include/configs/ls1088aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017 NXP
   4  */
   5
   6 #ifndef __LS1088A_QDS_H
   7 #define __LS1088A_QDS_H
   8
   9 #include "ls1088a_common.h"
  10
  11
  12 #ifndef __ASSEMBLY__
  13 unsigned long get_board_sys_clk(void);
  14 unsigned long get_board_ddr_clk(void);
  15 #endif
  16
  17 #ifdef CONFIG_TFABOOT
  18 #define CONFIG_SYS_MMC_ENV_DEV          0
  19
  20 #define CONFIG_ENV_SIZE                 0x20000
  21 #define CONFIG_ENV_OFFSET               0x500000
  22 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + \
  23                                          CONFIG_ENV_OFFSET)
  24 #define CONFIG_ENV_SECT_SIZE            0x40000
  25 #else
  26 #if defined(CONFIG_QSPI_BOOT)
  27 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  28 #define CONFIG_ENV_SECT_SIZE            0x40000
  29 #elif defined(CONFIG_SD_BOOT)
  30 #define CONFIG_ENV_OFFSET               (3 * 1024 * 1024)
  31 #define CONFIG_SYS_MMC_ENV_DEV          0
  32 #define CONFIG_ENV_SIZE                 0x2000
  33 #else
  34 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x300000)
  35 #define CONFIG_ENV_SECT_SIZE            0x20000
  36 #define CONFIG_ENV_SIZE                 0x20000
  37 #endif
  38 #endif
  39
  40 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
  41 #define CONFIG_QIXIS_I2C_ACCESS
  42 #define SYS_NO_FLASH
  43
  44 #undef CONFIG_CMD_IMLS
  45 #define CONFIG_SYS_CLK_FREQ             100000000
  46 #define CONFIG_DDR_CLK_FREQ             100000000
  47 #else
  48 #define CONFIG_QIXIS_I2C_ACCESS
  49 #define CONFIG_SYS_I2C_EARLY_INIT
  50 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
  51 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
  52 #endif
  53
  54 #define COUNTER_FREQUENCY_REAL          (CONFIG_SYS_CLK_FREQ/4)
  55 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  56
  57 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  58
  59 #define CONFIG_DDR_SPD
  60 #define CONFIG_DDR_ECC
  61 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  62 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  63 #define SPD_EEPROM_ADDRESS              0x51
  64 #define CONFIG_SYS_SPD_BUS_NUM          0
  65
  66
  67 /*
  68  * IFC Definitions
  69  */
  70 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  71 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  72 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
  73 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
  74
  75 #define CONFIG_SYS_NOR0_CSPR                                    \
  76         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  77         CSPR_PORT_SIZE_16                                       | \
  78         CSPR_MSEL_NOR                                           | \
  79         CSPR_V)
  80 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  81         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  82         CSPR_PORT_SIZE_16                                       | \
  83         CSPR_MSEL_NOR                                           | \
  84         CSPR_V)
  85 #define CONFIG_SYS_NOR1_CSPR                                    \
  86         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
  87         CSPR_PORT_SIZE_16                                       | \
  88         CSPR_MSEL_NOR                                           | \
  89         CSPR_V)
  90 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
  91         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
  92         CSPR_PORT_SIZE_16                                       | \
  93         CSPR_MSEL_NOR                                           | \
  94         CSPR_V)
  95 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
  96 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
  97                                 FTIM0_NOR_TEADC(0x5) | \
  98                                 FTIM0_NOR_TAVDS(0x6) | \
  99                                 FTIM0_NOR_TEAHC(0x5))
 100 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 101                                 FTIM1_NOR_TRAD_NOR(0x1a) | \
 102                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 103 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x8) | \
 104                                 FTIM2_NOR_TCH(0x8) | \
 105                                 FTIM2_NOR_TWPH(0xe) | \
 106                                 FTIM2_NOR_TWP(0x1c))
 107 #define CONFIG_SYS_NOR_FTIM3    0x04000000
 108 #define CONFIG_SYS_IFC_CCR      0x01000000
 109
 110 #ifndef SYS_NO_FLASH
 111 #define CONFIG_SYS_FLASH_QUIET_TEST
 112 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 113
 114 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 115 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 116 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 117 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 118
 119 #define CONFIG_SYS_FLASH_EMPTY_INFO
 120 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
 121                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
 122 #endif
 123 #endif
 124
 125 #define CONFIG_NAND_FSL_IFC
 126 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 127 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 128
 129 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
 130 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 131                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 132                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 133                                 | CSPR_V)
 134 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 135
 136 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 137                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 138                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 139                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 140                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 141                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 142                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 143
 144 #define CONFIG_SYS_NAND_ONFI_DETECTION
 145
 146 /* ONFI NAND Flash mode0 Timing Params */
 147 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 148                                         FTIM0_NAND_TWP(0x18)   | \
 149                                         FTIM0_NAND_TWCHT(0x07) | \
 150                                         FTIM0_NAND_TWH(0x0a))
 151 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 152                                         FTIM1_NAND_TWBE(0x39)  | \
 153                                         FTIM1_NAND_TRR(0x0e)   | \
 154                                         FTIM1_NAND_TRP(0x18))
 155 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 156                                         FTIM2_NAND_TREH(0x0a) | \
 157                                         FTIM2_NAND_TWHRE(0x1e))
 158 #define CONFIG_SYS_NAND_FTIM3           0x0
 159
 160 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 161 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 162 #define CONFIG_MTD_NAND_VERIFY_WRITE
 163 #define CONFIG_CMD_NAND
 164
 165 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 166
 167 #define CONFIG_FSL_QIXIS
 168 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 169 #define QIXIS_LBMAP_SWITCH              6
 170 #define QIXIS_QMAP_MASK                 0xe0
 171 #define QIXIS_QMAP_SHIFT                5
 172 #define QIXIS_LBMAP_MASK                0x0f
 173 #define QIXIS_LBMAP_SHIFT               0
 174 #define QIXIS_LBMAP_DFLTBANK            0x0e
 175 #define QIXIS_LBMAP_ALTBANK             0x2e
 176 #define QIXIS_LBMAP_SD                  0x00
 177 #define QIXIS_LBMAP_EMMC                0x00
 178 #define QIXIS_LBMAP_IFC                 0x00
 179 #define QIXIS_LBMAP_SD_QSPI             0x0e
 180 #define QIXIS_LBMAP_QSPI                0x0e
 181 #define QIXIS_RCW_SRC_IFC               0x25
 182 #define QIXIS_RCW_SRC_SD                0x40
 183 #define QIXIS_RCW_SRC_EMMC              0x41
 184 #define QIXIS_RCW_SRC_QSPI              0x62
 185 #define QIXIS_RST_CTL_RESET             0x41
 186 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 187 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 188 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 189 #define QIXIS_RST_FORCE_MEM             0x01
 190 #define QIXIS_STAT_PRES1                0xb
 191 #define QIXIS_SDID_MASK                 0x07
 192 #define QIXIS_ESDHC_NO_ADAPTER          0x7
 193
 194 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 195 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 196                                         | CSPR_PORT_SIZE_8 \
 197                                         | CSPR_MSEL_GPCM \
 198                                         | CSPR_V)
 199 #define SYS_FPGA_CSPR_FINAL     (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 200                                         | CSPR_PORT_SIZE_8 \
 201                                         | CSPR_MSEL_GPCM \
 202                                         | CSPR_V)
 203
 204 #define SYS_FPGA_AMASK          IFC_AMASK(64 * 1024)
 205 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 206 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(0)
 207 #else
 208 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(12)
 209 #endif
 210 /* QIXIS Timing parameters*/
 211 #define SYS_FPGA_CS_FTIM0       (FTIM0_GPCM_TACSE(0x0e) | \
 212                                         FTIM0_GPCM_TEADC(0x0e) | \
 213                                         FTIM0_GPCM_TEAHC(0x0e))
 214 #define SYS_FPGA_CS_FTIM1       (FTIM1_GPCM_TACO(0xff) | \
 215                                         FTIM1_GPCM_TRAD(0x3f))
 216 #define SYS_FPGA_CS_FTIM2       (FTIM2_GPCM_TCS(0xf) | \
 217                                         FTIM2_GPCM_TCH(0xf) | \
 218                                         FTIM2_GPCM_TWP(0x3E))
 219 #define SYS_FPGA_CS_FTIM3       0x0
 220
 221 #ifdef CONFIG_TFABOOT
 222 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 223 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 224 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 225 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 226 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 227 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 228 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 229 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 230 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 231 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 232 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 233 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 234 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 235 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 236 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 237 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 238 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 239 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 240 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 241 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 242 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 243 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 244 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 245 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 246 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 247 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 248 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 249 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 250 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 251 #define CONFIG_SYS_CSPR3_FINAL          SYS_FPGA_CSPR_FINAL
 252 #define CONFIG_SYS_AMASK3               SYS_FPGA_AMASK
 253 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 254 #define CONFIG_SYS_CS3_FTIM0            SYS_FPGA_CS_FTIM0
 255 #define CONFIG_SYS_CS3_FTIM1            SYS_FPGA_CS_FTIM1
 256 #define CONFIG_SYS_CS3_FTIM2            SYS_FPGA_CS_FTIM2
 257 #define CONFIG_SYS_CS3_FTIM3            SYS_FPGA_CS_FTIM3
 258 #else
 259 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 260 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 261 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 262 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 263 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 264 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 265 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 266 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 267 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 268 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 269 #define CONFIG_SYS_CSPR2                CONFIG_SYS_FPGA_CSPR
 270 #define CONFIG_SYS_CSPR2_FINAL          SYS_FPGA_CSPR_FINAL
 271 #define CONFIG_SYS_AMASK2               SYS_FPGA_AMASK
 272 #define CONFIG_SYS_CSOR2                CONFIG_SYS_FPGA_CSOR
 273 #define CONFIG_SYS_CS2_FTIM0            SYS_FPGA_CS_FTIM0
 274 #define CONFIG_SYS_CS2_FTIM1            SYS_FPGA_CS_FTIM1
 275 #define CONFIG_SYS_CS2_FTIM2            SYS_FPGA_CS_FTIM2
 276 #define CONFIG_SYS_CS2_FTIM3            SYS_FPGA_CS_FTIM3
 277 #else
 278 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 279 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 280 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 281 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 282 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 283 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 284 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 285 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 286 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 287 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 288 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 289 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 290 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 291 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 292 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 293 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 294 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 295 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 296 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 297 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 298 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 299 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 300 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 301 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 302 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 303 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 304 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 305 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 306 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 307 #define CONFIG_SYS_CSPR3_FINAL          SYS_FPGA_CSPR_FINAL
 308 #define CONFIG_SYS_AMASK3               SYS_FPGA_AMASK
 309 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 310 #define CONFIG_SYS_CS3_FTIM0            SYS_FPGA_CS_FTIM0
 311 #define CONFIG_SYS_CS3_FTIM1            SYS_FPGA_CS_FTIM1
 312 #define CONFIG_SYS_CS3_FTIM2            SYS_FPGA_CS_FTIM2
 313 #define CONFIG_SYS_CS3_FTIM3            SYS_FPGA_CS_FTIM3
 314 #endif
 315 #endif
 316
 317 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 318
 319 /*
 320  * I2C bus multiplexer
 321  */
 322 #define I2C_MUX_PCA_ADDR_PRI            0x77
 323 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 324 #define I2C_RETIMER_ADDR                0x18
 325 #define I2C_RETIMER_ADDR2               0x19
 326 #define I2C_MUX_CH_DEFAULT              0x8
 327 #define I2C_MUX_CH5                     0xD
 328
 329 #define I2C_MUX_CH_VOL_MONITOR          0xA
 330
 331 /* Voltage monitor on channel 2*/
 332 #define I2C_VOL_MONITOR_ADDR           0x63
 333 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 334 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 335 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 336 #define I2C_SVDD_MONITOR_ADDR           0x4F
 337
 338 #define CONFIG_VID_FLS_ENV              "ls1088aqds_vdd_mv"
 339 #define CONFIG_VID
 340
 341 /* The lowest and highest voltage allowed for LS1088AQDS */
 342 #define VDD_MV_MIN                      819
 343 #define VDD_MV_MAX                      1212
 344
 345 #define CONFIG_VOL_MONITOR_LTC3882_SET
 346 #define CONFIG_VOL_MONITOR_LTC3882_READ
 347
 348 /* PM Bus commands code for LTC3882*/
 349 #define PMBUS_CMD_PAGE                  0x0
 350 #define PMBUS_CMD_READ_VOUT             0x8B
 351 #define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
 352 #define PMBUS_CMD_VOUT_COMMAND          0x21
 353
 354 #define PWM_CHANNEL0                    0x0
 355
 356 /*
 357 * RTC configuration
 358 */
 359 #define RTC
 360 #define CONFIG_RTC_PCF8563 1
 361 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 362 #define CONFIG_CMD_DATE
 363
 364 /* EEPROM */
 365 #define CONFIG_ID_EEPROM
 366 #define CONFIG_SYS_I2C_EEPROM_NXID
 367 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 368 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 369 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 370 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 371 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 372
 373 /* QSPI device */
 374 #if defined(CONFIG_TFABOOT) || \
 375         defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 376 #define FSL_QSPI_FLASH_SIZE             (1 << 26)
 377 #define FSL_QSPI_FLASH_NUM              2
 378
 379 #endif
 380
 381 #ifdef CONFIG_FSL_DSPI
 382 #define CONFIG_SPI_FLASH_STMICRO
 383 #define CONFIG_SPI_FLASH_SST
 384 #define CONFIG_SPI_FLASH_EON
 385 #if !defined(CONFIG_TFABOOT) && \
 386         !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 387 #define CONFIG_SF_DEFAULT_BUS           1
 388 #define CONFIG_SF_DEFAULT_CS            0
 389 #endif
 390 #endif
 391
 392 #define CONFIG_CMD_MEMINFO
 393 #define CONFIG_SYS_MEMTEST_START        0x80000000
 394 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 395
 396 #ifdef CONFIG_SPL_BUILD
 397 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 398 #else
 399 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 400 #endif
 401
 402 #define CONFIG_FSL_MEMAC
 403
 404 /*  MMC  */
 405 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 406 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
 407         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 408
 409 /* Initial environment variables */
 410 #ifdef CONFIG_SECURE_BOOT
 411 #undef CONFIG_EXTRA_ENV_SETTINGS
 412 #define CONFIG_EXTRA_ENV_SETTINGS               \
 413         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 414         "loadaddr=0x90100000\0"                 \
 415         "kernel_addr=0x100000\0"                \
 416         "ramdisk_addr=0x800000\0"               \
 417         "ramdisk_size=0x2000000\0"              \
 418         "fdt_high=0xa0000000\0"                 \
 419         "initrd_high=0xffffffffffffffff\0"      \
 420         "kernel_start=0x1000000\0"              \
 421         "kernel_load=0xa0000000\0"              \
 422         "kernel_size=0x2800000\0"               \
 423         "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;"  \
 424         "sf read 0xa0700000 0x700000 0x4000; esbc_validate 0xa0700000;" \
 425         "sf read 0xa0e00000 0xe00000 0x100000;" \
 426         "sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;"  \
 427         "fsl_mc start mc 0xa0a00000 0xa0e00000\0"                       \
 428         "mcmemsize=0x70000000 \0"
 429 #else /* if !(CONFIG_SECURE_BOOT) */
 430 #ifdef CONFIG_TFABOOT
 431 #define QSPI_MC_INIT_CMD                                \
 432         "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"    \
 433         "sf read 0x80100000 0xE00000 0x100000;" \
 434         "fsl_mc start mc 0x80000000 0x80100000\0"
 435 #define SD_MC_INIT_CMD                          \
 436         "mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
 437         "mmc read 0x80100000 0x7000 0x800;" \
 438         "fsl_mc start mc 0x80000000 0x80100000\0"
 439 #define IFC_MC_INIT_CMD                         \
 440         "fsl_mc start mc 0x580A00000 0x580E00000\0"
 441
 442 #undef CONFIG_EXTRA_ENV_SETTINGS
 443 #define CONFIG_EXTRA_ENV_SETTINGS               \
 444         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 445         "loadaddr=0x90100000\0"                 \
 446         "kernel_addr=0x100000\0"                \
 447         "kernel_addr_sd=0x800\0"                \
 448         "ramdisk_addr=0x800000\0"               \
 449         "ramdisk_size=0x2000000\0"              \
 450         "fdt_high=0xa0000000\0"                 \
 451         "initrd_high=0xffffffffffffffff\0"      \
 452         "kernel_start=0x1000000\0"              \
 453         "kernel_start_sd=0x8000\0"              \
 454         "kernel_load=0xa0000000\0"              \
 455         "kernel_size=0x2800000\0"               \
 456         "kernel_size_sd=0x14000\0"               \
 457         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 458         "sf read 0x80100000 0xE00000 0x100000;" \
 459         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 460         "mcmemsize=0x70000000 \0"
 461 #define QSPI_NOR_BOOTCOMMAND    "sf probe 0:0;" \
 462                                 "sf read 0x80001000 0xd00000 0x100000;"\
 463                                 " fsl_mc lazyapply dpl 0x80001000 &&" \
 464                                 " sf read $kernel_load $kernel_start" \
 465                                 " $kernel_size && bootm $kernel_load"
 466 #define SD_BOOTCOMMAND          "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
 467                                 " fsl_mc lazyapply dpl 0x80001000 &&" \
 468                                 " mmc read $kernel_load $kernel_start_sd" \
 469                                 " $kernel_size_sd && bootm $kernel_load"
 470 #define IFC_NOR_BOOTCOMMAND     "fsl_mc lazyapply dpl 0x580d00000 &&" \
 471                                 " cp.b $kernel_start $kernel_load" \
 472                                 " $kernel_size && bootm $kernel_load"
 473 #else
 474 #if defined(CONFIG_QSPI_BOOT)
 475 #undef CONFIG_EXTRA_ENV_SETTINGS
 476 #define CONFIG_EXTRA_ENV_SETTINGS               \
 477         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 478         "loadaddr=0x90100000\0"                 \
 479         "kernel_addr=0x100000\0"                \
 480         "ramdisk_addr=0x800000\0"               \
 481         "ramdisk_size=0x2000000\0"              \
 482         "fdt_high=0xa0000000\0"                 \
 483         "initrd_high=0xffffffffffffffff\0"      \
 484         "kernel_start=0x1000000\0"              \
 485         "kernel_load=0xa0000000\0"              \
 486         "kernel_size=0x2800000\0"               \
 487         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 488         "sf read 0x80100000 0xE00000 0x100000;" \
 489         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 490         "mcmemsize=0x70000000 \0"
 491 #elif defined(CONFIG_SD_BOOT)
 492 #undef CONFIG_EXTRA_ENV_SETTINGS
 493 #define CONFIG_EXTRA_ENV_SETTINGS               \
 494         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 495         "loadaddr=0x90100000\0"                 \
 496         "kernel_addr=0x800\0"                \
 497         "ramdisk_addr=0x800000\0"               \
 498         "ramdisk_size=0x2000000\0"              \
 499         "fdt_high=0xa0000000\0"                 \
 500         "initrd_high=0xffffffffffffffff\0"      \
 501         "kernel_start=0x8000\0"              \
 502         "kernel_load=0xa0000000\0"              \
 503         "kernel_size=0x14000\0"               \
 504         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
 505         "mmc read 0x80100000 0x7000 0x800;" \
 506         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 507         "mcmemsize=0x70000000 \0"
 508 #else   /* NOR BOOT */
 509 #undef CONFIG_EXTRA_ENV_SETTINGS
 510 #define CONFIG_EXTRA_ENV_SETTINGS               \
 511         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 512         "loadaddr=0x90100000\0"                 \
 513         "kernel_addr=0x100000\0"                \
 514         "ramdisk_addr=0x800000\0"               \
 515         "ramdisk_size=0x2000000\0"              \
 516         "fdt_high=0xa0000000\0"                 \
 517         "initrd_high=0xffffffffffffffff\0"      \
 518         "kernel_start=0x1000000\0"              \
 519         "kernel_load=0xa0000000\0"              \
 520         "kernel_size=0x2800000\0"               \
 521         "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0"   \
 522         "mcmemsize=0x70000000 \0"
 523 #endif
 524 #endif /* CONFIG_TFABOOT */
 525 #endif /* CONFIG_SECURE_BOOT */
 526
 527 #ifdef CONFIG_FSL_MC_ENET
 528 #define CONFIG_FSL_MEMAC
 529 #define CONFIG_PHYLIB
 530 #define CONFIG_PHYLIB_10G
 531 #define CONFIG_PHY_VITESSE
 532 #define CONFIG_PHY_REALTEK
 533 #define CONFIG_PHY_TERANETICS
 534 #define RGMII_PHY1_ADDR         0x1
 535 #define RGMII_PHY2_ADDR         0x2
 536 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 537 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 538 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 539 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 540
 541 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 542 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
 543 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 544 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
 545 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 546 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
 547 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 548 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
 549 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 550 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
 551 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 552 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
 553 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 554 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
 555 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 556 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 557
 558 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
 559 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 560
 561 #endif
 562
 563 #define BOOT_TARGET_DEVICES(func) \
 564         func(USB, usb, 0) \
 565         func(MMC, mmc, 0) \
 566         func(SCSI, scsi, 0) \
 567         func(DHCP, dhcp, na)
 568 #include <config_distro_bootcmd.h>
 569
 570 #include <asm/fsl_secure_boot.h>
 571
 572 #endif /* __LS1088A_QDS_H */