include/configs/ls1088aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017, 2020 NXP
   4  */
   5
   6 #ifndef __LS1088A_QDS_H
   7 #define __LS1088A_QDS_H
   8
   9 #include "ls1088a_common.h"
  10
  11
  12 #ifndef __ASSEMBLY__
  13 unsigned long get_board_sys_clk(void);
  14 unsigned long get_board_ddr_clk(void);
  15 #endif
  16
  17 #ifdef CONFIG_TFABOOT
  18 #define CONFIG_MISC_INIT_R
  19 #endif
  20
  21 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
  22 #define CONFIG_QIXIS_I2C_ACCESS
  23 #define SYS_NO_FLASH
  24
  25 #define CONFIG_SYS_CLK_FREQ             100000000
  26 #define CONFIG_DDR_CLK_FREQ             100000000
  27 #else
  28 #define CONFIG_QIXIS_I2C_ACCESS
  29 #if !CONFIG_IS_ENABLED(DM_I2C)
  30 #define CONFIG_SYS_I2C_EARLY_INIT
  31 #endif
  32 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
  33 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
  34 #endif
  35
  36 #define COUNTER_FREQUENCY_REAL          (CONFIG_SYS_CLK_FREQ/4)
  37 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  38
  39 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  40
  41 #define CONFIG_DDR_SPD
  42 #define CONFIG_DDR_ECC
  43 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  44 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  45 #define SPD_EEPROM_ADDRESS              0x51
  46 #define CONFIG_SYS_SPD_BUS_NUM          0
  47
  48
  49 /*
  50  * IFC Definitions
  51  */
  52 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  53 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  54 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
  55 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
  56
  57 #define CONFIG_SYS_NOR0_CSPR                                    \
  58         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  59         CSPR_PORT_SIZE_16                                       | \
  60         CSPR_MSEL_NOR                                           | \
  61         CSPR_V)
  62 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  63         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  64         CSPR_PORT_SIZE_16                                       | \
  65         CSPR_MSEL_NOR                                           | \
  66         CSPR_V)
  67 #define CONFIG_SYS_NOR1_CSPR                                    \
  68         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
  69         CSPR_PORT_SIZE_16                                       | \
  70         CSPR_MSEL_NOR                                           | \
  71         CSPR_V)
  72 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
  73         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
  74         CSPR_PORT_SIZE_16                                       | \
  75         CSPR_MSEL_NOR                                           | \
  76         CSPR_V)
  77 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
  78 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
  79                                 FTIM0_NOR_TEADC(0x5) | \
  80                                 FTIM0_NOR_TAVDS(0x6) | \
  81                                 FTIM0_NOR_TEAHC(0x5))
  82 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
  83                                 FTIM1_NOR_TRAD_NOR(0x1a) | \
  84                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
  85 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x8) | \
  86                                 FTIM2_NOR_TCH(0x8) | \
  87                                 FTIM2_NOR_TWPH(0xe) | \
  88                                 FTIM2_NOR_TWP(0x1c))
  89 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  90 #define CONFIG_SYS_IFC_CCR      0x01000000
  91
  92 #ifndef SYS_NO_FLASH
  93 #define CONFIG_SYS_FLASH_QUIET_TEST
  94 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  95
  96 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
  97 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
  98 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
  99 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 100
 101 #define CONFIG_SYS_FLASH_EMPTY_INFO
 102 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
 103                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
 104 #endif
 105 #endif
 106
 107 #define CONFIG_NAND_FSL_IFC
 108 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 109 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 110
 111 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
 112 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 113                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 114                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 115                                 | CSPR_V)
 116 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 117
 118 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 119                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 120                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 121                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 122                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 123                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 124                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 125
 126 #define CONFIG_SYS_NAND_ONFI_DETECTION
 127
 128 /* ONFI NAND Flash mode0 Timing Params */
 129 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 130                                         FTIM0_NAND_TWP(0x18)   | \
 131                                         FTIM0_NAND_TWCHT(0x07) | \
 132                                         FTIM0_NAND_TWH(0x0a))
 133 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 134                                         FTIM1_NAND_TWBE(0x39)  | \
 135                                         FTIM1_NAND_TRR(0x0e)   | \
 136                                         FTIM1_NAND_TRP(0x18))
 137 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 138                                         FTIM2_NAND_TREH(0x0a) | \
 139                                         FTIM2_NAND_TWHRE(0x1e))
 140 #define CONFIG_SYS_NAND_FTIM3           0x0
 141
 142 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 143 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 144 #define CONFIG_MTD_NAND_VERIFY_WRITE
 145
 146 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 147
 148 #define CONFIG_FSL_QIXIS
 149 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 150 #define QIXIS_LBMAP_SWITCH              6
 151 #define QIXIS_QMAP_MASK                 0xe0
 152 #define QIXIS_QMAP_SHIFT                5
 153 #define QIXIS_LBMAP_MASK                0x0f
 154 #define QIXIS_LBMAP_SHIFT               0
 155 #define QIXIS_LBMAP_DFLTBANK            0x0e
 156 #define QIXIS_LBMAP_ALTBANK             0x2e
 157 #define QIXIS_LBMAP_SD                  0x00
 158 #define QIXIS_LBMAP_EMMC                0x00
 159 #define QIXIS_LBMAP_IFC                 0x00
 160 #define QIXIS_LBMAP_SD_QSPI             0x0e
 161 #define QIXIS_LBMAP_QSPI                0x0e
 162 #define QIXIS_RCW_SRC_IFC               0x25
 163 #define QIXIS_RCW_SRC_SD                0x40
 164 #define QIXIS_RCW_SRC_EMMC              0x41
 165 #define QIXIS_RCW_SRC_QSPI              0x62
 166 #define QIXIS_RST_CTL_RESET             0x41
 167 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 168 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 169 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 170 #define QIXIS_RST_FORCE_MEM             0x01
 171 #define QIXIS_STAT_PRES1                0xb
 172 #define QIXIS_SDID_MASK                 0x07
 173 #define QIXIS_ESDHC_NO_ADAPTER          0x7
 174
 175 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 176 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 177                                         | CSPR_PORT_SIZE_8 \
 178                                         | CSPR_MSEL_GPCM \
 179                                         | CSPR_V)
 180 #define SYS_FPGA_CSPR_FINAL     (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 181                                         | CSPR_PORT_SIZE_8 \
 182                                         | CSPR_MSEL_GPCM \
 183                                         | CSPR_V)
 184
 185 #define SYS_FPGA_AMASK          IFC_AMASK(64 * 1024)
 186 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 187 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(0)
 188 #else
 189 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(12)
 190 #endif
 191 /* QIXIS Timing parameters*/
 192 #define SYS_FPGA_CS_FTIM0       (FTIM0_GPCM_TACSE(0x0e) | \
 193                                         FTIM0_GPCM_TEADC(0x0e) | \
 194                                         FTIM0_GPCM_TEAHC(0x0e))
 195 #define SYS_FPGA_CS_FTIM1       (FTIM1_GPCM_TACO(0xff) | \
 196                                         FTIM1_GPCM_TRAD(0x3f))
 197 #define SYS_FPGA_CS_FTIM2       (FTIM2_GPCM_TCS(0xf) | \
 198                                         FTIM2_GPCM_TCH(0xf) | \
 199                                         FTIM2_GPCM_TWP(0x3E))
 200 #define SYS_FPGA_CS_FTIM3       0x0
 201
 202 #ifdef CONFIG_TFABOOT
 203 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 204 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 205 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 206 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 207 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 208 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 209 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 210 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 211 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 212 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 213 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 214 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 215 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 216 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 217 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 218 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 219 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 220 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 221 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 222 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 223 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 224 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 225 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 226 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 227 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 228 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 229 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 230 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 231 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 232 #define CONFIG_SYS_CSPR3_FINAL          SYS_FPGA_CSPR_FINAL
 233 #define CONFIG_SYS_AMASK3               SYS_FPGA_AMASK
 234 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 235 #define CONFIG_SYS_CS3_FTIM0            SYS_FPGA_CS_FTIM0
 236 #define CONFIG_SYS_CS3_FTIM1            SYS_FPGA_CS_FTIM1
 237 #define CONFIG_SYS_CS3_FTIM2            SYS_FPGA_CS_FTIM2
 238 #define CONFIG_SYS_CS3_FTIM3            SYS_FPGA_CS_FTIM3
 239 #else
 240 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 241 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 242 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 243 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 244 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 245 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 246 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 247 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 248 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 249 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 250 #define CONFIG_SYS_CSPR2                CONFIG_SYS_FPGA_CSPR
 251 #define CONFIG_SYS_CSPR2_FINAL          SYS_FPGA_CSPR_FINAL
 252 #define CONFIG_SYS_AMASK2               SYS_FPGA_AMASK
 253 #define CONFIG_SYS_CSOR2                CONFIG_SYS_FPGA_CSOR
 254 #define CONFIG_SYS_CS2_FTIM0            SYS_FPGA_CS_FTIM0
 255 #define CONFIG_SYS_CS2_FTIM1            SYS_FPGA_CS_FTIM1
 256 #define CONFIG_SYS_CS2_FTIM2            SYS_FPGA_CS_FTIM2
 257 #define CONFIG_SYS_CS2_FTIM3            SYS_FPGA_CS_FTIM3
 258 #else
 259 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 260 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 261 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 262 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 263 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 264 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 265 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 266 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 267 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 268 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 269 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 270 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 271 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 272 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 273 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 274 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 275 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 276 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 277 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 278 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 279 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 280 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 281 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 282 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 283 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 284 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 285 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 286 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 287 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 288 #define CONFIG_SYS_CSPR3_FINAL          SYS_FPGA_CSPR_FINAL
 289 #define CONFIG_SYS_AMASK3               SYS_FPGA_AMASK
 290 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 291 #define CONFIG_SYS_CS3_FTIM0            SYS_FPGA_CS_FTIM0
 292 #define CONFIG_SYS_CS3_FTIM1            SYS_FPGA_CS_FTIM1
 293 #define CONFIG_SYS_CS3_FTIM2            SYS_FPGA_CS_FTIM2
 294 #define CONFIG_SYS_CS3_FTIM3            SYS_FPGA_CS_FTIM3
 295 #endif
 296 #endif
 297
 298 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 299
 300 /*
 301  * I2C bus multiplexer
 302  */
 303 #define I2C_MUX_PCA_ADDR_PRI            0x77
 304 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 305 #define I2C_RETIMER_ADDR                0x18
 306 #define I2C_RETIMER_ADDR2               0x19
 307 #define I2C_MUX_CH_DEFAULT              0x8
 308 #define I2C_MUX_CH5                     0xD
 309
 310 #define I2C_MUX_CH_VOL_MONITOR          0xA
 311
 312 /* Voltage monitor on channel 2*/
 313 #define I2C_VOL_MONITOR_ADDR           0x63
 314 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 315 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 316 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 317 #define I2C_SVDD_MONITOR_ADDR           0x4F
 318
 319 #define CONFIG_VID_FLS_ENV              "ls1088aqds_vdd_mv"
 320 #define CONFIG_VID
 321
 322 /* The lowest and highest voltage allowed for LS1088AQDS */
 323 #define VDD_MV_MIN                      819
 324 #define VDD_MV_MAX                      1212
 325
 326 #define CONFIG_VOL_MONITOR_LTC3882_SET
 327 #define CONFIG_VOL_MONITOR_LTC3882_READ
 328
 329 #define PWM_CHANNEL0                    0x0
 330
 331 /*
 332 * RTC configuration
 333 */
 334 #define RTC
 335 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 336
 337 /* EEPROM */
 338 #define CONFIG_ID_EEPROM
 339 #define CONFIG_SYS_I2C_EEPROM_NXID
 340 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 341 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 342 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 343 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 344 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 345
 346 #ifdef CONFIG_FSL_DSPI
 347 #define CONFIG_SPI_FLASH_STMICRO
 348 #define CONFIG_SPI_FLASH_SST
 349 #define CONFIG_SPI_FLASH_EON
 350 #if !defined(CONFIG_TFABOOT) && \
 351         !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 352 #endif
 353 #endif
 354
 355 #ifdef CONFIG_SPL_BUILD
 356 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 357 #else
 358 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 359 #endif
 360
 361 #define CONFIG_FSL_MEMAC
 362
 363 /*  MMC  */
 364 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 365 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
 366         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 367
 368 #define COMMON_ENV \
 369         "kernelheader_addr_r=0x80200000\0"      \
 370         "fdtheader_addr_r=0x80100000\0"         \
 371         "kernel_addr_r=0x81000000\0"            \
 372         "fdt_addr_r=0x90000000\0"               \
 373         "load_addr=0xa0000000\0"
 374
 375 /* Initial environment variables */
 376 #ifdef CONFIG_NXP_ESBC
 377 #undef CONFIG_EXTRA_ENV_SETTINGS
 378 #define CONFIG_EXTRA_ENV_SETTINGS               \
 379         COMMON_ENV                              \
 380         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 381         "loadaddr=0x90100000\0"                 \
 382         "kernel_addr=0x100000\0"                \
 383         "ramdisk_addr=0x800000\0"               \
 384         "ramdisk_size=0x2000000\0"              \
 385         "fdt_high=0xa0000000\0"                 \
 386         "initrd_high=0xffffffffffffffff\0"      \
 387         "kernel_start=0x1000000\0"              \
 388         "kernel_load=0xa0000000\0"              \
 389         "kernel_size=0x2800000\0"               \
 390         "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;"  \
 391         "sf read 0xa0640000 0x640000 0x4000; esbc_validate 0xa0640000;" \
 392         "sf read 0xa0e00000 0xe00000 0x100000;" \
 393         "sf read 0xa0680000 0x680000 0x4000;esbc_validate 0xa0680000;"  \
 394         "fsl_mc start mc 0xa0a00000 0xa0e00000\0"                       \
 395         "mcmemsize=0x70000000 \0"
 396 #else /* if !(CONFIG_NXP_ESBC) */
 397 #ifdef CONFIG_TFABOOT
 398 #define QSPI_MC_INIT_CMD                                \
 399         "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"    \
 400         "sf read 0x80100000 0xE00000 0x100000;" \
 401         "fsl_mc start mc 0x80000000 0x80100000\0"
 402 #define SD_MC_INIT_CMD                          \
 403         "mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
 404         "mmc read 0x80100000 0x7000 0x800;" \
 405         "fsl_mc start mc 0x80000000 0x80100000\0"
 406 #define IFC_MC_INIT_CMD                         \
 407         "fsl_mc start mc 0x580A00000 0x580E00000\0"
 408
 409 #undef CONFIG_EXTRA_ENV_SETTINGS
 410 #define CONFIG_EXTRA_ENV_SETTINGS               \
 411         COMMON_ENV                              \
 412         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 413         "loadaddr=0x90100000\0"                 \
 414         "kernel_addr=0x100000\0"                \
 415         "kernel_addr_sd=0x800\0"                \
 416         "ramdisk_addr=0x800000\0"               \
 417         "ramdisk_size=0x2000000\0"              \
 418         "fdt_high=0xa0000000\0"                 \
 419         "initrd_high=0xffffffffffffffff\0"      \
 420         "kernel_start=0x1000000\0"              \
 421         "kernel_start_sd=0x8000\0"              \
 422         "kernel_load=0xa0000000\0"              \
 423         "kernel_size=0x2800000\0"               \
 424         "kernel_size_sd=0x14000\0"               \
 425         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 426         "sf read 0x80100000 0xE00000 0x100000;" \
 427         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 428         "mcmemsize=0x70000000 \0"               \
 429         "BOARD=ls1088aqds\0" \
 430         "scriptaddr=0x80000000\0"               \
 431         "scripthdraddr=0x80080000\0"            \
 432         BOOTENV                                 \
 433         "boot_scripts=ls1088aqds_boot.scr\0"    \
 434         "boot_script_hdr=hdr_ls1088aqds_bs.out\0"       \
 435         "scan_dev_for_boot_part="               \
 436                 "part list ${devtype} ${devnum} devplist; "     \
 437                 "env exists devplist || setenv devplist 1; "    \
 438                 "for distro_bootpart in ${devplist}; do "       \
 439                         "if fstype ${devtype} "                 \
 440                                 "${devnum}:${distro_bootpart} " \
 441                                 "bootfstype; then "             \
 442                                 "run scan_dev_for_boot; "       \
 443                         "fi; "                                  \
 444                 "done\0"                                        \
 445         "boot_a_script="                                        \
 446                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 447                 "${scriptaddr} ${prefix}${script}; "            \
 448         "env exists secureboot && load ${devtype} "             \
 449                 "${devnum}:${distro_bootpart} "                 \
 450                 "${scripthdraddr} ${prefix}${boot_script_hdr}; "\
 451                 "env exists secureboot "                        \
 452                 "&& esbc_validate ${scripthdraddr};"            \
 453                 "source ${scriptaddr}\0"                        \
 454         "qspi_bootcmd=echo Trying load from qspi..; " \
 455                 "sf probe 0:0; " \
 456                 "sf read 0x80001000 0xd00000 0x100000; " \
 457                 "fsl_mc lazyapply dpl 0x80001000 && " \
 458                 "sf read $kernel_load $kernel_start " \
 459                 "$kernel_size && bootm $kernel_load#$BOARD\0" \
 460         "sd_bootcmd=echo Trying load from sd card..; " \
 461                 "mmcinfo;mmc read 0x80001000 0x6800 0x800; "\
 462                 "fsl_mc lazyapply dpl 0x80001000 && " \
 463                 "mmc read $kernel_load $kernel_start_sd " \
 464                 "$kernel_size_sd && bootm $kernel_load#$BOARD\0" \
 465         "nor_bootcmd=echo Trying load from nor..; " \
 466                 "fsl_mc lazyapply dpl 0x580d00000 && " \
 467                 "cp.b $kernel_start $kernel_load " \
 468                 "$kernel_size && bootm $kernel_load#$BOARD\0"
 469 #else
 470 #if defined(CONFIG_QSPI_BOOT)
 471 #undef CONFIG_EXTRA_ENV_SETTINGS
 472 #define CONFIG_EXTRA_ENV_SETTINGS               \
 473         COMMON_ENV                              \
 474         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 475         "loadaddr=0x90100000\0"                 \
 476         "kernel_addr=0x100000\0"                \
 477         "ramdisk_addr=0x800000\0"               \
 478         "ramdisk_size=0x2000000\0"              \
 479         "fdt_high=0xa0000000\0"                 \
 480         "initrd_high=0xffffffffffffffff\0"      \
 481         "kernel_start=0x1000000\0"              \
 482         "kernel_load=0xa0000000\0"              \
 483         "kernel_size=0x2800000\0"               \
 484         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 485         "sf read 0x80100000 0xE00000 0x100000;" \
 486         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 487         "mcmemsize=0x70000000 \0"
 488 #elif defined(CONFIG_SD_BOOT)
 489 #undef CONFIG_EXTRA_ENV_SETTINGS
 490 #define CONFIG_EXTRA_ENV_SETTINGS               \
 491         COMMON_ENV                              \
 492         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 493         "loadaddr=0x90100000\0"                 \
 494         "kernel_addr=0x800\0"                \
 495         "ramdisk_addr=0x800000\0"               \
 496         "ramdisk_size=0x2000000\0"              \
 497         "fdt_high=0xa0000000\0"                 \
 498         "initrd_high=0xffffffffffffffff\0"      \
 499         "kernel_start=0x8000\0"              \
 500         "kernel_load=0xa0000000\0"              \
 501         "kernel_size=0x14000\0"               \
 502         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
 503         "mmc read 0x80100000 0x7000 0x800;" \
 504         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 505         "mcmemsize=0x70000000 \0"
 506 #else   /* NOR BOOT */
 507 #undef CONFIG_EXTRA_ENV_SETTINGS
 508 #define CONFIG_EXTRA_ENV_SETTINGS               \
 509         COMMON_ENV                              \
 510         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 511         "loadaddr=0x90100000\0"                 \
 512         "kernel_addr=0x100000\0"                \
 513         "ramdisk_addr=0x800000\0"               \
 514         "ramdisk_size=0x2000000\0"              \
 515         "fdt_high=0xa0000000\0"                 \
 516         "initrd_high=0xffffffffffffffff\0"      \
 517         "kernel_start=0x1000000\0"              \
 518         "kernel_load=0xa0000000\0"              \
 519         "kernel_size=0x2800000\0"               \
 520         "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0"   \
 521         "mcmemsize=0x70000000 \0"
 522 #endif
 523 #endif /* CONFIG_TFABOOT */
 524 #endif /* CONFIG_NXP_ESBC */
 525
 526 #ifdef CONFIG_TFABOOT
 527 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "   \
 528                            "env exists secureboot && esbc_halt;;"
 529 #define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "     \
 530                            "env exists secureboot && esbc_halt;;"
 531 #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "   \
 532                            "env exists secureboot && esbc_halt;;"
 533 #endif
 534
 535 #ifdef CONFIG_FSL_MC_ENET
 536 #define CONFIG_FSL_MEMAC
 537 #define RGMII_PHY1_ADDR         0x1
 538 #define RGMII_PHY2_ADDR         0x2
 539 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 540 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 541 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 542 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 543
 544 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 545 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
 546 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 547 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
 548 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 549 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
 550 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 551 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
 552 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 553 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
 554 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 555 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
 556 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 557 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
 558 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 559 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 560
 561 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
 562 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 563
 564 #endif
 565
 566 #define BOOT_TARGET_DEVICES(func) \
 567         func(USB, usb, 0) \
 568         func(MMC, mmc, 0) \
 569         func(SCSI, scsi, 0) \
 570         func(DHCP, dhcp, na)
 571 #include <config_distro_bootcmd.h>
 572
 573 #include <asm/fsl_secure_boot.h>
 574
 575 #endif /* __LS1088A_QDS_H */