include/configs/ls2080aqds.h

   1 /*
   2  * Copyright 2017 NXP
   3  * Copyright 2015 Freescale Semiconductor
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __LS2_QDS_H
   9 #define __LS2_QDS_H
  10
  11 #include "ls2080a_common.h"
  12
  13 #ifndef __ASSEMBLY__
  14 unsigned long get_board_sys_clk(void);
  15 unsigned long get_board_ddr_clk(void);
  16 #endif
  17
  18 #ifdef CONFIG_FSL_QSPI
  19 #undef CONFIG_CMD_IMLS
  20 #define CONFIG_QIXIS_I2C_ACCESS
  21 #define CONFIG_SYS_I2C_EARLY_INIT
  22 #define CONFIG_SYS_I2C_IFDR_DIV         0x7e
  23 #endif
  24
  25 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
  26 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
  27 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
  28 #define COUNTER_FREQUENCY_REAL          (CONFIG_SYS_CLK_FREQ/4)
  29
  30 #define CONFIG_DDR_SPD
  31 #define CONFIG_DDR_ECC
  32 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  33 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  34 #define SPD_EEPROM_ADDRESS1     0x51
  35 #define SPD_EEPROM_ADDRESS2     0x52
  36 #define SPD_EEPROM_ADDRESS3     0x53
  37 #define SPD_EEPROM_ADDRESS4     0x54
  38 #define SPD_EEPROM_ADDRESS5     0x55
  39 #define SPD_EEPROM_ADDRESS6     0x56    /* dummy address */
  40 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
  41 #define CONFIG_SYS_SPD_BUS_NUM  0       /* SPD on I2C bus 0 */
  42 #define CONFIG_DIMM_SLOTS_PER_CTLR              2
  43 #define CONFIG_CHIP_SELECTS_PER_CTRL            4
  44 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
  45 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR       1
  46 #endif
  47 #define CONFIG_FSL_DDR_BIST     /* enable built-in memory test */
  48
  49 /* SATA */
  50 #define CONFIG_LIBATA
  51 #define CONFIG_SCSI_AHCI
  52 #define CONFIG_SCSI_AHCI_PLAT
  53 #define CONFIG_SCSI
  54
  55 #define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
  56 #define CONFIG_SYS_SATA2                        AHCI_BASE_ADDR2
  57
  58 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  59 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  60 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  61                                                 CONFIG_SYS_SCSI_MAX_LUN)
  62
  63 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
  64
  65 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  66 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
  67 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
  68
  69 #define CONFIG_SYS_NOR0_CSPR                                    \
  70         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  71         CSPR_PORT_SIZE_16                                       | \
  72         CSPR_MSEL_NOR                                           | \
  73         CSPR_V)
  74 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  75         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  76         CSPR_PORT_SIZE_16                                       | \
  77         CSPR_MSEL_NOR                                           | \
  78         CSPR_V)
  79 #define CONFIG_SYS_NOR1_CSPR                                    \
  80         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
  81         CSPR_PORT_SIZE_16                                       | \
  82         CSPR_MSEL_NOR                                           | \
  83         CSPR_V)
  84 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
  85         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
  86         CSPR_PORT_SIZE_16                                       | \
  87         CSPR_MSEL_NOR                                           | \
  88         CSPR_V)
  89 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
  90 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
  91                                 FTIM0_NOR_TEADC(0x5) | \
  92                                 FTIM0_NOR_TEAHC(0x5))
  93 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
  94                                 FTIM1_NOR_TRAD_NOR(0x1a) |\
  95                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
  96 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
  97                                 FTIM2_NOR_TCH(0x4) | \
  98                                 FTIM2_NOR_TWPH(0x0E) | \
  99                                 FTIM2_NOR_TWP(0x1c))
 100 #define CONFIG_SYS_NOR_FTIM3    0x04000000
 101 #define CONFIG_SYS_IFC_CCR      0x01000000
 102
 103 #ifdef CONFIG_MTD_NOR_FLASH
 104 #define CONFIG_FLASH_CFI_DRIVER
 105 #define CONFIG_SYS_FLASH_CFI
 106 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 107 #define CONFIG_SYS_FLASH_QUIET_TEST
 108 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 109
 110 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 111 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 112 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 113 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 114
 115 #define CONFIG_SYS_FLASH_EMPTY_INFO
 116 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
 117                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
 118 #endif
 119
 120 #define CONFIG_NAND_FSL_IFC
 121 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 122 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 123
 124 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
 125 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 126                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 127                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 128                                 | CSPR_V)
 129 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 130
 131 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 132                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 133                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 134                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 135                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 136                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 137                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 138
 139 #define CONFIG_SYS_NAND_ONFI_DETECTION
 140
 141 /* ONFI NAND Flash mode0 Timing Params */
 142 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 143                                         FTIM0_NAND_TWP(0x18)   | \
 144                                         FTIM0_NAND_TWCHT(0x07) | \
 145                                         FTIM0_NAND_TWH(0x0a))
 146 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 147                                         FTIM1_NAND_TWBE(0x39)  | \
 148                                         FTIM1_NAND_TRR(0x0e)   | \
 149                                         FTIM1_NAND_TRP(0x18))
 150 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 151                                         FTIM2_NAND_TREH(0x0a) | \
 152                                         FTIM2_NAND_TWHRE(0x1e))
 153 #define CONFIG_SYS_NAND_FTIM3           0x0
 154
 155 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 156 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 157 #define CONFIG_MTD_NAND_VERIFY_WRITE
 158 #define CONFIG_CMD_NAND
 159
 160 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 161
 162 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 163 #define QIXIS_LBMAP_SWITCH              0x06
 164 #define QIXIS_LBMAP_MASK                0x0f
 165 #define QIXIS_LBMAP_SHIFT               0
 166 #define QIXIS_LBMAP_DFLTBANK            0x00
 167 #define QIXIS_LBMAP_ALTBANK             0x04
 168 #define QIXIS_LBMAP_NAND                0x09
 169 #define QIXIS_LBMAP_SD                  0x00
 170 #define QIXIS_LBMAP_QSPI                0x0f
 171 #define QIXIS_RST_CTL_RESET             0x31
 172 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 173 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 174 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 175 #define QIXIS_RCW_SRC_NAND              0x107
 176 #define QIXIS_RCW_SRC_SD                0x40
 177 #define QIXIS_RCW_SRC_QSPI              0x62
 178 #define QIXIS_RST_FORCE_MEM             0x01
 179
 180 #define CONFIG_SYS_CSPR3_EXT    (0x0)
 181 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 182                                 | CSPR_PORT_SIZE_8 \
 183                                 | CSPR_MSEL_GPCM \
 184                                 | CSPR_V)
 185 #define CONFIG_SYS_CSPR3_FINAL  (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 186                                 | CSPR_PORT_SIZE_8 \
 187                                 | CSPR_MSEL_GPCM \
 188                                 | CSPR_V)
 189
 190 #define CONFIG_SYS_AMASK3       IFC_AMASK(64*1024)
 191 #define CONFIG_SYS_CSOR3        CSOR_GPCM_ADM_SHIFT(12)
 192 /* QIXIS Timing parameters for IFC CS3 */
 193 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 194                                         FTIM0_GPCM_TEADC(0x0e) | \
 195                                         FTIM0_GPCM_TEAHC(0x0e))
 196 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 197                                         FTIM1_GPCM_TRAD(0x3f))
 198 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0xf) | \
 199                                         FTIM2_GPCM_TCH(0xf) | \
 200                                         FTIM2_GPCM_TWP(0x3E))
 201 #define CONFIG_SYS_CS3_FTIM3            0x0
 202
 203 #if defined(CONFIG_SPL)
 204 #if defined(CONFIG_NAND_BOOT)
 205 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 206 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR_EARLY
 207 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR0_CSPR
 208 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 209 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 210 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 211 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 212 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 213 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 214 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 215 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR_EARLY
 216 #define CONFIG_SYS_CSPR2_FINAL          CONFIG_SYS_NOR1_CSPR
 217 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK_EARLY
 218 #define CONFIG_SYS_AMASK2_FINAL         CONFIG_SYS_NOR_AMASK
 219 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 220 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 221 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 222 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 223 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 224 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 225 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 226 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 227 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 228 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 229 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 230 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 231 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 232
 233 #define CONFIG_ENV_IS_IN_NAND
 234 #define CONFIG_ENV_OFFSET               (896 * 1024)
 235 #define CONFIG_ENV_SECT_SIZE            0x20000
 236 #define CONFIG_ENV_SIZE                 0x2000
 237 #define CONFIG_SPL_PAD_TO               0x20000
 238 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 * 1024)
 239 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (640 * 1024)
 240 #elif defined(CONFIG_SD_BOOT)
 241 #define CONFIG_ENV_OFFSET               0x200000
 242 #define CONFIG_ENV_IS_IN_MMC
 243 #define CONFIG_SYS_MMC_ENV_DEV          0
 244 #define CONFIG_ENV_SIZE                 0x20000
 245 #endif
 246 #else
 247 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 248 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 249 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 250 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 251 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 252 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 253 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 254 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 255 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 256 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 257 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 258 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 259 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 260 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 261 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 262 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 263 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 264 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 265 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 266 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 267 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 268 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 269 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 270 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 271 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 272 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 273 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 274
 275 #ifndef CONFIG_QSPI_BOOT
 276 #define CONFIG_ENV_IS_IN_FLASH
 277 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x300000)
 278 #define CONFIG_ENV_SECT_SIZE            0x20000
 279 #define CONFIG_ENV_SIZE                 0x2000
 280 #endif
 281 #endif
 282
 283 /* Debug Server firmware */
 284 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 285 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL
 286
 287 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 288
 289 /*
 290  * I2C
 291  */
 292 #define I2C_MUX_PCA_ADDR                0x77
 293 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 294
 295 /* I2C bus multiplexer */
 296 #define I2C_MUX_CH_DEFAULT      0x8
 297
 298 /* SPI */
 299 #if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
 300 #define CONFIG_SPI_FLASH
 301
 302 #ifdef CONFIG_FSL_DSPI
 303 #define CONFIG_SPI_FLASH_STMICRO
 304 #define CONFIG_SPI_FLASH_SST
 305 #define CONFIG_SPI_FLASH_EON
 306 #endif
 307
 308 #ifdef CONFIG_FSL_QSPI
 309 #define CONFIG_SPI_FLASH_SPANSION
 310 #define FSL_QSPI_FLASH_SIZE             (1 << 26) /* 64MB */
 311 #define FSL_QSPI_FLASH_NUM              4
 312 #endif
 313 /*
 314  * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure.
 315  * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0
 316  * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1
 317  */
 318 #define FSL_QIXIS_BRDCFG9_QSPI          0x1
 319
 320 #endif
 321
 322 /*
 323  * MMC
 324  */
 325 #ifdef CONFIG_MMC
 326 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
 327         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 328 #endif
 329
 330 /*
 331  * RTC configuration
 332  */
 333 #define RTC
 334 #define CONFIG_RTC_DS3231               1
 335 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 336
 337 /* EEPROM */
 338 #define CONFIG_ID_EEPROM
 339 #define CONFIG_SYS_I2C_EEPROM_NXID
 340 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 341 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 342 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 343 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 344 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 345
 346 #define CONFIG_FSL_MEMAC
 347
 348 #ifdef CONFIG_PCI
 349 #define CONFIG_PCI_SCAN_SHOW
 350 #define CONFIG_CMD_PCI
 351 #endif
 352
 353 /*  MMC  */
 354 #ifdef CONFIG_MMC
 355 #define CONFIG_FSL_ESDHC
 356 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 357 #endif
 358
 359 /* Initial environment variables */
 360 #undef CONFIG_EXTRA_ENV_SETTINGS
 361 #ifdef CONFIG_SECURE_BOOT
 362 #define CONFIG_EXTRA_ENV_SETTINGS               \
 363         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 364         "loadaddr=0x80100000\0"                 \
 365         "kernel_addr=0x100000\0"                \
 366         "ramdisk_addr=0x800000\0"               \
 367         "ramdisk_size=0x2000000\0"              \
 368         "fdt_high=0xa0000000\0"                 \
 369         "initrd_high=0xffffffffffffffff\0"      \
 370         "kernel_start=0x581000000\0"            \
 371         "kernel_load=0xa0000000\0"              \
 372         "kernel_size=0x2800000\0"               \
 373         "mcmemsize=0x40000000\0"                \
 374         "mcinitcmd=esbc_validate 0x580700000;"  \
 375         "esbc_validate 0x580740000;"            \
 376         "fsl_mc start mc 0x580a00000"           \
 377         " 0x580e00000 \0"
 378 #elif defined(CONFIG_SD_BOOT)
 379 #define CONFIG_EXTRA_ENV_SETTINGS               \
 380         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 381         "loadaddr=0x90100000\0"                 \
 382         "kernel_addr=0x800\0"                \
 383         "ramdisk_addr=0x800000\0"               \
 384         "ramdisk_size=0x2000000\0"              \
 385         "fdt_high=0xa0000000\0"                 \
 386         "initrd_high=0xffffffffffffffff\0"      \
 387         "kernel_start=0x8000\0"              \
 388         "kernel_load=0xa0000000\0"              \
 389         "kernel_size=0x14000\0"               \
 390         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
 391         "mmc read 0x80100000 0x7000 0x800;" \
 392         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 393         "mcmemsize=0x70000000 \0"
 394 #else
 395 #define CONFIG_EXTRA_ENV_SETTINGS               \
 396         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 397         "loadaddr=0x80100000\0"                 \
 398         "kernel_addr=0x100000\0"                \
 399         "ramdisk_addr=0x800000\0"               \
 400         "ramdisk_size=0x2000000\0"              \
 401         "fdt_high=0xa0000000\0"                 \
 402         "initrd_high=0xffffffffffffffff\0"      \
 403         "kernel_start=0x581000000\0"            \
 404         "kernel_load=0xa0000000\0"              \
 405         "kernel_size=0x2800000\0"               \
 406         "mcmemsize=0x40000000\0"                \
 407         "mcinitcmd=fsl_mc start mc 0x580a00000" \
 408         " 0x580e00000 \0"
 409 #endif /* CONFIG_SECURE_BOOT */
 410
 411
 412 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 413 #define CONFIG_FSL_MEMAC
 414 #define CONFIG_PHYLIB
 415 #define CONFIG_PHYLIB_10G
 416 #define CONFIG_PHY_VITESSE
 417 #define CONFIG_PHY_REALTEK
 418 #define CONFIG_PHY_TERANETICS
 419 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 420 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 421 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 422 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 423
 424 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 425 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
 426 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 427 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
 428 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 429 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
 430 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 431 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
 432 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 433 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
 434 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 435 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
 436 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 437 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
 438 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 439 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 440
 441 #define CONFIG_MII              /* MII PHY management */
 442 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
 443 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 444
 445 #endif
 446
 447 /*
 448  * USB
 449  */
 450 #define CONFIG_HAS_FSL_XHCI_USB
 451 #define CONFIG_USB_XHCI_FSL
 452 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 453 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 454
 455 #include <asm/fsl_secure_boot.h>
 456
 457 #endif /* __LS2_QDS_H */