include/configs/ls2080aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017, 2019-2021 NXP
   4  * Copyright 2015 Freescale Semiconductor
   5  */
   6
   7 #ifndef __LS2_QDS_H
   8 #define __LS2_QDS_H
   9
  10 #include "ls2080a_common.h"
  11
  12 #ifdef CONFIG_FSL_QSPI
  13 #define CONFIG_QIXIS_I2C_ACCESS
  14 #define CONFIG_SYS_I2C_IFDR_DIV         0x7e
  15 #endif
  16
  17 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
  18 #define COUNTER_FREQUENCY_REAL          (get_board_sys_clk()/4)
  19
  20 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  21 #define SPD_EEPROM_ADDRESS1     0x51
  22 #define SPD_EEPROM_ADDRESS2     0x52
  23 #define SPD_EEPROM_ADDRESS3     0x53
  24 #define SPD_EEPROM_ADDRESS4     0x54
  25 #define SPD_EEPROM_ADDRESS5     0x55
  26 #define SPD_EEPROM_ADDRESS6     0x56    /* dummy address */
  27 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
  28 #define CONFIG_SYS_SPD_BUS_NUM  0       /* SPD on I2C bus 0 */
  29 #define CONFIG_DIMM_SLOTS_PER_CTLR              2
  30 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
  31 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR       1
  32 #endif
  33
  34 /* SATA */
  35
  36 #define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
  37 #define CONFIG_SYS_SATA2                        AHCI_BASE_ADDR2
  38
  39 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  40 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
  41 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
  42
  43 #define CONFIG_SYS_NOR0_CSPR                                    \
  44         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  45         CSPR_PORT_SIZE_16                                       | \
  46         CSPR_MSEL_NOR                                           | \
  47         CSPR_V)
  48 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  49         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  50         CSPR_PORT_SIZE_16                                       | \
  51         CSPR_MSEL_NOR                                           | \
  52         CSPR_V)
  53 #define CONFIG_SYS_NOR1_CSPR                                    \
  54         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
  55         CSPR_PORT_SIZE_16                                       | \
  56         CSPR_MSEL_NOR                                           | \
  57         CSPR_V)
  58 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
  59         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
  60         CSPR_PORT_SIZE_16                                       | \
  61         CSPR_MSEL_NOR                                           | \
  62         CSPR_V)
  63 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
  64 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
  65                                 FTIM0_NOR_TEADC(0x5) | \
  66                                 FTIM0_NOR_TEAHC(0x5))
  67 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
  68                                 FTIM1_NOR_TRAD_NOR(0x1a) |\
  69                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
  70 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
  71                                 FTIM2_NOR_TCH(0x4) | \
  72                                 FTIM2_NOR_TWPH(0x0E) | \
  73                                 FTIM2_NOR_TWP(0x1c))
  74 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  75 #define CONFIG_SYS_IFC_CCR      0x01000000
  76
  77 #ifdef CONFIG_MTD_NOR_FLASH
  78 #define CONFIG_SYS_FLASH_QUIET_TEST
  79 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  80
  81 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
  82 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
  83 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
  84
  85 #define CONFIG_SYS_FLASH_EMPTY_INFO
  86 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
  87                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
  88 #endif
  89
  90 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
  91 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
  92
  93 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
  94 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
  95                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
  96                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
  97                                 | CSPR_V)
  98 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
  99
 100 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 101                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 102                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 103                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 104                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 105                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 106                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 107
 108 /* ONFI NAND Flash mode0 Timing Params */
 109 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 110                                         FTIM0_NAND_TWP(0x18)   | \
 111                                         FTIM0_NAND_TWCHT(0x07) | \
 112                                         FTIM0_NAND_TWH(0x0a))
 113 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 114                                         FTIM1_NAND_TWBE(0x39)  | \
 115                                         FTIM1_NAND_TRR(0x0e)   | \
 116                                         FTIM1_NAND_TRP(0x18))
 117 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 118                                         FTIM2_NAND_TREH(0x0a) | \
 119                                         FTIM2_NAND_TWHRE(0x1e))
 120 #define CONFIG_SYS_NAND_FTIM3           0x0
 121
 122 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 123 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 124 #define CONFIG_MTD_NAND_VERIFY_WRITE
 125
 126 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 127 #define QIXIS_LBMAP_SWITCH              0x06
 128 #define QIXIS_LBMAP_MASK                0x0f
 129 #define QIXIS_LBMAP_SHIFT               0
 130 #define QIXIS_LBMAP_DFLTBANK            0x00
 131 #define QIXIS_LBMAP_ALTBANK             0x04
 132 #define QIXIS_LBMAP_NAND                0x09
 133 #define QIXIS_LBMAP_SD                  0x00
 134 #define QIXIS_LBMAP_QSPI                0x0f
 135 #define QIXIS_RST_CTL_RESET             0x31
 136 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 137 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 138 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 139 #define QIXIS_RCW_SRC_NAND              0x107
 140 #define QIXIS_RCW_SRC_SD                0x40
 141 #define QIXIS_RCW_SRC_QSPI              0x62
 142 #define QIXIS_RST_FORCE_MEM             0x01
 143
 144 #define CONFIG_SYS_CSPR3_EXT    (0x0)
 145 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 146                                 | CSPR_PORT_SIZE_8 \
 147                                 | CSPR_MSEL_GPCM \
 148                                 | CSPR_V)
 149 #define CONFIG_SYS_CSPR3_FINAL  (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 150                                 | CSPR_PORT_SIZE_8 \
 151                                 | CSPR_MSEL_GPCM \
 152                                 | CSPR_V)
 153
 154 #define CONFIG_SYS_AMASK3       IFC_AMASK(64*1024)
 155 #define CONFIG_SYS_CSOR3        CSOR_GPCM_ADM_SHIFT(12)
 156 /* QIXIS Timing parameters for IFC CS3 */
 157 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 158                                         FTIM0_GPCM_TEADC(0x0e) | \
 159                                         FTIM0_GPCM_TEAHC(0x0e))
 160 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 161                                         FTIM1_GPCM_TRAD(0x3f))
 162 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0xf) | \
 163                                         FTIM2_GPCM_TCH(0xf) | \
 164                                         FTIM2_GPCM_TWP(0x3E))
 165 #define CONFIG_SYS_CS3_FTIM3            0x0
 166
 167 #if defined(CONFIG_SPL)
 168 #if defined(CONFIG_NAND_BOOT)
 169 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 170 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR_EARLY
 171 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR0_CSPR
 172 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 173 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 174 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 175 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 176 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 177 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 178 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 179 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR_EARLY
 180 #define CONFIG_SYS_CSPR2_FINAL          CONFIG_SYS_NOR1_CSPR
 181 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK_EARLY
 182 #define CONFIG_SYS_AMASK2_FINAL         CONFIG_SYS_NOR_AMASK
 183 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 184 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 185 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 186 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 187 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 188 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 189 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 190 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 191 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 192 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 193 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 194 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 195 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 196
 197 #define CONFIG_SPL_PAD_TO               0x20000
 198 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (640 * 1024)
 199 #endif
 200 #else
 201 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 202 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 203 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 204 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 205 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 206 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 207 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 208 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 209 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 210 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 211 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 212 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 213 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 214 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 215 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 216 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 217 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 218 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 219 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 220 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 221 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 222 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 223 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 224 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 225 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 226 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 227 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 228 #endif
 229
 230 /* Debug Server firmware */
 231 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 232 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL
 233
 234 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 235
 236 /*
 237  * I2C
 238  */
 239 #define I2C_MUX_PCA_ADDR                0x77
 240 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 241
 242 /* I2C bus multiplexer */
 243 #define I2C_MUX_CH_DEFAULT      0x8
 244
 245 /* SPI */
 246
 247 /*
 248  * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure.
 249  * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0
 250  * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1
 251  */
 252 #define FSL_QIXIS_BRDCFG9_QSPI          0x1
 253
 254 /*
 255  * MMC
 256  */
 257 #ifdef CONFIG_MMC
 258 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
 259         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 260 #endif
 261
 262 /*
 263  * RTC configuration
 264  */
 265 #define RTC
 266 #define CONFIG_RTC_DS3231               1
 267 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 268
 269 /* EEPROM */
 270 #define CONFIG_SYS_I2C_EEPROM_NXID
 271 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 272
 273 #define CONFIG_FSL_MEMAC
 274
 275 #ifdef CONFIG_PCI
 276 #define CONFIG_PCI_SCAN_SHOW
 277 #endif
 278
 279 /* Initial environment variables */
 280 #undef CONFIG_EXTRA_ENV_SETTINGS
 281 #ifdef CONFIG_NXP_ESBC
 282 #define CONFIG_EXTRA_ENV_SETTINGS               \
 283         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 284         "loadaddr=0x80100000\0"                 \
 285         "kernel_addr=0x100000\0"                \
 286         "ramdisk_addr=0x800000\0"               \
 287         "ramdisk_size=0x2000000\0"              \
 288         "fdt_high=0xa0000000\0"                 \
 289         "initrd_high=0xffffffffffffffff\0"      \
 290         "kernel_start=0x581000000\0"            \
 291         "kernel_load=0xa0000000\0"              \
 292         "kernel_size=0x2800000\0"               \
 293         "mcmemsize=0x40000000\0"                \
 294         "mcinitcmd=esbc_validate 0x580640000;"  \
 295         "esbc_validate 0x580680000;"            \
 296         "fsl_mc start mc 0x580a00000"           \
 297         " 0x580e00000 \0"
 298 #else
 299 #ifdef CONFIG_TFABOOT
 300 #define SD_MC_INIT_CMD                          \
 301         "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;"  \
 302         "mmc read 0x80e00000 0x7000 0x800;" \
 303         "fsl_mc start mc 0x80a00000 0x80e00000\0"
 304 #define IFC_MC_INIT_CMD                         \
 305         "fsl_mc start mc 0x580a00000" \
 306         " 0x580e00000 \0"
 307 #define CONFIG_EXTRA_ENV_SETTINGS               \
 308         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 309         "loadaddr=0x80100000\0"                 \
 310         "loadaddr_sd=0x90100000\0"                 \
 311         "kernel_addr=0x581000000\0"                       \
 312         "kernel_addr_sd=0x8000\0"                \
 313         "ramdisk_addr=0x800000\0"               \
 314         "ramdisk_size=0x2000000\0"              \
 315         "fdt_high=0xa0000000\0"                 \
 316         "initrd_high=0xffffffffffffffff\0"      \
 317         "kernel_start=0x581000000\0"            \
 318         "kernel_start_sd=0x8000\0"              \
 319         "kernel_load=0xa0000000\0"              \
 320         "kernel_size=0x2800000\0"               \
 321         "kernel_size_sd=0x14000\0"               \
 322         "load_addr=0xa0000000\0"                            \
 323         "kernelheader_addr=0x580600000\0"       \
 324         "kernelheader_addr_r=0x80200000\0"      \
 325         "kernelheader_size=0x40000\0"           \
 326         "BOARD=ls2088aqds\0" \
 327         "mcmemsize=0x70000000 \0" \
 328         "scriptaddr=0x80000000\0"               \
 329         "scripthdraddr=0x80080000\0"            \
 330         IFC_MC_INIT_CMD                         \
 331         BOOTENV                                 \
 332         "boot_scripts=ls2088aqds_boot.scr\0"    \
 333         "boot_script_hdr=hdr_ls2088aqds_bs.out\0"       \
 334         "scan_dev_for_boot_part="               \
 335                 "part list ${devtype} ${devnum} devplist; "     \
 336                 "env exists devplist || setenv devplist 1; "    \
 337                 "for distro_bootpart in ${devplist}; do "       \
 338                         "if fstype ${devtype} "                 \
 339                                 "${devnum}:${distro_bootpart} " \
 340                                 "bootfstype; then "             \
 341                                 "run scan_dev_for_boot; "       \
 342                         "fi; "                                  \
 343                 "done\0"                                        \
 344         "boot_a_script="                                        \
 345                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 346                         "${scriptaddr} ${prefix}${script}; "    \
 347                 "env exists secureboot && load ${devtype} "     \
 348                         "${devnum}:${distro_bootpart} "         \
 349                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 350                         "&& esbc_validate ${scripthdraddr};"    \
 351                 "source ${scriptaddr}\0"                        \
 352         "nor_bootcmd=echo Trying load from nor..;"              \
 353                 "cp.b $kernel_addr $load_addr "                 \
 354                 "$kernel_size ; env exists secureboot && "      \
 355                 "cp.b $kernelheader_addr $kernelheader_addr_r " \
 356                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 357                 "bootm $load_addr#$BOARD\0"     \
 358         "sd_bootcmd=echo Trying load from SD ..;" \
 359         "mmcinfo; mmc read $load_addr "         \
 360         "$kernel_addr_sd $kernel_size_sd && "   \
 361         "bootm $load_addr#$BOARD\0"
 362 #elif defined(CONFIG_SD_BOOT)
 363 #define CONFIG_EXTRA_ENV_SETTINGS               \
 364         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 365         "loadaddr=0x90100000\0"                 \
 366         "kernel_addr=0x800\0"                \
 367         "ramdisk_addr=0x800000\0"               \
 368         "ramdisk_size=0x2000000\0"              \
 369         "fdt_high=0xa0000000\0"                 \
 370         "initrd_high=0xffffffffffffffff\0"      \
 371         "kernel_start=0x8000\0"              \
 372         "kernel_load=0xa0000000\0"              \
 373         "kernel_size=0x14000\0"               \
 374         "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;"  \
 375         "mmc read 0x80e00000 0x7000 0x800;" \
 376         "fsl_mc start mc 0x80a00000 0x80e00000\0"       \
 377         "mcmemsize=0x70000000 \0"
 378 #else
 379 #define CONFIG_EXTRA_ENV_SETTINGS               \
 380         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 381         "loadaddr=0x80100000\0"                 \
 382         "kernel_addr=0x100000\0"                \
 383         "ramdisk_addr=0x800000\0"               \
 384         "ramdisk_size=0x2000000\0"              \
 385         "fdt_high=0xa0000000\0"                 \
 386         "initrd_high=0xffffffffffffffff\0"      \
 387         "kernel_start=0x581000000\0"            \
 388         "kernel_load=0xa0000000\0"              \
 389         "kernel_size=0x2800000\0"               \
 390         "mcmemsize=0x40000000\0"                \
 391         "mcinitcmd=fsl_mc start mc 0x580a00000" \
 392         " 0x580e00000 \0"
 393 #endif /* CONFIG_TFABOOT */
 394 #endif /* CONFIG_NXP_ESBC */
 395
 396 #ifdef CONFIG_TFABOOT
 397 #define BOOT_TARGET_DEVICES(func) \
 398         func(USB, usb, 0) \
 399         func(MMC, mmc, 0) \
 400         func(SCSI, scsi, 0) \
 401         func(DHCP, dhcp, na)
 402 #include <config_distro_bootcmd.h>
 403
 404 #define SD_BOOTCOMMAND                                          \
 405                         "env exists mcinitcmd && env exists secureboot "\
 406                         "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
 407                         "&& esbc_validate $load_addr; "                 \
 408                         "env exists mcinitcmd && run mcinitcmd "        \
 409                         "&& mmc read 0x80d00000 0x6800 0x800 "          \
 410                         "&& fsl_mc lazyapply dpl 0x80d00000; "          \
 411                         "run distro_bootcmd;run sd_bootcmd; "           \
 412                         "env exists secureboot && esbc_halt;"
 413
 414 #define IFC_NOR_BOOTCOMMAND                                             \
 415                         "env exists mcinitcmd && env exists secureboot "\
 416                         "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
 417                         "&& fsl_mc lazyapply dpl 0x580d00000;"          \
 418                         "run distro_bootcmd;run nor_bootcmd; "          \
 419                         "env exists secureboot && esbc_halt;"
 420 #endif
 421
 422 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 423 #define CONFIG_FSL_MEMAC
 424 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 425 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 426 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 427 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 428
 429 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 430 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
 431 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 432 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
 433 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 434 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
 435 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 436 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
 437 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 438 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
 439 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 440 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
 441 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 442 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
 443 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 444 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 445
 446 #endif
 447
 448 #include <asm/fsl_secure_boot.h>
 449
 450 #endif /* __LS2_QDS_H */