172                                 | CSPR_PORT_SIZE_8 \
 173                                 | CSPR_MSEL_GPCM \
 174                                 | CSPR_V)
 175 #define CONFIG_SYS_CSPR3_FINAL  (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 176                                 | CSPR_PORT_SIZE_8 \
 177                                 | CSPR_MSEL_GPCM \
 178                                 | CSPR_V)
 179
 180 #define CONFIG_SYS_AMASK3       IFC_AMASK(64*1024)
 181 #define CONFIG_SYS_CSOR3        CSOR_GPCM_ADM_SHIFT(12)
 182 /* QIXIS Timing parameters for IFC CS3 */
 183 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 184                                         FTIM0_GPCM_TEADC(0x0e) | \
 185                                         FTIM0_GPCM_TEAHC(0x0e))
 186 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 187                                         FTIM1_GPCM_TRAD(0x3f))
 188 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0xf) | \
 189                                         FTIM2_GPCM_TCH(0xf) | \
 190                                         FTIM2_GPCM_TWP(0x3E))
 191 #define CONFIG_SYS_CS3_FTIM3            0x0
 192
 193 #if defined(CONFIG_SPL)
 194 #if defined(CONFIG_NAND_BOOT)
 195 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 196 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR_EARLY
 197 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR0_CSPR
 198 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 199 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 200 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 201 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 202 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 203 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 204 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 205 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR_EARLY
 206 #define CONFIG_SYS_CSPR2_FINAL          CONFIG_SYS_NOR1_CSPR
 207 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK_EARLY
 208 #define CONFIG_SYS_AMASK2_FINAL         CONFIG_SYS_NOR_AMASK
 209 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 210 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 211 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 212 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 213 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 214 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 215 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 216 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 217 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 218 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 219 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 220 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 221 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 222
 223 #define CONFIG_SPL_PAD_TO               0x20000
 224 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 * 1024)
 225 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (640 * 1024)
 226 #endif
 227 #else
 228 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 229 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 230 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 231 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 232 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 233 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 234 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 235 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 236 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 237 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 238 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 239 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 240 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 241 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 242 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 243 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 244 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 245 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 246 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 247 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 248 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 249 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 250 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 251 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 252 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 253 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 254 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 255 #endif
 256
 257 /* Debug Server firmware */
 258 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 259 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL
 260
 261 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 262
 263 /*
 264  * I2C
 265  */
 266 #define I2C_MUX_PCA_ADDR                0x77
 267 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 268
 269 /* I2C bus multiplexer */
 270 #define I2C_MUX_CH_DEFAULT      0x8
 271
 272 /* SPI */
 273 #ifdef CONFIG_FSL_DSPI
 274 #define CONFIG_SPI_FLASH_STMICRO
 275 #define CONFIG_SPI_FLASH_SST
 276 #define CONFIG_SPI_FLASH_EON
 277 #endif
 278
 279 #ifdef CONFIG_FSL_QSPI
 280 #define CONFIG_SPI_FLASH_SPANSION
 281 #endif
 282 /*
 283  * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure.
 284  * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0
 285  * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1
 286  */
 287 #define FSL_QIXIS_BRDCFG9_QSPI          0x1
 288
 289 /*
 290  * MMC
 291  */
 292 #ifdef CONFIG_MMC
 293 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
 294         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 295 #endif
 296
 297 /*
 298  * RTC configuration
 299  */
 300 #define RTC
 301 #define CONFIG_RTC_DS3231               1
 302 #define CONFIG_RTC_ENABLE_32KHZ_OUTPUT
 303 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 304 #define CONFIG_RTC_ENABLE_32KHZ_OUTPUT
 305
 306 /* EEPROM */
 307 #define CONFIG_ID_EEPROM
 308 #define CONFIG_SYS_I2C_EEPROM_NXID
 309 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 310 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 311 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 312 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 313 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 314
 315 #define CONFIG_FSL_MEMAC
 316
 317 #ifdef CONFIG_PCI
 318 #define CONFIG_PCI_SCAN_SHOW
 319 #endif
 320
 321 /*  MMC  */
 322 #ifdef CONFIG_MMC
 323 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 324 #endif
 325
 326 /* Initial environment variables */
 327 #undef CONFIG_EXTRA_ENV_SETTINGS
 328 #ifdef CONFIG_NXP_ESBC
 329 #define CONFIG_EXTRA_ENV_SETTINGS               \
 330         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 331         "loadaddr=0x80100000\0"                 \
 332         "kernel_addr=0x100000\0"                \
 333         "ramdisk_addr=0x800000\0"               \
 334         "ramdisk_size=0x2000000\0"              \
 335         "fdt_high=0xa0000000\0"                 \
 336         "initrd_high=0xffffffffffffffff\0"      \
 337         "kernel_start=0x581000000\0"            \
 338         "kernel_load=0xa0000000\0"              \
 339         "kernel_size=0x2800000\0"               \
 340         "mcmemsize=0x40000000\0"                \
 341         "mcinitcmd=esbc_validate 0x580640000;"  \
 342         "esbc_validate 0x580680000;"            \
 343         "fsl_mc start mc 0x580a00000"           \
 344         " 0x580e00000 \0"
 345 #else
 346 #ifdef CONFIG_TFABOOT
 347 #define SD_MC_INIT_CMD                          \
 348         "mmcinfo;mmc read 0x80a00000 0x5000 0x1200;"  \
 349         "mmc read 0x80e00000 0x7000 0x800;" \
 350         "fsl_mc start mc 0x80a00000 0x80e00000\0"
 351 #define IFC_MC_INIT_CMD                         \
 352         "fsl_mc start mc 0x580a00000" \
 353         " 0x580e00000 \0"
 354 #define CONFIG_EXTRA_ENV_SETTINGS               \
 355         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 356         "loadaddr=0x80100000\0"                 \
 357         "loadaddr_sd=0x90100000\0"                 \
 358         "kernel_addr=0x581000000\0"                       \
 359         "kernel_addr_sd=0x8000\0"                \
 360         "ramdisk_addr=0x800000\0"               \
 361         "ramdisk_size=0x2000000\0"              \
 362         "fdt_high=0xa0000000\0"                 \
 363         "initrd_high=0xffffffffffffffff\0"      \
 364         "kernel_start=0x581000000\0"            \
 365         "kernel_start_sd=0x8000\0"              \
 366         "kernel_load=0xa0000000\0"              \
 367         "kernel_size=0x2800000\0"               \
 368         "kernel_size_sd=0x14000\0"               \
 369         "load_addr=0xa0000000\0"                            \
 370         "kernelheader_addr=0x580600000\0"       \
 371         "kernelheader_addr_r=0x80200000\0"      \
 372         "kernelheader_size=0x40000\0"           \
 373         "BOARD=ls2088aqds\0" \
 374         "mcmemsize=0x70000000 \0" \
 375         "scriptaddr=0x80000000\0"               \
 376         "scripthdraddr=0x80080000\0"            \
 377         IFC_MC_INIT_CMD                         \
 378         BOOTENV                                 \
 379         "boot_scripts=ls2088aqds_boot.scr\0"    \
 380         "boot_script_hdr=hdr_ls2088aqds_bs.out\0"       \
 381         "scan_dev_for_boot_part="               \
 382                 "part list ${devtype} ${devnum} devplist; "     \
 383                 "env exists devplist || setenv devplist 1; "    \
 384                 "for distro_bootpart in ${devplist}; do "       \
 385                         "if fstype ${devtype} "                 \
 386                                 "${devnum}:${distro_bootpart} " \
 387                                 "bootfstype; then "             \
 388                                 "run scan_dev_for_boot; "       \
 389                         "fi; "                                  \
 390                 "done\0"                                        \
 391         "boot_a_script="                                        \
 392                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 393                         "${scriptaddr} ${prefix}${script}; "    \
 394                 "env exists secureboot && load ${devtype} "     \
 395                         "${devnum}:${distro_bootpart} "         \
 396                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 397                         "&& esbc_validate ${scripthdraddr};"    \
 398                 "source ${scriptaddr}\0"                        \
 399         "nor_bootcmd=echo Trying load from nor..;"              \
 400                 "cp.b $kernel_addr $load_addr "                 \
 401                 "$kernel_size ; env exists secureboot && "      \
 402                 "cp.b $kernelheader_addr $kernelheader_addr_r " \
 403                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 404                 "bootm $load_addr#$BOARD\0"     \
 405         "sd_bootcmd=echo Trying load from SD ..;" \
 406         "mmcinfo; mmc read $load_addr "         \
 407         "$kernel_addr_sd $kernel_size_sd && "   \
 408         "bootm $load_addr#$BOARD\0"
 409 #elif defined(CONFIG_SD_BOOT)
 410 #define CONFIG_EXTRA_ENV_SETTINGS               \
 411         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 412         "loadaddr=0x90100000\0"                 \
 413         "kernel_addr=0x800\0"                \
 414         "ramdisk_addr=0x800000\0"               \
 415         "ramdisk_size=0x2000000\0"              \
 416         "fdt_high=0xa0000000\0"                 \
 417         "initrd_high=0xffffffffffffffff\0"      \
 418         "kernel_start=0x8000\0"              \
 419         "kernel_load=0xa0000000\0"              \
 420         "kernel_size=0x14000\0"               \
 421         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
 422         "mmc read 0x80100000 0x7000 0x800;" \
 423         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 424         "mcmemsize=0x70000000 \0"
 425 #else
 426 #define CONFIG_EXTRA_ENV_SETTINGS               \
 427         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 428         "loadaddr=0x80100000\0"                 \
 429         "kernel_addr=0x100000\0"                \
 430         "ramdisk_addr=0x800000\0"               \
 431         "ramdisk_size=0x2000000\0"              \
 432         "fdt_high=0xa0000000\0"                 \
 433         "initrd_high=0xffffffffffffffff\0"      \
 434         "kernel_start=0x581000000\0"            \
 435         "kernel_load=0xa0000000\0"              \
 436         "kernel_size=0x2800000\0"               \
 437         "mcmemsize=0x40000000\0"                \
 438         "mcinitcmd=fsl_mc start mc 0x580a00000" \
 439         " 0x580e00000 \0"
 440 #endif /* CONFIG_TFABOOT */
 441 #endif /* CONFIG_NXP_ESBC */
 442
 443 #ifdef CONFIG_TFABOOT
 444 #define BOOT_TARGET_DEVICES(func) \
 445         func(USB, usb, 0) \
 446         func(MMC, mmc, 0) \
 447         func(SCSI, scsi, 0) \
 448         func(DHCP, dhcp, na)
 449 #include <config_distro_bootcmd.h>
 450
 451 #define SD_BOOTCOMMAND                                          \
 452                         "env exists mcinitcmd && env exists secureboot "\
 453                         "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
 454                         "&& esbc_validate $load_addr; "                 \
 455                         "env exists mcinitcmd && run mcinitcmd "        \
 456                         "&& mmc read 0x80d00000 0x6800 0x800 "          \
 457                         "&& fsl_mc lazyapply dpl 0x80d00000; "          \
 458                         "run distro_bootcmd;run sd_bootcmd; "           \
 459                         "env exists secureboot && esbc_halt;"
 460
 461 #define IFC_NOR_BOOTCOMMAND                                             \
 462                         "env exists mcinitcmd && env exists secureboot "\
 463                         "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
 464                         "&& fsl_mc lazyapply dpl 0x580d00000;"          \
 465                         "run distro_bootcmd;run nor_bootcmd; "          \
 466                         "env exists secureboot && esbc_halt;"
 467 #endif
 468
 469 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 470 #define CONFIG_FSL_MEMAC
 471 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 472 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 473 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 474 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 475
 476 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 477 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
 478 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 479 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
 480 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 481 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
 482 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 483 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
 484 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 485 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
 486 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 487 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
 488 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 489 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
 490 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 491 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 492
 493 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
 494
 495 #endif
 496
 497 #include <asm/fsl_secure_boot.h>
 498
 499 #endif /* __LS2_QDS_H */