watchdog: designware: Migrate CONFIG_DESIGNWARE_WATCHDOG to Kconfig
[platform/kernel/u-boot.git] / include / configs / ls1088aqds.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2017 NXP
4  */
5
6 #ifndef __LS1088A_QDS_H
7 #define __LS1088A_QDS_H
8
9 #include "ls1088a_common.h"
10
11
12 #ifndef __ASSEMBLY__
13 unsigned long get_board_sys_clk(void);
14 unsigned long get_board_ddr_clk(void);
15 #endif
16
17 #ifdef CONFIG_TFABOOT
18 #define CONFIG_SYS_MMC_ENV_DEV          0
19
20 #define CONFIG_MISC_INIT_R
21 #else
22 #if defined(CONFIG_QSPI_BOOT)
23 #elif defined(CONFIG_SD_BOOT)
24 #define CONFIG_SYS_MMC_ENV_DEV          0
25 #endif
26 #endif
27
28 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
29 #define CONFIG_QIXIS_I2C_ACCESS
30 #define SYS_NO_FLASH
31
32 #undef CONFIG_CMD_IMLS
33 #define CONFIG_SYS_CLK_FREQ             100000000
34 #define CONFIG_DDR_CLK_FREQ             100000000
35 #else
36 #define CONFIG_QIXIS_I2C_ACCESS
37 #ifndef CONFIG_DM_I2C
38 #define CONFIG_SYS_I2C_EARLY_INIT
39 #endif
40 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
41 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
42 #endif
43
44 #define COUNTER_FREQUENCY_REAL          (CONFIG_SYS_CLK_FREQ/4)
45 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
46
47 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
48
49 #define CONFIG_DDR_SPD
50 #define CONFIG_DDR_ECC
51 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
52 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
53 #define SPD_EEPROM_ADDRESS              0x51
54 #define CONFIG_SYS_SPD_BUS_NUM          0
55
56
57 /*
58  * IFC Definitions
59  */
60 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
61 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
62 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
63 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
64
65 #define CONFIG_SYS_NOR0_CSPR                                    \
66         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
67         CSPR_PORT_SIZE_16                                       | \
68         CSPR_MSEL_NOR                                           | \
69         CSPR_V)
70 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
71         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
72         CSPR_PORT_SIZE_16                                       | \
73         CSPR_MSEL_NOR                                           | \
74         CSPR_V)
75 #define CONFIG_SYS_NOR1_CSPR                                    \
76         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
77         CSPR_PORT_SIZE_16                                       | \
78         CSPR_MSEL_NOR                                           | \
79         CSPR_V)
80 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
81         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
82         CSPR_PORT_SIZE_16                                       | \
83         CSPR_MSEL_NOR                                           | \
84         CSPR_V)
85 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
86 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
87                                 FTIM0_NOR_TEADC(0x5) | \
88                                 FTIM0_NOR_TAVDS(0x6) | \
89                                 FTIM0_NOR_TEAHC(0x5))
90 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
91                                 FTIM1_NOR_TRAD_NOR(0x1a) | \
92                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
93 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x8) | \
94                                 FTIM2_NOR_TCH(0x8) | \
95                                 FTIM2_NOR_TWPH(0xe) | \
96                                 FTIM2_NOR_TWP(0x1c))
97 #define CONFIG_SYS_NOR_FTIM3    0x04000000
98 #define CONFIG_SYS_IFC_CCR      0x01000000
99
100 #ifndef SYS_NO_FLASH
101 #define CONFIG_SYS_FLASH_QUIET_TEST
102 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
103
104 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
105 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
106 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
107 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
108
109 #define CONFIG_SYS_FLASH_EMPTY_INFO
110 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
111                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
112 #endif
113 #endif
114
115 #define CONFIG_NAND_FSL_IFC
116 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
117 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
118
119 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
120 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
121                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
122                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
123                                 | CSPR_V)
124 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
125
126 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
127                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
128                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
129                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
130                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
131                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
132                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
133
134 #define CONFIG_SYS_NAND_ONFI_DETECTION
135
136 /* ONFI NAND Flash mode0 Timing Params */
137 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
138                                         FTIM0_NAND_TWP(0x18)   | \
139                                         FTIM0_NAND_TWCHT(0x07) | \
140                                         FTIM0_NAND_TWH(0x0a))
141 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
142                                         FTIM1_NAND_TWBE(0x39)  | \
143                                         FTIM1_NAND_TRR(0x0e)   | \
144                                         FTIM1_NAND_TRP(0x18))
145 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
146                                         FTIM2_NAND_TREH(0x0a) | \
147                                         FTIM2_NAND_TWHRE(0x1e))
148 #define CONFIG_SYS_NAND_FTIM3           0x0
149
150 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
151 #define CONFIG_SYS_MAX_NAND_DEVICE      1
152 #define CONFIG_MTD_NAND_VERIFY_WRITE
153 #define CONFIG_CMD_NAND
154
155 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
156
157 #define CONFIG_FSL_QIXIS
158 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
159 #define QIXIS_LBMAP_SWITCH              6
160 #define QIXIS_QMAP_MASK                 0xe0
161 #define QIXIS_QMAP_SHIFT                5
162 #define QIXIS_LBMAP_MASK                0x0f
163 #define QIXIS_LBMAP_SHIFT               0
164 #define QIXIS_LBMAP_DFLTBANK            0x0e
165 #define QIXIS_LBMAP_ALTBANK             0x2e
166 #define QIXIS_LBMAP_SD                  0x00
167 #define QIXIS_LBMAP_EMMC                0x00
168 #define QIXIS_LBMAP_IFC                 0x00
169 #define QIXIS_LBMAP_SD_QSPI             0x0e
170 #define QIXIS_LBMAP_QSPI                0x0e
171 #define QIXIS_RCW_SRC_IFC               0x25
172 #define QIXIS_RCW_SRC_SD                0x40
173 #define QIXIS_RCW_SRC_EMMC              0x41
174 #define QIXIS_RCW_SRC_QSPI              0x62
175 #define QIXIS_RST_CTL_RESET             0x41
176 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
177 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
178 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
179 #define QIXIS_RST_FORCE_MEM             0x01
180 #define QIXIS_STAT_PRES1                0xb
181 #define QIXIS_SDID_MASK                 0x07
182 #define QIXIS_ESDHC_NO_ADAPTER          0x7
183
184 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
185 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
186                                         | CSPR_PORT_SIZE_8 \
187                                         | CSPR_MSEL_GPCM \
188                                         | CSPR_V)
189 #define SYS_FPGA_CSPR_FINAL     (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
190                                         | CSPR_PORT_SIZE_8 \
191                                         | CSPR_MSEL_GPCM \
192                                         | CSPR_V)
193
194 #define SYS_FPGA_AMASK          IFC_AMASK(64 * 1024)
195 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
196 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(0)
197 #else
198 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(12)
199 #endif
200 /* QIXIS Timing parameters*/
201 #define SYS_FPGA_CS_FTIM0       (FTIM0_GPCM_TACSE(0x0e) | \
202                                         FTIM0_GPCM_TEADC(0x0e) | \
203                                         FTIM0_GPCM_TEAHC(0x0e))
204 #define SYS_FPGA_CS_FTIM1       (FTIM1_GPCM_TACO(0xff) | \
205                                         FTIM1_GPCM_TRAD(0x3f))
206 #define SYS_FPGA_CS_FTIM2       (FTIM2_GPCM_TCS(0xf) | \
207                                         FTIM2_GPCM_TCH(0xf) | \
208                                         FTIM2_GPCM_TWP(0x3E))
209 #define SYS_FPGA_CS_FTIM3       0x0
210
211 #ifdef CONFIG_TFABOOT
212 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
213 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
214 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
215 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
216 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
217 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
218 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
219 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
220 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
221 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
222 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
223 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
224 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
225 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
226 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
227 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
228 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
229 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
230 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
231 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
232 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
233 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
234 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
235 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
236 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
237 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
238 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
239 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
240 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
241 #define CONFIG_SYS_CSPR3_FINAL          SYS_FPGA_CSPR_FINAL
242 #define CONFIG_SYS_AMASK3               SYS_FPGA_AMASK
243 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
244 #define CONFIG_SYS_CS3_FTIM0            SYS_FPGA_CS_FTIM0
245 #define CONFIG_SYS_CS3_FTIM1            SYS_FPGA_CS_FTIM1
246 #define CONFIG_SYS_CS3_FTIM2            SYS_FPGA_CS_FTIM2
247 #define CONFIG_SYS_CS3_FTIM3            SYS_FPGA_CS_FTIM3
248 #else
249 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
250 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
251 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
252 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
253 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
254 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
255 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
256 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
257 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
258 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_FPGA_CSPR_EXT
259 #define CONFIG_SYS_CSPR2                CONFIG_SYS_FPGA_CSPR
260 #define CONFIG_SYS_CSPR2_FINAL          SYS_FPGA_CSPR_FINAL
261 #define CONFIG_SYS_AMASK2               SYS_FPGA_AMASK
262 #define CONFIG_SYS_CSOR2                CONFIG_SYS_FPGA_CSOR
263 #define CONFIG_SYS_CS2_FTIM0            SYS_FPGA_CS_FTIM0
264 #define CONFIG_SYS_CS2_FTIM1            SYS_FPGA_CS_FTIM1
265 #define CONFIG_SYS_CS2_FTIM2            SYS_FPGA_CS_FTIM2
266 #define CONFIG_SYS_CS2_FTIM3            SYS_FPGA_CS_FTIM3
267 #else
268 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
269 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
270 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
271 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
272 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
273 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
274 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
275 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
276 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
277 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
278 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
279 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
280 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
281 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
282 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
283 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
284 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
285 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
286 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
287 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
288 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
289 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
290 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
291 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
292 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
293 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
294 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
295 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
296 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
297 #define CONFIG_SYS_CSPR3_FINAL          SYS_FPGA_CSPR_FINAL
298 #define CONFIG_SYS_AMASK3               SYS_FPGA_AMASK
299 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
300 #define CONFIG_SYS_CS3_FTIM0            SYS_FPGA_CS_FTIM0
301 #define CONFIG_SYS_CS3_FTIM1            SYS_FPGA_CS_FTIM1
302 #define CONFIG_SYS_CS3_FTIM2            SYS_FPGA_CS_FTIM2
303 #define CONFIG_SYS_CS3_FTIM3            SYS_FPGA_CS_FTIM3
304 #endif
305 #endif
306
307 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
308
309 /*
310  * I2C bus multiplexer
311  */
312 #define I2C_MUX_PCA_ADDR_PRI            0x77
313 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
314 #define I2C_RETIMER_ADDR                0x18
315 #define I2C_RETIMER_ADDR2               0x19
316 #define I2C_MUX_CH_DEFAULT              0x8
317 #define I2C_MUX_CH5                     0xD
318
319 #define I2C_MUX_CH_VOL_MONITOR          0xA
320
321 /* Voltage monitor on channel 2*/
322 #define I2C_VOL_MONITOR_ADDR           0x63
323 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
324 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
325 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
326 #define I2C_SVDD_MONITOR_ADDR           0x4F
327
328 #define CONFIG_VID_FLS_ENV              "ls1088aqds_vdd_mv"
329 #define CONFIG_VID
330
331 /* The lowest and highest voltage allowed for LS1088AQDS */
332 #define VDD_MV_MIN                      819
333 #define VDD_MV_MAX                      1212
334
335 #define CONFIG_VOL_MONITOR_LTC3882_SET
336 #define CONFIG_VOL_MONITOR_LTC3882_READ
337
338 /* PM Bus commands code for LTC3882*/
339 #define PMBUS_CMD_PAGE                  0x0
340 #define PMBUS_CMD_READ_VOUT             0x8B
341 #define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
342 #define PMBUS_CMD_VOUT_COMMAND          0x21
343
344 #define PWM_CHANNEL0                    0x0
345
346 /*
347 * RTC configuration
348 */
349 #define RTC
350 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
351
352 /* EEPROM */
353 #define CONFIG_ID_EEPROM
354 #define CONFIG_SYS_I2C_EEPROM_NXID
355 #define CONFIG_SYS_EEPROM_BUS_NUM               0
356 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
357 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
358 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
359 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
360
361 /* QSPI device */
362 #if defined(CONFIG_TFABOOT) || \
363         defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
364 #define FSL_QSPI_FLASH_SIZE             (1 << 26)
365 #define FSL_QSPI_FLASH_NUM              2
366
367 #endif
368
369 #ifdef CONFIG_FSL_DSPI
370 #define CONFIG_SPI_FLASH_STMICRO
371 #define CONFIG_SPI_FLASH_SST
372 #define CONFIG_SPI_FLASH_EON
373 #if !defined(CONFIG_TFABOOT) && \
374         !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
375 #endif
376 #endif
377
378 #define CONFIG_CMD_MEMINFO
379 #define CONFIG_SYS_MEMTEST_START        0x80000000
380 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
381
382 #ifdef CONFIG_SPL_BUILD
383 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
384 #else
385 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
386 #endif
387
388 #define CONFIG_FSL_MEMAC
389
390 /*  MMC  */
391 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
392 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
393         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
394
395 /* Initial environment variables */
396 #ifdef CONFIG_NXP_ESBC
397 #undef CONFIG_EXTRA_ENV_SETTINGS
398 #define CONFIG_EXTRA_ENV_SETTINGS               \
399         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
400         "loadaddr=0x90100000\0"                 \
401         "kernel_addr=0x100000\0"                \
402         "ramdisk_addr=0x800000\0"               \
403         "ramdisk_size=0x2000000\0"              \
404         "fdt_high=0xa0000000\0"                 \
405         "initrd_high=0xffffffffffffffff\0"      \
406         "kernel_start=0x1000000\0"              \
407         "kernel_load=0xa0000000\0"              \
408         "kernel_size=0x2800000\0"               \
409         "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;"  \
410         "sf read 0xa0700000 0x700000 0x4000; esbc_validate 0xa0700000;" \
411         "sf read 0xa0e00000 0xe00000 0x100000;" \
412         "sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;"  \
413         "fsl_mc start mc 0xa0a00000 0xa0e00000\0"                       \
414         "mcmemsize=0x70000000 \0"
415 #else /* if !(CONFIG_NXP_ESBC) */
416 #ifdef CONFIG_TFABOOT
417 #define QSPI_MC_INIT_CMD                                \
418         "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"    \
419         "sf read 0x80100000 0xE00000 0x100000;" \
420         "fsl_mc start mc 0x80000000 0x80100000\0"
421 #define SD_MC_INIT_CMD                          \
422         "mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
423         "mmc read 0x80100000 0x7000 0x800;" \
424         "fsl_mc start mc 0x80000000 0x80100000\0"
425 #define IFC_MC_INIT_CMD                         \
426         "fsl_mc start mc 0x580A00000 0x580E00000\0"
427
428 #undef CONFIG_EXTRA_ENV_SETTINGS
429 #define CONFIG_EXTRA_ENV_SETTINGS               \
430         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
431         "loadaddr=0x90100000\0"                 \
432         "kernel_addr=0x100000\0"                \
433         "kernel_addr_sd=0x800\0"                \
434         "ramdisk_addr=0x800000\0"               \
435         "ramdisk_size=0x2000000\0"              \
436         "fdt_high=0xa0000000\0"                 \
437         "initrd_high=0xffffffffffffffff\0"      \
438         "kernel_start=0x1000000\0"              \
439         "kernel_start_sd=0x8000\0"              \
440         "kernel_load=0xa0000000\0"              \
441         "kernel_size=0x2800000\0"               \
442         "kernel_size_sd=0x14000\0"               \
443         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
444         "sf read 0x80100000 0xE00000 0x100000;" \
445         "fsl_mc start mc 0x80000000 0x80100000\0"       \
446         "mcmemsize=0x70000000 \0"
447 #define QSPI_NOR_BOOTCOMMAND    "sf probe 0:0;" \
448                                 "sf read 0x80001000 0xd00000 0x100000;"\
449                                 " fsl_mc lazyapply dpl 0x80001000 &&" \
450                                 " sf read $kernel_load $kernel_start" \
451                                 " $kernel_size && bootm $kernel_load"
452 #define SD_BOOTCOMMAND          "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
453                                 " fsl_mc lazyapply dpl 0x80001000 &&" \
454                                 " mmc read $kernel_load $kernel_start_sd" \
455                                 " $kernel_size_sd && bootm $kernel_load"
456 #define IFC_NOR_BOOTCOMMAND     "fsl_mc lazyapply dpl 0x580d00000 &&" \
457                                 " cp.b $kernel_start $kernel_load" \
458                                 " $kernel_size && bootm $kernel_load"
459 #else
460 #if defined(CONFIG_QSPI_BOOT)
461 #undef CONFIG_EXTRA_ENV_SETTINGS
462 #define CONFIG_EXTRA_ENV_SETTINGS               \
463         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
464         "loadaddr=0x90100000\0"                 \
465         "kernel_addr=0x100000\0"                \
466         "ramdisk_addr=0x800000\0"               \
467         "ramdisk_size=0x2000000\0"              \
468         "fdt_high=0xa0000000\0"                 \
469         "initrd_high=0xffffffffffffffff\0"      \
470         "kernel_start=0x1000000\0"              \
471         "kernel_load=0xa0000000\0"              \
472         "kernel_size=0x2800000\0"               \
473         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
474         "sf read 0x80100000 0xE00000 0x100000;" \
475         "fsl_mc start mc 0x80000000 0x80100000\0"       \
476         "mcmemsize=0x70000000 \0"
477 #elif defined(CONFIG_SD_BOOT)
478 #undef CONFIG_EXTRA_ENV_SETTINGS
479 #define CONFIG_EXTRA_ENV_SETTINGS               \
480         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
481         "loadaddr=0x90100000\0"                 \
482         "kernel_addr=0x800\0"                \
483         "ramdisk_addr=0x800000\0"               \
484         "ramdisk_size=0x2000000\0"              \
485         "fdt_high=0xa0000000\0"                 \
486         "initrd_high=0xffffffffffffffff\0"      \
487         "kernel_start=0x8000\0"              \
488         "kernel_load=0xa0000000\0"              \
489         "kernel_size=0x14000\0"               \
490         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
491         "mmc read 0x80100000 0x7000 0x800;" \
492         "fsl_mc start mc 0x80000000 0x80100000\0"       \
493         "mcmemsize=0x70000000 \0"
494 #else   /* NOR BOOT */
495 #undef CONFIG_EXTRA_ENV_SETTINGS
496 #define CONFIG_EXTRA_ENV_SETTINGS               \
497         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
498         "loadaddr=0x90100000\0"                 \
499         "kernel_addr=0x100000\0"                \
500         "ramdisk_addr=0x800000\0"               \
501         "ramdisk_size=0x2000000\0"              \
502         "fdt_high=0xa0000000\0"                 \
503         "initrd_high=0xffffffffffffffff\0"      \
504         "kernel_start=0x1000000\0"              \
505         "kernel_load=0xa0000000\0"              \
506         "kernel_size=0x2800000\0"               \
507         "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0"   \
508         "mcmemsize=0x70000000 \0"
509 #endif
510 #endif /* CONFIG_TFABOOT */
511 #endif /* CONFIG_NXP_ESBC */
512
513 #ifdef CONFIG_FSL_MC_ENET
514 #define CONFIG_FSL_MEMAC
515 #define CONFIG_PHYLIB
516 #define CONFIG_PHYLIB_10G
517 #define CONFIG_PHY_VITESSE
518 #define CONFIG_PHY_REALTEK
519 #define CONFIG_PHY_TERANETICS
520 #define RGMII_PHY1_ADDR         0x1
521 #define RGMII_PHY2_ADDR         0x2
522 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
523 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
524 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
525 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
526
527 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
528 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
529 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
530 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
531 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
532 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
533 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
534 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
535 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
536 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
537 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
538 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
539 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
540 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
541 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
542 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
543
544 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
545 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
546
547 #endif
548
549 #define BOOT_TARGET_DEVICES(func) \
550         func(USB, usb, 0) \
551         func(MMC, mmc, 0) \
552         func(SCSI, scsi, 0) \
553         func(DHCP, dhcp, na)
554 #include <config_distro_bootcmd.h>
555
556 #include <asm/fsl_secure_boot.h>
557
558 #endif /* __LS1088A_QDS_H */