include/configs/ls1088ardb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017, 2020 NXP
   4  */
   5
   6 #ifndef __LS1088A_RDB_H
   7 #define __LS1088A_RDB_H
   8
   9 #include "ls1088a_common.h"
  10
  11 #if defined(CONFIG_TFABOOT) || \
  12         defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
  13 #ifndef CONFIG_SPL_BUILD
  14 #define CONFIG_QIXIS_I2C_ACCESS
  15 #endif
  16 #define SYS_NO_FLASH
  17 #endif
  18
  19 #define CONFIG_SYS_CLK_FREQ             100000000
  20 #define CONFIG_DDR_CLK_FREQ             100000000
  21 #define COUNTER_FREQUENCY_REAL          25000000        /* 25MHz */
  22 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  23
  24 #define CONFIG_DDR_SPD
  25 #ifdef CONFIG_EMU
  26 #define CONFIG_SYS_FSL_DDR_EMU
  27 #define CONFIG_SYS_MXC_I2C1_SPEED       40000000
  28 #define CONFIG_SYS_MXC_I2C2_SPEED       40000000
  29 #else
  30 #define CONFIG_DDR_ECC
  31 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  32 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  33 #endif
  34 #define SPD_EEPROM_ADDRESS      0x51
  35 #define CONFIG_SYS_SPD_BUS_NUM  0       /* SPD on I2C bus 0 */
  36 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  37
  38
  39 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  40 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  41 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
  42 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64 * 1024 * 1024)
  43
  44 #define CONFIG_SYS_NOR0_CSPR                                    \
  45         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  46         CSPR_PORT_SIZE_16                                       | \
  47         CSPR_MSEL_NOR                                           | \
  48         CSPR_V)
  49 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  50         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  51         CSPR_PORT_SIZE_16                                       | \
  52         CSPR_MSEL_NOR                                           | \
  53         CSPR_V)
  54 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(6)
  55 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x1) | \
  56                                 FTIM0_NOR_TEADC(0x1) | \
  57                                 FTIM0_NOR_TEAHC(0x1))
  58 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1) | \
  59                                 FTIM1_NOR_TRAD_NOR(0x1))
  60 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x0) | \
  61                                 FTIM2_NOR_TCH(0x0) | \
  62                                 FTIM2_NOR_TWP(0x1))
  63 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  64 #define CONFIG_SYS_IFC_CCR      0x01000000
  65
  66 #ifndef SYS_NO_FLASH
  67 #define CONFIG_SYS_FLASH_QUIET_TEST
  68 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  69
  70 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
  71 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
  72 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
  73 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
  74
  75 #define CONFIG_SYS_FLASH_EMPTY_INFO
  76 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
  77 #endif
  78 #endif
  79
  80 #ifndef SPL_NO_IFC
  81 #define CONFIG_NAND_FSL_IFC
  82 #endif
  83
  84 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
  85 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
  86
  87 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
  88 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
  89                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
  90                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
  91                                 | CSPR_V)
  92 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
  93
  94 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
  95                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
  96                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
  97                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
  98                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
  99                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 100                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 101
 102 #define CONFIG_SYS_NAND_ONFI_DETECTION
 103
 104 /* ONFI NAND Flash mode0 Timing Params */
 105 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 106                                         FTIM0_NAND_TWP(0x18)   | \
 107                                         FTIM0_NAND_TWCHT(0x07) | \
 108                                         FTIM0_NAND_TWH(0x0a))
 109 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 110                                         FTIM1_NAND_TWBE(0x39)  | \
 111                                         FTIM1_NAND_TRR(0x0e)   | \
 112                                         FTIM1_NAND_TRP(0x18))
 113 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 114                                         FTIM2_NAND_TREH(0x0a) | \
 115                                         FTIM2_NAND_TWHRE(0x1e))
 116 #define CONFIG_SYS_NAND_FTIM3           0x0
 117
 118 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 119 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 120 #define CONFIG_MTD_NAND_VERIFY_WRITE
 121
 122 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 123
 124 #ifndef SPL_NO_QIXIS
 125 #define CONFIG_FSL_QIXIS
 126 #endif
 127
 128 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 129 #define QIXIS_BRDCFG4_OFFSET            0x54
 130 #define QIXIS_LBMAP_SWITCH              2
 131 #define QIXIS_QMAP_MASK                 0xe0
 132 #define QIXIS_QMAP_SHIFT                5
 133 #define QIXIS_LBMAP_MASK                0x1f
 134 #define QIXIS_LBMAP_SHIFT               5
 135 #define QIXIS_LBMAP_DFLTBANK            0x00
 136 #define QIXIS_LBMAP_ALTBANK             0x20
 137 #define QIXIS_LBMAP_SD                  0x00
 138 #define QIXIS_LBMAP_EMMC                0x00
 139 #define QIXIS_LBMAP_SD_QSPI             0x00
 140 #define QIXIS_LBMAP_QSPI                0x00
 141 #define QIXIS_RCW_SRC_SD                0x40
 142 #define QIXIS_RCW_SRC_EMMC              0x41
 143 #define QIXIS_RCW_SRC_QSPI              0x62
 144 #define QIXIS_RST_CTL_RESET             0x31
 145 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 146 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 147 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 148 #define QIXIS_RST_FORCE_MEM             0x01
 149
 150 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 151 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 152                                         | CSPR_PORT_SIZE_8 \
 153                                         | CSPR_MSEL_GPCM \
 154                                         | CSPR_V)
 155 #define SYS_FPGA_CSPR_FINAL     (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 156                                         | CSPR_PORT_SIZE_8 \
 157                                         | CSPR_MSEL_GPCM \
 158                                         | CSPR_V)
 159
 160 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64*1024)
 161 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(0)
 162 /* QIXIS Timing parameters*/
 163 #define SYS_FPGA_CS_FTIM0       (FTIM0_GPCM_TACSE(0x0e) | \
 164                                         FTIM0_GPCM_TEADC(0x0e) | \
 165                                         FTIM0_GPCM_TEAHC(0x0e))
 166 #define SYS_FPGA_CS_FTIM1       (FTIM1_GPCM_TACO(0xff) | \
 167                                         FTIM1_GPCM_TRAD(0x3f))
 168 #define SYS_FPGA_CS_FTIM2       (FTIM2_GPCM_TCS(0xf) | \
 169                                         FTIM2_GPCM_TCH(0xf) | \
 170                                         FTIM2_GPCM_TWP(0x3E))
 171 #define SYS_FPGA_CS_FTIM3       0x0
 172
 173 #if defined(CONFIG_TFABOOT) || \
 174         defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 175 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 176 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 177 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 178 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 179 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 180 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 181 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 182 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 183 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 184 #define CONFIG_SYS_CSPR2                CONFIG_SYS_FPGA_CSPR
 185 #define CONFIG_SYS_CSPR2_FINAL          SYS_FPGA_CSPR_FINAL
 186 #define CONFIG_SYS_AMASK2               CONFIG_SYS_FPGA_AMASK
 187 #define CONFIG_SYS_CSOR2                CONFIG_SYS_FPGA_CSOR
 188 #define CONFIG_SYS_CS2_FTIM0            SYS_FPGA_CS_FTIM0
 189 #define CONFIG_SYS_CS2_FTIM1            SYS_FPGA_CS_FTIM1
 190 #define CONFIG_SYS_CS2_FTIM2            SYS_FPGA_CS_FTIM2
 191 #define CONFIG_SYS_CS2_FTIM3            SYS_FPGA_CS_FTIM3
 192 #else
 193 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 194 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 195 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 196 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 197 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 198 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 199 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 200 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 201 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 202 #endif
 203
 204 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 205
 206 #define I2C_MUX_CH_VOL_MONITOR          0xA
 207 /* Voltage monitor on channel 2*/
 208 #define I2C_VOL_MONITOR_ADDR           0x63
 209 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 210 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 211 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 212 #define I2C_SVDD_MONITOR_ADDR           0x4F
 213
 214 #define CONFIG_VID_FLS_ENV              "ls1088ardb_vdd_mv"
 215 #define CONFIG_VID
 216
 217 /* The lowest and highest voltage allowed for LS1088ARDB */
 218 #define VDD_MV_MIN                      819
 219 #define VDD_MV_MAX                      1212
 220
 221 #define CONFIG_VOL_MONITOR_LTC3882_SET
 222 #define CONFIG_VOL_MONITOR_LTC3882_READ
 223
 224 /* PM Bus commands code for LTC3882*/
 225 #define PMBUS_CMD_PAGE                  0x0
 226 #define PMBUS_CMD_READ_VOUT             0x8B
 227 #define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
 228 #define PMBUS_CMD_VOUT_COMMAND          0x21
 229
 230 #define PWM_CHANNEL0                    0x0
 231
 232 /*
 233  * I2C bus multiplexer
 234  */
 235 #define I2C_MUX_PCA_ADDR_PRI            0x77
 236 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 237 #define I2C_RETIMER_ADDR                0x18
 238 #define I2C_MUX_CH_DEFAULT              0x8
 239 #define I2C_MUX_CH5                     0xD
 240
 241 #ifndef SPL_NO_RTC
 242 /*
 243 * RTC configuration
 244 */
 245 #define RTC
 246 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 247 #endif
 248
 249 /* EEPROM */
 250 #define CONFIG_ID_EEPROM
 251 #define CONFIG_SYS_I2C_EEPROM_NXID
 252 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 253 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 254 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 255 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 256 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 257
 258 #ifdef CONFIG_SPL_BUILD
 259 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 260 #else
 261 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 262 #endif
 263
 264 #define CONFIG_FSL_MEMAC
 265
 266 #ifndef SPL_NO_ENV
 267 /* Initial environment variables */
 268 #ifdef CONFIG_TFABOOT
 269 #define QSPI_MC_INIT_CMD                                \
 270         "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"    \
 271         "sf read 0x80100000 0xE00000 0x100000;"                         \
 272         "env exists secureboot && "                     \
 273         "sf read 0x80640000 0x640000 0x40000 && "       \
 274         "sf read 0x80680000 0x680000 0x40000 && "       \
 275         "esbc_validate 0x80640000 && "                  \
 276         "esbc_validate 0x80680000 ;"                    \
 277         "fsl_mc start mc 0x80000000 0x80100000\0"
 278 #define SD_MC_INIT_CMD                          \
 279         "mmcinfo;mmc read 0x80000000 0x5000 0x800;"             \
 280         "mmc read 0x80100000 0x7000 0x800;"                             \
 281         "env exists secureboot && "                     \
 282         "mmc read 0x80640000 0x3200 0x20 && "           \
 283         "mmc read 0x80680000 0x3400 0x20 && "           \
 284         "esbc_validate 0x80640000 && "                  \
 285         "esbc_validate 0x80680000 ;"                    \
 286         "fsl_mc start mc 0x80000000 0x80100000\0"
 287 #else
 288 #if defined(CONFIG_QSPI_BOOT)
 289 #define MC_INIT_CMD                             \
 290         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 291         "sf read 0x80100000 0xE00000 0x100000;"                         \
 292         "env exists secureboot && "                     \
 293         "sf read 0x80640000 0x640000 0x40000 && "       \
 294         "sf read 0x80680000 0x680000 0x40000 && "       \
 295         "esbc_validate 0x80640000 && "                  \
 296         "esbc_validate 0x80680000 ;"                    \
 297         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 298         "mcmemsize=0x70000000\0"
 299 #elif defined(CONFIG_SD_BOOT)
 300 #define MC_INIT_CMD                             \
 301         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"           \
 302         "mmc read 0x80100000 0x7000 0x800;"                             \
 303         "env exists secureboot && "                     \
 304         "mmc read 0x80640000 0x3200 0x20 && "           \
 305         "mmc read 0x80680000 0x3400 0x20 && "           \
 306         "esbc_validate 0x80640000 && "                  \
 307         "esbc_validate 0x80680000 ;"                    \
 308         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 309         "mcmemsize=0x70000000\0"
 310 #endif
 311 #endif /* CONFIG_TFABOOT */
 312
 313 #undef CONFIG_EXTRA_ENV_SETTINGS
 314 #ifdef CONFIG_TFABOOT
 315 #define CONFIG_EXTRA_ENV_SETTINGS               \
 316         "BOARD=ls1088ardb\0"                    \
 317         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 318         "ramdisk_addr=0x800000\0"               \
 319         "ramdisk_size=0x2000000\0"              \
 320         "fdt_high=0xa0000000\0"                 \
 321         "initrd_high=0xffffffffffffffff\0"      \
 322         "fdt_addr=0x64f00000\0"                 \
 323         "kernel_addr=0x1000000\0"               \
 324         "kernel_addr_sd=0x8000\0"               \
 325         "kernelhdr_addr_sd=0x3000\0"            \
 326         "kernel_start=0x580100000\0"            \
 327         "kernelheader_start=0x580600000\0"      \
 328         "scriptaddr=0x80000000\0"               \
 329         "scripthdraddr=0x80080000\0"            \
 330         "fdtheader_addr_r=0x80100000\0"         \
 331         "kernelheader_addr=0x600000\0"          \
 332         "kernelheader_addr_r=0x80200000\0"      \
 333         "kernel_addr_r=0x81000000\0"            \
 334         "kernelheader_size=0x40000\0"           \
 335         "fdt_addr_r=0x90000000\0"               \
 336         "load_addr=0xa0000000\0"                \
 337         "kernel_size=0x2800000\0"               \
 338         "kernel_size_sd=0x14000\0"              \
 339         "kernelhdr_size_sd=0x20\0"              \
 340         QSPI_MC_INIT_CMD                        \
 341         "mcmemsize=0x70000000\0"                \
 342         BOOTENV                                 \
 343         "boot_scripts=ls1088ardb_boot.scr\0"    \
 344         "boot_script_hdr=hdr_ls1088ardb_bs.out\0"       \
 345         "scan_dev_for_boot_part="               \
 346                 "part list ${devtype} ${devnum} devplist; "     \
 347                 "env exists devplist || setenv devplist 1; "    \
 348                 "for distro_bootpart in ${devplist}; do "       \
 349                         "if fstype ${devtype} "                 \
 350                                 "${devnum}:${distro_bootpart} " \
 351                                 "bootfstype; then "             \
 352                                 "run scan_dev_for_boot; "       \
 353                         "fi; "                                  \
 354                 "done\0"                                        \
 355         "boot_a_script="                                        \
 356                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 357                 "${scriptaddr} ${prefix}${script}; "            \
 358         "env exists secureboot && load ${devtype} "             \
 359                 "${devnum}:${distro_bootpart} "                 \
 360                 "${scripthdraddr} ${prefix}${boot_script_hdr}; "\
 361                 "env exists secureboot "                        \
 362                 "&& esbc_validate ${scripthdraddr};"            \
 363                 "source ${scriptaddr}\0"                        \
 364         "installer=load mmc 0:2 $load_addr "                    \
 365                 "/flex_installer_arm64.itb; "                   \
 366                 "env exists mcinitcmd && run mcinitcmd && "     \
 367                 "mmc read 0x80001000 0x6800 0x800;"             \
 368                 "fsl_mc lazyapply dpl 0x80001000;"                      \
 369                 "bootm $load_addr#ls1088ardb\0"                 \
 370         "qspi_bootcmd=echo Trying load from qspi..;"            \
 371                 "sf probe && sf read $load_addr "               \
 372                 "$kernel_addr $kernel_size ; env exists secureboot "    \
 373                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 374                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 375                 "bootm $load_addr#$BOARD\0"                     \
 376                 "sd_bootcmd=echo Trying load from sd card..;"           \
 377                 "mmcinfo; mmc read $load_addr "                 \
 378                 "$kernel_addr_sd $kernel_size_sd ;"             \
 379                 "env exists secureboot && mmc read $kernelheader_addr_r "\
 380                 "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
 381                 " && esbc_validate ${kernelheader_addr_r};"     \
 382                 "bootm $load_addr#$BOARD\0"
 383 #else
 384 #define CONFIG_EXTRA_ENV_SETTINGS               \
 385         "BOARD=ls1088ardb\0"                    \
 386         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 387         "ramdisk_addr=0x800000\0"               \
 388         "ramdisk_size=0x2000000\0"              \
 389         "fdt_high=0xa0000000\0"                 \
 390         "initrd_high=0xffffffffffffffff\0"      \
 391         "fdt_addr=0x64f00000\0"                 \
 392         "kernel_addr=0x1000000\0"               \
 393         "kernel_addr_sd=0x8000\0"               \
 394         "kernelhdr_addr_sd=0x3000\0"            \
 395         "kernel_start=0x580100000\0"            \
 396         "kernelheader_start=0x580800000\0"      \
 397         "scriptaddr=0x80000000\0"               \
 398         "scripthdraddr=0x80080000\0"            \
 399         "fdtheader_addr_r=0x80100000\0"         \
 400         "kernelheader_addr=0x600000\0"          \
 401         "kernelheader_addr_r=0x80200000\0"      \
 402         "kernel_addr_r=0x81000000\0"            \
 403         "kernelheader_size=0x40000\0"           \
 404         "fdt_addr_r=0x90000000\0"               \
 405         "load_addr=0xa0000000\0"                \
 406         "kernel_size=0x2800000\0"               \
 407         "kernel_size_sd=0x14000\0"              \
 408         "kernelhdr_size_sd=0x20\0"              \
 409         MC_INIT_CMD                             \
 410         BOOTENV                                 \
 411         "boot_scripts=ls1088ardb_boot.scr\0"    \
 412         "boot_script_hdr=hdr_ls1088ardb_bs.out\0"       \
 413         "scan_dev_for_boot_part="               \
 414                 "part list ${devtype} ${devnum} devplist; "     \
 415                 "env exists devplist || setenv devplist 1; "    \
 416                 "for distro_bootpart in ${devplist}; do "       \
 417                         "if fstype ${devtype} "                 \
 418                                 "${devnum}:${distro_bootpart} " \
 419                                 "bootfstype; then "             \
 420                                 "run scan_dev_for_boot; "       \
 421                         "fi; "                                  \
 422                 "done\0"                                        \
 423         "boot_a_script="                                        \
 424                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 425                 "${scriptaddr} ${prefix}${script}; "            \
 426         "env exists secureboot && load ${devtype} "             \
 427                 "${devnum}:${distro_bootpart} "                 \
 428                 "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 429                 "&& esbc_validate ${scripthdraddr};"            \
 430                 "source ${scriptaddr}\0"                        \
 431         "installer=load mmc 0:2 $load_addr "                    \
 432                 "/flex_installer_arm64.itb; "                   \
 433                 "env exists mcinitcmd && run mcinitcmd && "     \
 434                 "mmc read 0x80001000 0x6800 0x800;"             \
 435                 "fsl_mc lazyapply dpl 0x80001000;"                      \
 436                 "bootm $load_addr#ls1088ardb\0"                 \
 437         "qspi_bootcmd=echo Trying load from qspi..;"            \
 438                 "sf probe && sf read $load_addr "               \
 439                 "$kernel_addr $kernel_size ; env exists secureboot "    \
 440                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 441                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 442                 "bootm $load_addr#$BOARD\0"                     \
 443                 "sd_bootcmd=echo Trying load from sd card..;"           \
 444                 "mmcinfo; mmc read $load_addr "                 \
 445                 "$kernel_addr_sd $kernel_size_sd ;"             \
 446                 "env exists secureboot && mmc read $kernelheader_addr_r "\
 447                 "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
 448                 " && esbc_validate ${kernelheader_addr_r};"     \
 449                 "bootm $load_addr#$BOARD\0"
 450 #endif /* CONFIG_TFABOOT */
 451
 452 #undef CONFIG_BOOTCOMMAND
 453 #ifdef CONFIG_TFABOOT
 454 #define QSPI_NOR_BOOTCOMMAND                                    \
 455         "sf read 0x80001000 0xd00000 0x100000;"         \
 456                 "env exists mcinitcmd && env exists secureboot "        \
 457                 " && sf read 0x806C0000 0x6C0000 0x100000 "     \
 458                 "&& esbc_validate 0x806C0000;env exists mcinitcmd "     \
 459                 "&& fsl_mc lazyapply dpl 0x80001000;"           \
 460                 "run distro_bootcmd;run qspi_bootcmd;"          \
 461                 "env exists secureboot && esbc_halt;"
 462 #define SD_BOOTCOMMAND                                          \
 463                 "env exists mcinitcmd && mmcinfo; "             \
 464                 "mmc read 0x80001000 0x6800 0x800; "            \
 465                 "env exists mcinitcmd && env exists secureboot "        \
 466                 " && mmc read 0x806C0000 0x3600 0x20 "          \
 467                 "&& esbc_validate 0x806C0000;env exists mcinitcmd "     \
 468                 "&& fsl_mc lazyapply dpl 0x80001000;"           \
 469                 "run distro_bootcmd;run sd_bootcmd;"            \
 470                 "env exists secureboot && esbc_halt;"
 471 #else
 472 #if defined(CONFIG_QSPI_BOOT)
 473 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
 474 #define CONFIG_BOOTCOMMAND                                      \
 475                 "sf read 0x80001000 0xd00000 0x100000;"         \
 476                 "env exists mcinitcmd && env exists secureboot "        \
 477                 " && sf read 0x806C0000 0x6C0000 0x100000 "     \
 478                 "&& esbc_validate 0x806C0000;env exists mcinitcmd "     \
 479                 "&& fsl_mc lazyapply dpl 0x80001000;"           \
 480                 "run distro_bootcmd;run qspi_bootcmd;"          \
 481                 "env exists secureboot && esbc_halt;"
 482
 483 /* Try to boot an on-SD kernel first, then do normal distro boot */
 484 #elif defined(CONFIG_SD_BOOT)
 485 #define CONFIG_BOOTCOMMAND                                      \
 486                 "env exists mcinitcmd && mmcinfo; "             \
 487                 "mmc read 0x80001000 0x6800 0x800; "            \
 488                 "env exists mcinitcmd && env exists secureboot "        \
 489                 " && mmc read 0x806C0000 0x3600 0x20 "          \
 490                 "&& esbc_validate 0x806C0000;env exists mcinitcmd "     \
 491                 "&& fsl_mc lazyapply dpl 0x80001000;"           \
 492                 "run distro_bootcmd;run sd_bootcmd;"            \
 493                 "env exists secureboot && esbc_halt;"
 494 #endif
 495 #endif /* CONFIG_TFABOOT */
 496
 497 /* MAC/PHY configuration */
 498 #ifdef CONFIG_FSL_MC_ENET
 499 #define AQ_PHY_ADDR1                    0x00
 500 #define AQR105_IRQ_MASK                 0x00000004
 501
 502 #define QSGMII1_PORT1_PHY_ADDR          0x0c
 503 #define QSGMII1_PORT2_PHY_ADDR          0x0d
 504 #define QSGMII1_PORT3_PHY_ADDR          0x0e
 505 #define QSGMII1_PORT4_PHY_ADDR          0x0f
 506 #define QSGMII2_PORT1_PHY_ADDR          0x1c
 507 #define QSGMII2_PORT2_PHY_ADDR          0x1d
 508 #define QSGMII2_PORT3_PHY_ADDR          0x1e
 509 #define QSGMII2_PORT4_PHY_ADDR          0x1f
 510
 511 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
 512 #define CONFIG_PHY_GIGE
 513 #endif
 514 #endif
 515
 516 /*  MMC  */
 517 #ifdef CONFIG_MMC
 518 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 519 #endif
 520
 521 #ifndef SPL_NO_ENV
 522
 523 #define BOOT_TARGET_DEVICES(func) \
 524         func(MMC, mmc, 0) \
 525         func(USB, usb, 0) \
 526         func(SCSI, scsi, 0) \
 527         func(DHCP, dhcp, na)
 528 #include <config_distro_bootcmd.h>
 529 #endif
 530
 531 #include <asm/fsl_secure_boot.h>
 532
 533 #endif /* __LS1088A_RDB_H */