include/configs/ls1088aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017 NXP
   4  */
   5
   6 #ifndef __LS1088A_QDS_H
   7 #define __LS1088A_QDS_H
   8
   9 #include "ls1088a_common.h"
  10
  11
  12 #ifndef __ASSEMBLY__
  13 unsigned long get_board_sys_clk(void);
  14 unsigned long get_board_ddr_clk(void);
  15 #endif
  16
  17
  18 #if defined(CONFIG_QSPI_BOOT)
  19 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  20 #define CONFIG_ENV_SECT_SIZE            0x40000
  21 #elif defined(CONFIG_SD_BOOT)
  22 #define CONFIG_ENV_OFFSET               (3 * 1024 * 1024)
  23 #define CONFIG_SYS_MMC_ENV_DEV          0
  24 #define CONFIG_ENV_SIZE                 0x2000
  25 #else
  26 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x300000)
  27 #define CONFIG_ENV_SECT_SIZE            0x20000
  28 #define CONFIG_ENV_SIZE                 0x20000
  29 #endif
  30
  31 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
  32 #define CONFIG_QIXIS_I2C_ACCESS
  33 #define SYS_NO_FLASH
  34
  35 #undef CONFIG_CMD_IMLS
  36 #define CONFIG_SYS_CLK_FREQ             100000000
  37 #define CONFIG_DDR_CLK_FREQ             100000000
  38 #else
  39 #define CONFIG_QIXIS_I2C_ACCESS
  40 #define CONFIG_SYS_I2C_EARLY_INIT
  41 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
  42 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
  43 #endif
  44
  45 #define COUNTER_FREQUENCY_REAL          (CONFIG_SYS_CLK_FREQ/4)
  46 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  47
  48 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  49
  50 #define CONFIG_DDR_SPD
  51 #define CONFIG_DDR_ECC
  52 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  53 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  54 #define SPD_EEPROM_ADDRESS              0x51
  55 #define CONFIG_SYS_SPD_BUS_NUM          0
  56
  57
  58 /*
  59  * IFC Definitions
  60  */
  61 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  62 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  63 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
  64 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
  65
  66 #define CONFIG_SYS_NOR0_CSPR                                    \
  67         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  68         CSPR_PORT_SIZE_16                                       | \
  69         CSPR_MSEL_NOR                                           | \
  70         CSPR_V)
  71 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  72         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  73         CSPR_PORT_SIZE_16                                       | \
  74         CSPR_MSEL_NOR                                           | \
  75         CSPR_V)
  76 #define CONFIG_SYS_NOR1_CSPR                                    \
  77         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
  78         CSPR_PORT_SIZE_16                                       | \
  79         CSPR_MSEL_NOR                                           | \
  80         CSPR_V)
  81 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
  82         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
  83         CSPR_PORT_SIZE_16                                       | \
  84         CSPR_MSEL_NOR                                           | \
  85         CSPR_V)
  86 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
  87 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
  88                                 FTIM0_NOR_TEADC(0x5) | \
  89                                 FTIM0_NOR_TAVDS(0x6) | \
  90                                 FTIM0_NOR_TEAHC(0x5))
  91 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
  92                                 FTIM1_NOR_TRAD_NOR(0x1a) | \
  93                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
  94 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x8) | \
  95                                 FTIM2_NOR_TCH(0x8) | \
  96                                 FTIM2_NOR_TWPH(0xe) | \
  97                                 FTIM2_NOR_TWP(0x1c))
  98 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  99 #define CONFIG_SYS_IFC_CCR      0x01000000
 100
 101 #ifndef SYS_NO_FLASH
 102 #define CONFIG_SYS_FLASH_QUIET_TEST
 103 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 104
 105 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 106 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 107 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 108 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 109
 110 #define CONFIG_SYS_FLASH_EMPTY_INFO
 111 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
 112                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
 113 #endif
 114 #endif
 115
 116 #define CONFIG_NAND_FSL_IFC
 117 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 118 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 119
 120 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
 121 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 122                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 123                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 124                                 | CSPR_V)
 125 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 126
 127 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 128                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 129                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 130                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 131                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 132                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 133                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 134
 135 #define CONFIG_SYS_NAND_ONFI_DETECTION
 136
 137 /* ONFI NAND Flash mode0 Timing Params */
 138 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 139                                         FTIM0_NAND_TWP(0x18)   | \
 140                                         FTIM0_NAND_TWCHT(0x07) | \
 141                                         FTIM0_NAND_TWH(0x0a))
 142 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 143                                         FTIM1_NAND_TWBE(0x39)  | \
 144                                         FTIM1_NAND_TRR(0x0e)   | \
 145                                         FTIM1_NAND_TRP(0x18))
 146 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 147                                         FTIM2_NAND_TREH(0x0a) | \
 148                                         FTIM2_NAND_TWHRE(0x1e))
 149 #define CONFIG_SYS_NAND_FTIM3           0x0
 150
 151 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 152 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 153 #define CONFIG_MTD_NAND_VERIFY_WRITE
 154 #define CONFIG_CMD_NAND
 155
 156 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 157
 158 #define CONFIG_FSL_QIXIS
 159 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 160 #define QIXIS_LBMAP_SWITCH              6
 161 #define QIXIS_QMAP_MASK                 0xe0
 162 #define QIXIS_QMAP_SHIFT                5
 163 #define QIXIS_LBMAP_MASK                0x0f
 164 #define QIXIS_LBMAP_SHIFT               0
 165 #define QIXIS_LBMAP_DFLTBANK            0x0e
 166 #define QIXIS_LBMAP_ALTBANK             0x2e
 167 #define QIXIS_LBMAP_SD                  0x00
 168 #define QIXIS_LBMAP_EMMC                0x00
 169 #define QIXIS_LBMAP_IFC                 0x00
 170 #define QIXIS_LBMAP_SD_QSPI             0x0e
 171 #define QIXIS_LBMAP_QSPI                0x0e
 172 #define QIXIS_RCW_SRC_IFC               0x25
 173 #define QIXIS_RCW_SRC_SD                0x40
 174 #define QIXIS_RCW_SRC_EMMC              0x41
 175 #define QIXIS_RCW_SRC_QSPI              0x62
 176 #define QIXIS_RST_CTL_RESET             0x41
 177 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 178 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 179 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 180 #define QIXIS_RST_FORCE_MEM             0x01
 181 #define QIXIS_STAT_PRES1                0xb
 182 #define QIXIS_SDID_MASK                 0x07
 183 #define QIXIS_ESDHC_NO_ADAPTER          0x7
 184
 185 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 186 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 187                                         | CSPR_PORT_SIZE_8 \
 188                                         | CSPR_MSEL_GPCM \
 189                                         | CSPR_V)
 190 #define SYS_FPGA_CSPR_FINAL     (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 191                                         | CSPR_PORT_SIZE_8 \
 192                                         | CSPR_MSEL_GPCM \
 193                                         | CSPR_V)
 194
 195 #define SYS_FPGA_AMASK          IFC_AMASK(64 * 1024)
 196 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 197 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(0)
 198 #else
 199 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(12)
 200 #endif
 201 /* QIXIS Timing parameters*/
 202 #define SYS_FPGA_CS_FTIM0       (FTIM0_GPCM_TACSE(0x0e) | \
 203                                         FTIM0_GPCM_TEADC(0x0e) | \
 204                                         FTIM0_GPCM_TEAHC(0x0e))
 205 #define SYS_FPGA_CS_FTIM1       (FTIM1_GPCM_TACO(0xff) | \
 206                                         FTIM1_GPCM_TRAD(0x3f))
 207 #define SYS_FPGA_CS_FTIM2       (FTIM2_GPCM_TCS(0xf) | \
 208                                         FTIM2_GPCM_TCH(0xf) | \
 209                                         FTIM2_GPCM_TWP(0x3E))
 210 #define SYS_FPGA_CS_FTIM3       0x0
 211
 212 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 213 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 214 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 215 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 216 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 217 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 218 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 219 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 220 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 221 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 222 #define CONFIG_SYS_CSPR2                CONFIG_SYS_FPGA_CSPR
 223 #define CONFIG_SYS_CSPR2_FINAL          SYS_FPGA_CSPR_FINAL
 224 #define CONFIG_SYS_AMASK2               SYS_FPGA_AMASK
 225 #define CONFIG_SYS_CSOR2                CONFIG_SYS_FPGA_CSOR
 226 #define CONFIG_SYS_CS2_FTIM0            SYS_FPGA_CS_FTIM0
 227 #define CONFIG_SYS_CS2_FTIM1            SYS_FPGA_CS_FTIM1
 228 #define CONFIG_SYS_CS2_FTIM2            SYS_FPGA_CS_FTIM2
 229 #define CONFIG_SYS_CS2_FTIM3            SYS_FPGA_CS_FTIM3
 230 #else
 231 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 232 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 233 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 234 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 235 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 236 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 237 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 238 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 239 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 240 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 241 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 242 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 243 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 244 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 245 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 246 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 247 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 248 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 249 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 250 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 251 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 252 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 253 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 254 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 255 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 256 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 257 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 258 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 259 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 260 #define CONFIG_SYS_CSPR3_FINAL          SYS_FPGA_CSPR_FINAL
 261 #define CONFIG_SYS_AMASK3               SYS_FPGA_AMASK
 262 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 263 #define CONFIG_SYS_CS3_FTIM0            SYS_FPGA_CS_FTIM0
 264 #define CONFIG_SYS_CS3_FTIM1            SYS_FPGA_CS_FTIM1
 265 #define CONFIG_SYS_CS3_FTIM2            SYS_FPGA_CS_FTIM2
 266 #define CONFIG_SYS_CS3_FTIM3            SYS_FPGA_CS_FTIM3
 267 #endif
 268
 269 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 270
 271 /*
 272  * I2C bus multiplexer
 273  */
 274 #define I2C_MUX_PCA_ADDR_PRI            0x77
 275 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 276 #define I2C_RETIMER_ADDR                0x18
 277 #define I2C_RETIMER_ADDR2               0x19
 278 #define I2C_MUX_CH_DEFAULT              0x8
 279 #define I2C_MUX_CH5                     0xD
 280
 281 #define I2C_MUX_CH_VOL_MONITOR          0xA
 282
 283 /* Voltage monitor on channel 2*/
 284 #define I2C_VOL_MONITOR_ADDR           0x63
 285 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 286 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 287 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 288 #define I2C_SVDD_MONITOR_ADDR           0x4F
 289
 290 #define CONFIG_VID_FLS_ENV              "ls1088aqds_vdd_mv"
 291 #define CONFIG_VID
 292
 293 /* The lowest and highest voltage allowed for LS1088AQDS */
 294 #define VDD_MV_MIN                      819
 295 #define VDD_MV_MAX                      1212
 296
 297 #define CONFIG_VOL_MONITOR_LTC3882_SET
 298 #define CONFIG_VOL_MONITOR_LTC3882_READ
 299
 300 /* PM Bus commands code for LTC3882*/
 301 #define PMBUS_CMD_PAGE                  0x0
 302 #define PMBUS_CMD_READ_VOUT             0x8B
 303 #define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
 304 #define PMBUS_CMD_VOUT_COMMAND          0x21
 305
 306 #define PWM_CHANNEL0                    0x0
 307
 308 /*
 309 * RTC configuration
 310 */
 311 #define RTC
 312 #define CONFIG_RTC_PCF8563 1
 313 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 314 #define CONFIG_CMD_DATE
 315
 316 /* EEPROM */
 317 #define CONFIG_ID_EEPROM
 318 #define CONFIG_SYS_I2C_EEPROM_NXID
 319 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 320 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 321 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 322 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 323 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 324
 325 /* QSPI device */
 326 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 327 #define CONFIG_FSL_QSPI
 328 #define FSL_QSPI_FLASH_SIZE             (1 << 26)
 329 #define FSL_QSPI_FLASH_NUM              2
 330
 331 #endif
 332
 333 #ifdef CONFIG_FSL_DSPI
 334 #define CONFIG_SPI_FLASH_STMICRO
 335 #define CONFIG_SPI_FLASH_SST
 336 #define CONFIG_SPI_FLASH_EON
 337 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 338 #define CONFIG_SF_DEFAULT_BUS           1
 339 #define CONFIG_SF_DEFAULT_CS            0
 340 #endif
 341 #endif
 342
 343 #define CONFIG_CMD_MEMINFO
 344 #define CONFIG_SYS_MEMTEST_START        0x80000000
 345 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 346
 347 #ifdef CONFIG_SPL_BUILD
 348 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 349 #else
 350 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 351 #endif
 352
 353 #define CONFIG_FSL_MEMAC
 354
 355 /*  MMC  */
 356 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 357 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
 358         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 359
 360 /* Initial environment variables */
 361 #ifdef CONFIG_SECURE_BOOT
 362 #undef CONFIG_EXTRA_ENV_SETTINGS
 363 #define CONFIG_EXTRA_ENV_SETTINGS               \
 364         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 365         "loadaddr=0x90100000\0"                 \
 366         "kernel_addr=0x100000\0"                \
 367         "ramdisk_addr=0x800000\0"               \
 368         "ramdisk_size=0x2000000\0"              \
 369         "fdt_high=0xa0000000\0"                 \
 370         "initrd_high=0xffffffffffffffff\0"      \
 371         "kernel_start=0x1000000\0"              \
 372         "kernel_load=0xa0000000\0"              \
 373         "kernel_size=0x2800000\0"               \
 374         "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;"  \
 375         "sf read 0xa0700000 0x700000 0x4000; esbc_validate 0xa0700000;" \
 376         "sf read 0xa0e00000 0xe00000 0x100000;" \
 377         "sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;"  \
 378         "fsl_mc start mc 0xa0a00000 0xa0e00000\0"                       \
 379         "mcmemsize=0x70000000 \0"
 380 #else /* if !(CONFIG_SECURE_BOOT) */
 381 #if defined(CONFIG_QSPI_BOOT)
 382 #undef CONFIG_EXTRA_ENV_SETTINGS
 383 #define CONFIG_EXTRA_ENV_SETTINGS               \
 384         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 385         "loadaddr=0x90100000\0"                 \
 386         "kernel_addr=0x100000\0"                \
 387         "ramdisk_addr=0x800000\0"               \
 388         "ramdisk_size=0x2000000\0"              \
 389         "fdt_high=0xa0000000\0"                 \
 390         "initrd_high=0xffffffffffffffff\0"      \
 391         "kernel_start=0x1000000\0"              \
 392         "kernel_load=0xa0000000\0"              \
 393         "kernel_size=0x2800000\0"               \
 394         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 395         "sf read 0x80100000 0xE00000 0x100000;" \
 396         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 397         "mcmemsize=0x70000000 \0"
 398 #elif defined(CONFIG_SD_BOOT)
 399 #undef CONFIG_EXTRA_ENV_SETTINGS
 400 #define CONFIG_EXTRA_ENV_SETTINGS               \
 401         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 402         "loadaddr=0x90100000\0"                 \
 403         "kernel_addr=0x800\0"                \
 404         "ramdisk_addr=0x800000\0"               \
 405         "ramdisk_size=0x2000000\0"              \
 406         "fdt_high=0xa0000000\0"                 \
 407         "initrd_high=0xffffffffffffffff\0"      \
 408         "kernel_start=0x8000\0"              \
 409         "kernel_load=0xa0000000\0"              \
 410         "kernel_size=0x14000\0"               \
 411         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
 412         "mmc read 0x80100000 0x7000 0x800;" \
 413         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 414         "mcmemsize=0x70000000 \0"
 415 #else   /* NOR BOOT */
 416 #undef CONFIG_EXTRA_ENV_SETTINGS
 417 #define CONFIG_EXTRA_ENV_SETTINGS               \
 418         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 419         "loadaddr=0x90100000\0"                 \
 420         "kernel_addr=0x100000\0"                \
 421         "ramdisk_addr=0x800000\0"               \
 422         "ramdisk_size=0x2000000\0"              \
 423         "fdt_high=0xa0000000\0"                 \
 424         "initrd_high=0xffffffffffffffff\0"      \
 425         "kernel_start=0x1000000\0"              \
 426         "kernel_load=0xa0000000\0"              \
 427         "kernel_size=0x2800000\0"               \
 428         "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0"   \
 429         "mcmemsize=0x70000000 \0"
 430 #endif
 431 #endif /* CONFIG_SECURE_BOOT */
 432
 433 #ifdef CONFIG_FSL_MC_ENET
 434 #define CONFIG_FSL_MEMAC
 435 #define CONFIG_PHYLIB
 436 #define CONFIG_PHYLIB_10G
 437 #define CONFIG_PHY_VITESSE
 438 #define CONFIG_PHY_REALTEK
 439 #define CONFIG_PHY_TERANETICS
 440 #define RGMII_PHY1_ADDR         0x1
 441 #define RGMII_PHY2_ADDR         0x2
 442 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 443 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 444 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 445 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 446
 447 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 448 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
 449 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 450 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
 451 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 452 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
 453 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 454 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
 455 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 456 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
 457 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 458 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
 459 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 460 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
 461 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 462 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 463
 464 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
 465 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 466
 467 #endif
 468
 469 #define BOOT_TARGET_DEVICES(func) \
 470         func(USB, usb, 0) \
 471         func(MMC, mmc, 0) \
 472         func(SCSI, scsi, 0) \
 473         func(DHCP, dhcp, na)
 474 #include <config_distro_bootcmd.h>
 475
 476 #include <asm/fsl_secure_boot.h>
 477
 478 #endif /* __LS1088A_QDS_H */