Merge git://git.denx.de/u-boot-spi
[platform/kernel/u-boot.git] / include / configs / ls1088aqds.h
1 /*
2  * Copyright 2017 NXP
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __LS1088A_QDS_H
8 #define __LS1088A_QDS_H
9
10 #include "ls1088a_common.h"
11
12
13 #define CONFIG_DISPLAY_BOARDINFO_LATE
14
15
16 #ifndef __ASSEMBLY__
17 unsigned long get_board_sys_clk(void);
18 unsigned long get_board_ddr_clk(void);
19 #endif
20
21
22 #if defined(CONFIG_QSPI_BOOT)
23 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
24 #define CONFIG_ENV_OFFSET               0x300000        /* 3MB */
25 #define CONFIG_ENV_SECT_SIZE            0x40000
26 #elif defined(CONFIG_SD_BOOT)
27 #define CONFIG_ENV_OFFSET               (3 * 1024 * 1024)
28 #define CONFIG_SYS_MMC_ENV_DEV          0
29 #define CONFIG_ENV_SIZE                 0x2000
30 #else
31 #define CONFIG_ENV_IS_IN_FLASH
32 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x300000)
33 #define CONFIG_ENV_SECT_SIZE            0x20000
34 #define CONFIG_ENV_SIZE                 0x20000
35 #endif
36
37 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
38 #define CONFIG_QIXIS_I2C_ACCESS
39 #define SYS_NO_FLASH
40
41 #undef CONFIG_CMD_IMLS
42 #define CONFIG_SYS_CLK_FREQ             100000000
43 #define CONFIG_DDR_CLK_FREQ             100000000
44 #else
45 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
46 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
47 #endif
48
49 #define COUNTER_FREQUENCY_REAL          (CONFIG_SYS_CLK_FREQ/4)
50 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
51
52 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
53
54 #define CONFIG_DDR_SPD
55 #define CONFIG_DDR_ECC
56 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
57 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
58 #define SPD_EEPROM_ADDRESS              0x51
59 #define CONFIG_SYS_SPD_BUS_NUM          0
60
61
62 /*
63  * IFC Definitions
64  */
65 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
66 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
67 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
68 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
69
70 #define CONFIG_SYS_NOR0_CSPR                                    \
71         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
72         CSPR_PORT_SIZE_16                                       | \
73         CSPR_MSEL_NOR                                           | \
74         CSPR_V)
75 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
76         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
77         CSPR_PORT_SIZE_16                                       | \
78         CSPR_MSEL_NOR                                           | \
79         CSPR_V)
80 #define CONFIG_SYS_NOR1_CSPR                                    \
81         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
82         CSPR_PORT_SIZE_16                                       | \
83         CSPR_MSEL_NOR                                           | \
84         CSPR_V)
85 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
86         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
87         CSPR_PORT_SIZE_16                                       | \
88         CSPR_MSEL_NOR                                           | \
89         CSPR_V)
90 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
91 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
92                                 FTIM0_NOR_TEADC(0x5) | \
93                                 FTIM0_NOR_TEAHC(0x5))
94 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
95                                 FTIM1_NOR_TRAD_NOR(0x1a) |\
96                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
97 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
98                                 FTIM2_NOR_TCH(0x4) | \
99                                 FTIM2_NOR_TWPH(0x0E) | \
100                                 FTIM2_NOR_TWP(0x1c))
101 #define CONFIG_SYS_NOR_FTIM3    0x04000000
102 #define CONFIG_SYS_IFC_CCR      0x01000000
103
104 #ifndef SYS_NO_FLASH
105 #define CONFIG_FLASH_CFI_DRIVER
106 #define CONFIG_SYS_FLASH_CFI
107 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
108 #define CONFIG_SYS_FLASH_QUIET_TEST
109 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
110
111 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
112 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
113 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
114 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
115
116 #define CONFIG_SYS_FLASH_EMPTY_INFO
117 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
118                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
119 #endif
120 #endif
121
122 #define CONFIG_NAND_FSL_IFC
123 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
124 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
125
126 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
127 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
128                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
129                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
130                                 | CSPR_V)
131 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
132
133 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
134                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
135                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
136                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
137                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
138                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
139                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
140
141 #define CONFIG_SYS_NAND_ONFI_DETECTION
142
143 /* ONFI NAND Flash mode0 Timing Params */
144 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
145                                         FTIM0_NAND_TWP(0x18)   | \
146                                         FTIM0_NAND_TWCHT(0x07) | \
147                                         FTIM0_NAND_TWH(0x0a))
148 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
149                                         FTIM1_NAND_TWBE(0x39)  | \
150                                         FTIM1_NAND_TRR(0x0e)   | \
151                                         FTIM1_NAND_TRP(0x18))
152 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
153                                         FTIM2_NAND_TREH(0x0a) | \
154                                         FTIM2_NAND_TWHRE(0x1e))
155 #define CONFIG_SYS_NAND_FTIM3           0x0
156
157 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
158 #define CONFIG_SYS_MAX_NAND_DEVICE      1
159 #define CONFIG_MTD_NAND_VERIFY_WRITE
160 #define CONFIG_CMD_NAND
161
162 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
163
164 #define CONFIG_FSL_QIXIS
165 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
166 #define QIXIS_LBMAP_SWITCH              6
167 #define QIXIS_QMAP_MASK                 0xe0
168 #define QIXIS_QMAP_SHIFT                5
169 #define QIXIS_LBMAP_MASK                0x0f
170 #define QIXIS_LBMAP_SHIFT               0
171 #define QIXIS_LBMAP_DFLTBANK            0x0e
172 #define QIXIS_LBMAP_ALTBANK             0x2e
173 #define QIXIS_LBMAP_SD                  0x00
174 #define QIXIS_LBMAP_SD_QSPI             0x0e
175 #define QIXIS_LBMAP_QSPI                0x0e
176 #define QIXIS_RCW_SRC_SD                0x40
177 #define QIXIS_RCW_SRC_QSPI              0x62
178 #define QIXIS_RST_CTL_RESET             0x41
179 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
180 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
181 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
182 #define QIXIS_RST_FORCE_MEM             0x01
183 #define QIXIS_STAT_PRES1                0xb
184 #define QIXIS_SDID_MASK                 0x07
185 #define QIXIS_ESDHC_NO_ADAPTER          0x7
186
187 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
188 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
189                                         | CSPR_PORT_SIZE_8 \
190                                         | CSPR_MSEL_GPCM \
191                                         | CSPR_V)
192 #define SYS_FPGA_CSPR_FINAL     (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
193                                         | CSPR_PORT_SIZE_8 \
194                                         | CSPR_MSEL_GPCM \
195                                         | CSPR_V)
196
197 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64*1024)
198 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
199 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(0)
200 #else
201 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(12)
202 #endif
203 /* QIXIS Timing parameters*/
204 #define SYS_FPGA_CS_FTIM0       (FTIM0_GPCM_TACSE(0x0e) | \
205                                         FTIM0_GPCM_TEADC(0x0e) | \
206                                         FTIM0_GPCM_TEAHC(0x0e))
207 #define SYS_FPGA_CS_FTIM1       (FTIM1_GPCM_TACO(0xff) | \
208                                         FTIM1_GPCM_TRAD(0x3f))
209 #define SYS_FPGA_CS_FTIM2       (FTIM2_GPCM_TCS(0xf) | \
210                                         FTIM2_GPCM_TCH(0xf) | \
211                                         FTIM2_GPCM_TWP(0x3E))
212 #define SYS_FPGA_CS_FTIM3       0x0
213
214 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
215 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
216 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
217 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
218 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
219 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
220 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
221 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
222 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
223 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_FPGA_CSPR_EXT
224 #define CONFIG_SYS_CSPR2                CONFIG_SYS_FPGA_CSPR
225 #define CONFIG_SYS_CSPR2_FINAL          SYS_FPGA_CSPR_FINAL
226 #define CONFIG_SYS_AMASK2               CONFIG_SYS_FPGA_AMASK
227 #define CONFIG_SYS_CSOR2                CONFIG_SYS_FPGA_CSOR
228 #define CONFIG_SYS_CS2_FTIM0            SYS_FPGA_CS_FTIM0
229 #define CONFIG_SYS_CS2_FTIM1            SYS_FPGA_CS_FTIM1
230 #define CONFIG_SYS_CS2_FTIM2            SYS_FPGA_CS_FTIM2
231 #define CONFIG_SYS_CS2_FTIM3            SYS_FPGA_CS_FTIM3
232 #else
233 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
234 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
235 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
236 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
237 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
238 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
239 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
240 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
241 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
242 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
243 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
244 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
245 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
246 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
247 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
248 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
249 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
250 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
251 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
252 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
253 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
254 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
255 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
256 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
257 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
258 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
259 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
260 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
261 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
262 #define CONFIG_SYS_CSPR3_FINAL          CONFIG_SYS_FPGA_CSPR_FINAL
263 #define CONFIG_SYS_AMASK3               CONFIG_SYS_FPGA_AMASK
264 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
265 #define CONFIG_SYS_CS3_FTIM0            CONFIG_SYS_FPGA_CS_FTIM0
266 #define CONFIG_SYS_CS3_FTIM1            CONFIG_SYS_FPGA_CS_FTIM1
267 #define CONFIG_SYS_CS3_FTIM2            CONFIG_SYS_FPGA_CS_FTIM2
268 #define CONFIG_SYS_CS3_FTIM3            CONFIG_SYS_FPGA_CS_FTIM3
269 #endif
270
271 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
272
273 /*
274  * I2C bus multiplexer
275  */
276 #define I2C_MUX_PCA_ADDR_PRI            0x77
277 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
278 #define I2C_RETIMER_ADDR                0x18
279 #define I2C_RETIMER_ADDR2               0x19
280 #define I2C_MUX_CH_DEFAULT              0x8
281 #define I2C_MUX_CH5                     0xD
282
283 /*
284 * RTC configuration
285 */
286 #define RTC
287 #define CONFIG_RTC_PCF8563 1
288 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
289 #define CONFIG_CMD_DATE
290
291 /* EEPROM */
292 #define CONFIG_ID_EEPROM
293 #define CONFIG_SYS_I2C_EEPROM_NXID
294 #define CONFIG_SYS_EEPROM_BUS_NUM               0
295 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
296 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
297 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
298 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
299
300 /* QSPI device */
301 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
302 #define CONFIG_FSL_QSPI
303 #define FSL_QSPI_FLASH_SIZE             (1 << 26)
304 #define FSL_QSPI_FLASH_NUM              2
305
306 #endif
307
308 #ifdef CONFIG_FSL_DSPI
309 #define CONFIG_SPI_FLASH_STMICRO
310 #define CONFIG_SPI_FLASH_SST
311 #define CONFIG_SPI_FLASH_EON
312 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
313 #define CONFIG_SF_DEFAULT_BUS           1
314 #define CONFIG_SF_DEFAULT_CS            0
315 #endif
316 #endif
317
318 #define CONFIG_CMD_MEMINFO
319 #define CONFIG_CMD_MEMTEST
320 #define CONFIG_SYS_MEMTEST_START        0x80000000
321 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
322
323 #ifdef CONFIG_SPL_BUILD
324 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
325 #else
326 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
327 #endif
328
329 #define CONFIG_FSL_MEMAC
330
331 /*  MMC  */
332 #define CONFIG_FSL_ESDHC
333 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
334 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
335         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
336
337 /* Initial environment variables */
338 #ifdef CONFIG_SECURE_BOOT
339 #undef CONFIG_EXTRA_ENV_SETTINGS
340 #define CONFIG_EXTRA_ENV_SETTINGS               \
341         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
342         "loadaddr=0x90100000\0"                 \
343         "kernel_addr=0x100000\0"                \
344         "ramdisk_addr=0x800000\0"               \
345         "ramdisk_size=0x2000000\0"              \
346         "fdt_high=0xa0000000\0"                 \
347         "initrd_high=0xffffffffffffffff\0"      \
348         "kernel_start=0x1000000\0"              \
349         "kernel_load=0xa0000000\0"              \
350         "kernel_size=0x2800000\0"               \
351         "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;"  \
352         "sf read 0xa0700000 0x700000 0x4000; esbc_validate 0xa0700000;" \
353         "sf read 0xa0e00000 0xe00000 0x100000;" \
354         "sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;"  \
355         "fsl_mc start mc 0xa0a00000 0xa0e00000\0"                       \
356         "mcmemsize=0x70000000 \0"
357 #else /* if !(CONFIG_SECURE_BOOT) */
358 #if defined(CONFIG_QSPI_BOOT)
359 #undef CONFIG_EXTRA_ENV_SETTINGS
360 #define CONFIG_EXTRA_ENV_SETTINGS               \
361         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
362         "loadaddr=0x90100000\0"                 \
363         "kernel_addr=0x100000\0"                \
364         "ramdisk_addr=0x800000\0"               \
365         "ramdisk_size=0x2000000\0"              \
366         "fdt_high=0xa0000000\0"                 \
367         "initrd_high=0xffffffffffffffff\0"      \
368         "kernel_start=0x1000000\0"              \
369         "kernel_load=0xa0000000\0"              \
370         "kernel_size=0x2800000\0"               \
371         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
372         "sf read 0x80100000 0xE00000 0x100000;" \
373         "fsl_mc start mc 0x80000000 0x80100000\0"       \
374         "mcmemsize=0x70000000 \0"
375 #elif defined(CONFIG_SD_BOOT)
376 #undef CONFIG_EXTRA_ENV_SETTINGS
377 #define CONFIG_EXTRA_ENV_SETTINGS               \
378         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
379         "loadaddr=0x90100000\0"                 \
380         "kernel_addr=0x800\0"                \
381         "ramdisk_addr=0x800000\0"               \
382         "ramdisk_size=0x2000000\0"              \
383         "fdt_high=0xa0000000\0"                 \
384         "initrd_high=0xffffffffffffffff\0"      \
385         "kernel_start=0x8000\0"              \
386         "kernel_load=0xa0000000\0"              \
387         "kernel_size=0x14000\0"               \
388         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
389         "mmc read 0x80100000 0x7000 0x800;" \
390         "fsl_mc start mc 0x80000000 0x80100000\0"       \
391         "mcmemsize=0x70000000 \0"
392 #else   /* NOR BOOT */
393 #undef CONFIG_EXTRA_ENV_SETTINGS
394 #define CONFIG_EXTRA_ENV_SETTINGS               \
395         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
396         "loadaddr=0x90100000\0"                 \
397         "kernel_addr=0x100000\0"                \
398         "ramdisk_addr=0x800000\0"               \
399         "ramdisk_size=0x2000000\0"              \
400         "fdt_high=0xa0000000\0"                 \
401         "initrd_high=0xffffffffffffffff\0"      \
402         "kernel_start=0x1000000\0"              \
403         "kernel_load=0xa0000000\0"              \
404         "kernel_size=0x2800000\0"               \
405         "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0"   \
406         "mcmemsize=0x70000000 \0"
407 #endif
408 #endif /* CONFIG_SECURE_BOOT */
409
410 #ifdef CONFIG_FSL_MC_ENET
411 #define CONFIG_FSL_MEMAC
412 #define CONFIG_PHYLIB
413 #define CONFIG_PHYLIB_10G
414 #define CONFIG_PHY_VITESSE
415 #define CONFIG_PHY_REALTEK
416 #define CONFIG_PHY_TERANETICS
417 #define RGMII_PHY1_ADDR         0x1
418 #define RGMII_PHY2_ADDR         0x2
419 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
420 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
421 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
422 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
423
424 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
425 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
426 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
427 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
428 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
429 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
430 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
431 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
432 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
433 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
434 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
435 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
436 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
437 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
438 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
439 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
440
441 #define CONFIG_MII              /* MII PHY management */
442 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
443 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
444
445 #endif
446
447 #undef CONFIG_CMDLINE_EDITING
448 #include <config_distro_defaults.h>
449 #define BOOT_TARGET_DEVICES(func) \
450         func(USB, usb, 0) \
451         func(MMC, mmc, 0) \
452         func(SCSI, scsi, 0) \
453         func(DHCP, dhcp, na)
454 #include <config_distro_bootcmd.h>
455
456 #include <asm/fsl_secure_boot.h>
457
458 #endif /* __LS1088A_QDS_H */