include/configs/ls1088aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017, 2020 NXP
   4  */
   5
   6 #ifndef __LS1088A_QDS_H
   7 #define __LS1088A_QDS_H
   8
   9 #include "ls1088a_common.h"
  10
  11
  12 #ifndef __ASSEMBLY__
  13 unsigned long get_board_sys_clk(void);
  14 unsigned long get_board_ddr_clk(void);
  15 #endif
  16
  17 #ifdef CONFIG_TFABOOT
  18 #define CONFIG_SYS_MMC_ENV_DEV          0
  19
  20 #define CONFIG_MISC_INIT_R
  21 #else
  22 #if defined(CONFIG_QSPI_BOOT)
  23 #elif defined(CONFIG_SD_BOOT)
  24 #define CONFIG_SYS_MMC_ENV_DEV          0
  25 #endif
  26 #endif
  27
  28 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
  29 #define CONFIG_QIXIS_I2C_ACCESS
  30 #define SYS_NO_FLASH
  31
  32 #define CONFIG_SYS_CLK_FREQ             100000000
  33 #define CONFIG_DDR_CLK_FREQ             100000000
  34 #else
  35 #define CONFIG_QIXIS_I2C_ACCESS
  36 #ifndef CONFIG_DM_I2C
  37 #define CONFIG_SYS_I2C_EARLY_INIT
  38 #endif
  39 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
  40 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
  41 #endif
  42
  43 #define COUNTER_FREQUENCY_REAL          (CONFIG_SYS_CLK_FREQ/4)
  44 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  45
  46 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  47
  48 #define CONFIG_DDR_SPD
  49 #define CONFIG_DDR_ECC
  50 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  51 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  52 #define SPD_EEPROM_ADDRESS              0x51
  53 #define CONFIG_SYS_SPD_BUS_NUM          0
  54
  55
  56 /*
  57  * IFC Definitions
  58  */
  59 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  60 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  61 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
  62 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
  63
  64 #define CONFIG_SYS_NOR0_CSPR                                    \
  65         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  66         CSPR_PORT_SIZE_16                                       | \
  67         CSPR_MSEL_NOR                                           | \
  68         CSPR_V)
  69 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  70         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  71         CSPR_PORT_SIZE_16                                       | \
  72         CSPR_MSEL_NOR                                           | \
  73         CSPR_V)
  74 #define CONFIG_SYS_NOR1_CSPR                                    \
  75         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
  76         CSPR_PORT_SIZE_16                                       | \
  77         CSPR_MSEL_NOR                                           | \
  78         CSPR_V)
  79 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
  80         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
  81         CSPR_PORT_SIZE_16                                       | \
  82         CSPR_MSEL_NOR                                           | \
  83         CSPR_V)
  84 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
  85 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
  86                                 FTIM0_NOR_TEADC(0x5) | \
  87                                 FTIM0_NOR_TAVDS(0x6) | \
  88                                 FTIM0_NOR_TEAHC(0x5))
  89 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
  90                                 FTIM1_NOR_TRAD_NOR(0x1a) | \
  91                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
  92 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x8) | \
  93                                 FTIM2_NOR_TCH(0x8) | \
  94                                 FTIM2_NOR_TWPH(0xe) | \
  95                                 FTIM2_NOR_TWP(0x1c))
  96 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  97 #define CONFIG_SYS_IFC_CCR      0x01000000
  98
  99 #ifndef SYS_NO_FLASH
 100 #define CONFIG_SYS_FLASH_QUIET_TEST
 101 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 102
 103 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 104 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 105 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 106 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 107
 108 #define CONFIG_SYS_FLASH_EMPTY_INFO
 109 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
 110                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
 111 #endif
 112 #endif
 113
 114 #define CONFIG_NAND_FSL_IFC
 115 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 116 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 117
 118 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
 119 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 120                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 121                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 122                                 | CSPR_V)
 123 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 124
 125 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 126                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 127                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 128                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 129                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 130                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 131                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 132
 133 #define CONFIG_SYS_NAND_ONFI_DETECTION
 134
 135 /* ONFI NAND Flash mode0 Timing Params */
 136 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 137                                         FTIM0_NAND_TWP(0x18)   | \
 138                                         FTIM0_NAND_TWCHT(0x07) | \
 139                                         FTIM0_NAND_TWH(0x0a))
 140 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 141                                         FTIM1_NAND_TWBE(0x39)  | \
 142                                         FTIM1_NAND_TRR(0x0e)   | \
 143                                         FTIM1_NAND_TRP(0x18))
 144 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 145                                         FTIM2_NAND_TREH(0x0a) | \
 146                                         FTIM2_NAND_TWHRE(0x1e))
 147 #define CONFIG_SYS_NAND_FTIM3           0x0
 148
 149 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 150 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 151 #define CONFIG_MTD_NAND_VERIFY_WRITE
 152
 153 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 154
 155 #define CONFIG_FSL_QIXIS
 156 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 157 #define QIXIS_LBMAP_SWITCH              6
 158 #define QIXIS_QMAP_MASK                 0xe0
 159 #define QIXIS_QMAP_SHIFT                5
 160 #define QIXIS_LBMAP_MASK                0x0f
 161 #define QIXIS_LBMAP_SHIFT               0
 162 #define QIXIS_LBMAP_DFLTBANK            0x0e
 163 #define QIXIS_LBMAP_ALTBANK             0x2e
 164 #define QIXIS_LBMAP_SD                  0x00
 165 #define QIXIS_LBMAP_EMMC                0x00
 166 #define QIXIS_LBMAP_IFC                 0x00
 167 #define QIXIS_LBMAP_SD_QSPI             0x0e
 168 #define QIXIS_LBMAP_QSPI                0x0e
 169 #define QIXIS_RCW_SRC_IFC               0x25
 170 #define QIXIS_RCW_SRC_SD                0x40
 171 #define QIXIS_RCW_SRC_EMMC              0x41
 172 #define QIXIS_RCW_SRC_QSPI              0x62
 173 #define QIXIS_RST_CTL_RESET             0x41
 174 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 175 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 176 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 177 #define QIXIS_RST_FORCE_MEM             0x01
 178 #define QIXIS_STAT_PRES1                0xb
 179 #define QIXIS_SDID_MASK                 0x07
 180 #define QIXIS_ESDHC_NO_ADAPTER          0x7
 181
 182 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 183 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 184                                         | CSPR_PORT_SIZE_8 \
 185                                         | CSPR_MSEL_GPCM \
 186                                         | CSPR_V)
 187 #define SYS_FPGA_CSPR_FINAL     (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 188                                         | CSPR_PORT_SIZE_8 \
 189                                         | CSPR_MSEL_GPCM \
 190                                         | CSPR_V)
 191
 192 #define SYS_FPGA_AMASK          IFC_AMASK(64 * 1024)
 193 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 194 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(0)
 195 #else
 196 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(12)
 197 #endif
 198 /* QIXIS Timing parameters*/
 199 #define SYS_FPGA_CS_FTIM0       (FTIM0_GPCM_TACSE(0x0e) | \
 200                                         FTIM0_GPCM_TEADC(0x0e) | \
 201                                         FTIM0_GPCM_TEAHC(0x0e))
 202 #define SYS_FPGA_CS_FTIM1       (FTIM1_GPCM_TACO(0xff) | \
 203                                         FTIM1_GPCM_TRAD(0x3f))
 204 #define SYS_FPGA_CS_FTIM2       (FTIM2_GPCM_TCS(0xf) | \
 205                                         FTIM2_GPCM_TCH(0xf) | \
 206                                         FTIM2_GPCM_TWP(0x3E))
 207 #define SYS_FPGA_CS_FTIM3       0x0
 208
 209 #ifdef CONFIG_TFABOOT
 210 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 211 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 212 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 213 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 214 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 215 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 216 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 217 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 218 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 219 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 220 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 221 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 222 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 223 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 224 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 225 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 226 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 227 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 228 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 229 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 230 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 231 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 232 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 233 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 234 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 235 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 236 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 237 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 238 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 239 #define CONFIG_SYS_CSPR3_FINAL          SYS_FPGA_CSPR_FINAL
 240 #define CONFIG_SYS_AMASK3               SYS_FPGA_AMASK
 241 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 242 #define CONFIG_SYS_CS3_FTIM0            SYS_FPGA_CS_FTIM0
 243 #define CONFIG_SYS_CS3_FTIM1            SYS_FPGA_CS_FTIM1
 244 #define CONFIG_SYS_CS3_FTIM2            SYS_FPGA_CS_FTIM2
 245 #define CONFIG_SYS_CS3_FTIM3            SYS_FPGA_CS_FTIM3
 246 #else
 247 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 248 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 249 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 250 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 251 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 252 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 253 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 254 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 255 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 256 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 257 #define CONFIG_SYS_CSPR2                CONFIG_SYS_FPGA_CSPR
 258 #define CONFIG_SYS_CSPR2_FINAL          SYS_FPGA_CSPR_FINAL
 259 #define CONFIG_SYS_AMASK2               SYS_FPGA_AMASK
 260 #define CONFIG_SYS_CSOR2                CONFIG_SYS_FPGA_CSOR
 261 #define CONFIG_SYS_CS2_FTIM0            SYS_FPGA_CS_FTIM0
 262 #define CONFIG_SYS_CS2_FTIM1            SYS_FPGA_CS_FTIM1
 263 #define CONFIG_SYS_CS2_FTIM2            SYS_FPGA_CS_FTIM2
 264 #define CONFIG_SYS_CS2_FTIM3            SYS_FPGA_CS_FTIM3
 265 #else
 266 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 267 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 268 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 269 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 270 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 271 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 272 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 273 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 274 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 275 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 276 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 277 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 278 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 279 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 280 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 281 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 282 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 283 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 284 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 285 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 286 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 287 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 288 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 289 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 290 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 291 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 292 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 293 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 294 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 295 #define CONFIG_SYS_CSPR3_FINAL          SYS_FPGA_CSPR_FINAL
 296 #define CONFIG_SYS_AMASK3               SYS_FPGA_AMASK
 297 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 298 #define CONFIG_SYS_CS3_FTIM0            SYS_FPGA_CS_FTIM0
 299 #define CONFIG_SYS_CS3_FTIM1            SYS_FPGA_CS_FTIM1
 300 #define CONFIG_SYS_CS3_FTIM2            SYS_FPGA_CS_FTIM2
 301 #define CONFIG_SYS_CS3_FTIM3            SYS_FPGA_CS_FTIM3
 302 #endif
 303 #endif
 304
 305 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 306
 307 /*
 308  * I2C bus multiplexer
 309  */
 310 #define I2C_MUX_PCA_ADDR_PRI            0x77
 311 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 312 #define I2C_RETIMER_ADDR                0x18
 313 #define I2C_RETIMER_ADDR2               0x19
 314 #define I2C_MUX_CH_DEFAULT              0x8
 315 #define I2C_MUX_CH5                     0xD
 316
 317 #define I2C_MUX_CH_VOL_MONITOR          0xA
 318
 319 /* Voltage monitor on channel 2*/
 320 #define I2C_VOL_MONITOR_ADDR           0x63
 321 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 322 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 323 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 324 #define I2C_SVDD_MONITOR_ADDR           0x4F
 325
 326 #define CONFIG_VID_FLS_ENV              "ls1088aqds_vdd_mv"
 327 #define CONFIG_VID
 328
 329 /* The lowest and highest voltage allowed for LS1088AQDS */
 330 #define VDD_MV_MIN                      819
 331 #define VDD_MV_MAX                      1212
 332
 333 #define CONFIG_VOL_MONITOR_LTC3882_SET
 334 #define CONFIG_VOL_MONITOR_LTC3882_READ
 335
 336 /* PM Bus commands code for LTC3882*/
 337 #define PMBUS_CMD_PAGE                  0x0
 338 #define PMBUS_CMD_READ_VOUT             0x8B
 339 #define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
 340 #define PMBUS_CMD_VOUT_COMMAND          0x21
 341
 342 #define PWM_CHANNEL0                    0x0
 343
 344 /*
 345 * RTC configuration
 346 */
 347 #define RTC
 348 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 349
 350 /* EEPROM */
 351 #define CONFIG_ID_EEPROM
 352 #define CONFIG_SYS_I2C_EEPROM_NXID
 353 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 354 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 355 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 356 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 357 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 358
 359 #ifdef CONFIG_FSL_DSPI
 360 #define CONFIG_SPI_FLASH_STMICRO
 361 #define CONFIG_SPI_FLASH_SST
 362 #define CONFIG_SPI_FLASH_EON
 363 #if !defined(CONFIG_TFABOOT) && \
 364         !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 365 #endif
 366 #endif
 367
 368 #ifdef CONFIG_SPL_BUILD
 369 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 370 #else
 371 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 372 #endif
 373
 374 #define CONFIG_FSL_MEMAC
 375
 376 /*  MMC  */
 377 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 378 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
 379         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 380
 381 /* Initial environment variables */
 382 #ifdef CONFIG_NXP_ESBC
 383 #undef CONFIG_EXTRA_ENV_SETTINGS
 384 #define CONFIG_EXTRA_ENV_SETTINGS               \
 385         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 386         "loadaddr=0x90100000\0"                 \
 387         "kernel_addr=0x100000\0"                \
 388         "ramdisk_addr=0x800000\0"               \
 389         "ramdisk_size=0x2000000\0"              \
 390         "fdt_high=0xa0000000\0"                 \
 391         "initrd_high=0xffffffffffffffff\0"      \
 392         "kernel_start=0x1000000\0"              \
 393         "kernel_load=0xa0000000\0"              \
 394         "kernel_size=0x2800000\0"               \
 395         "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;"  \
 396         "sf read 0xa0640000 0x640000 0x4000; esbc_validate 0xa0640000;" \
 397         "sf read 0xa0e00000 0xe00000 0x100000;" \
 398         "sf read 0xa0680000 0x680000 0x4000;esbc_validate 0xa0680000;"  \
 399         "fsl_mc start mc 0xa0a00000 0xa0e00000\0"                       \
 400         "mcmemsize=0x70000000 \0"
 401 #else /* if !(CONFIG_NXP_ESBC) */
 402 #ifdef CONFIG_TFABOOT
 403 #define QSPI_MC_INIT_CMD                                \
 404         "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"    \
 405         "sf read 0x80100000 0xE00000 0x100000;" \
 406         "fsl_mc start mc 0x80000000 0x80100000\0"
 407 #define SD_MC_INIT_CMD                          \
 408         "mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
 409         "mmc read 0x80100000 0x7000 0x800;" \
 410         "fsl_mc start mc 0x80000000 0x80100000\0"
 411 #define IFC_MC_INIT_CMD                         \
 412         "fsl_mc start mc 0x580A00000 0x580E00000\0"
 413
 414 #undef CONFIG_EXTRA_ENV_SETTINGS
 415 #define CONFIG_EXTRA_ENV_SETTINGS               \
 416         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 417         "loadaddr=0x90100000\0"                 \
 418         "kernel_addr=0x100000\0"                \
 419         "kernel_addr_sd=0x800\0"                \
 420         "ramdisk_addr=0x800000\0"               \
 421         "ramdisk_size=0x2000000\0"              \
 422         "fdt_high=0xa0000000\0"                 \
 423         "initrd_high=0xffffffffffffffff\0"      \
 424         "kernel_start=0x1000000\0"              \
 425         "kernel_start_sd=0x8000\0"              \
 426         "kernel_load=0xa0000000\0"              \
 427         "kernel_size=0x2800000\0"               \
 428         "kernel_size_sd=0x14000\0"               \
 429         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 430         "sf read 0x80100000 0xE00000 0x100000;" \
 431         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 432         "mcmemsize=0x70000000 \0"               \
 433         "BOARD=ls1088aqds\0" \
 434         "scriptaddr=0x80000000\0"               \
 435         "scripthdraddr=0x80080000\0"            \
 436         BOOTENV                                 \
 437         "boot_scripts=ls1088aqds_boot.scr\0"    \
 438         "boot_script_hdr=hdr_ls1088aqds_bs.out\0"       \
 439         "scan_dev_for_boot_part="               \
 440                 "part list ${devtype} ${devnum} devplist; "     \
 441                 "env exists devplist || setenv devplist 1; "    \
 442                 "for distro_bootpart in ${devplist}; do "       \
 443                         "if fstype ${devtype} "                 \
 444                                 "${devnum}:${distro_bootpart} " \
 445                                 "bootfstype; then "             \
 446                                 "run scan_dev_for_boot; "       \
 447                         "fi; "                                  \
 448                 "done\0"                                        \
 449         "boot_a_script="                                        \
 450                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 451                 "${scriptaddr} ${prefix}${script}; "            \
 452         "env exists secureboot && load ${devtype} "             \
 453                 "${devnum}:${distro_bootpart} "                 \
 454                 "${scripthdraddr} ${prefix}${boot_script_hdr}; "\
 455                 "env exists secureboot "                        \
 456                 "&& esbc_validate ${scripthdraddr};"            \
 457                 "source ${scriptaddr}\0"                        \
 458         "qspi_bootcmd=echo Trying load from qspi..; " \
 459                 "sf probe 0:0; " \
 460                 "sf read 0x80001000 0xd00000 0x100000; " \
 461                 "fsl_mc lazyapply dpl 0x80001000 && " \
 462                 "sf read $kernel_load $kernel_start " \
 463                 "$kernel_size && bootm $kernel_load#$BOARD\0" \
 464         "sd_bootcmd=echo Trying load from sd card..; " \
 465                 "mmcinfo;mmc read 0x80001000 0x6800 0x800; "\
 466                 "fsl_mc lazyapply dpl 0x80001000 && " \
 467                 "mmc read $kernel_load $kernel_start_sd " \
 468                 "$kernel_size_sd && bootm $kernel_load#$BOARD\0" \
 469         "nor_bootcmd=echo Trying load from nor..; " \
 470                 "fsl_mc lazyapply dpl 0x580d00000 && " \
 471                 "cp.b $kernel_start $kernel_load " \
 472                 "$kernel_size && bootm $kernel_load#$BOARD\0"
 473 #else
 474 #if defined(CONFIG_QSPI_BOOT)
 475 #undef CONFIG_EXTRA_ENV_SETTINGS
 476 #define CONFIG_EXTRA_ENV_SETTINGS               \
 477         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 478         "loadaddr=0x90100000\0"                 \
 479         "kernel_addr=0x100000\0"                \
 480         "ramdisk_addr=0x800000\0"               \
 481         "ramdisk_size=0x2000000\0"              \
 482         "fdt_high=0xa0000000\0"                 \
 483         "initrd_high=0xffffffffffffffff\0"      \
 484         "kernel_start=0x1000000\0"              \
 485         "kernel_load=0xa0000000\0"              \
 486         "kernel_size=0x2800000\0"               \
 487         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 488         "sf read 0x80100000 0xE00000 0x100000;" \
 489         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 490         "mcmemsize=0x70000000 \0"
 491 #elif defined(CONFIG_SD_BOOT)
 492 #undef CONFIG_EXTRA_ENV_SETTINGS
 493 #define CONFIG_EXTRA_ENV_SETTINGS               \
 494         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 495         "loadaddr=0x90100000\0"                 \
 496         "kernel_addr=0x800\0"                \
 497         "ramdisk_addr=0x800000\0"               \
 498         "ramdisk_size=0x2000000\0"              \
 499         "fdt_high=0xa0000000\0"                 \
 500         "initrd_high=0xffffffffffffffff\0"      \
 501         "kernel_start=0x8000\0"              \
 502         "kernel_load=0xa0000000\0"              \
 503         "kernel_size=0x14000\0"               \
 504         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
 505         "mmc read 0x80100000 0x7000 0x800;" \
 506         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 507         "mcmemsize=0x70000000 \0"
 508 #else   /* NOR BOOT */
 509 #undef CONFIG_EXTRA_ENV_SETTINGS
 510 #define CONFIG_EXTRA_ENV_SETTINGS               \
 511         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 512         "loadaddr=0x90100000\0"                 \
 513         "kernel_addr=0x100000\0"                \
 514         "ramdisk_addr=0x800000\0"               \
 515         "ramdisk_size=0x2000000\0"              \
 516         "fdt_high=0xa0000000\0"                 \
 517         "initrd_high=0xffffffffffffffff\0"      \
 518         "kernel_start=0x1000000\0"              \
 519         "kernel_load=0xa0000000\0"              \
 520         "kernel_size=0x2800000\0"               \
 521         "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0"   \
 522         "mcmemsize=0x70000000 \0"
 523 #endif
 524 #endif /* CONFIG_TFABOOT */
 525 #endif /* CONFIG_NXP_ESBC */
 526
 527 #ifdef CONFIG_TFABOOT
 528 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "   \
 529                            "env exists secureboot && esbc_halt;;"
 530 #define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "     \
 531                            "env exists secureboot && esbc_halt;;"
 532 #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "   \
 533                            "env exists secureboot && esbc_halt;;"
 534 #endif
 535
 536 #ifdef CONFIG_FSL_MC_ENET
 537 #define CONFIG_FSL_MEMAC
 538 #define RGMII_PHY1_ADDR         0x1
 539 #define RGMII_PHY2_ADDR         0x2
 540 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 541 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 542 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 543 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 544
 545 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 546 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
 547 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 548 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
 549 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 550 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
 551 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 552 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
 553 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 554 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
 555 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 556 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
 557 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 558 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
 559 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 560 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 561
 562 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
 563 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 564
 565 #endif
 566
 567 #define BOOT_TARGET_DEVICES(func) \
 568         func(USB, usb, 0) \
 569         func(MMC, mmc, 0) \
 570         func(SCSI, scsi, 0) \
 571         func(DHCP, dhcp, na)
 572 #include <config_distro_bootcmd.h>
 573
 574 #include <asm/fsl_secure_boot.h>
 575
 576 #endif /* __LS1088A_QDS_H */