2 * Copyright 2016 Freescale Semiconductor, Inc.
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef __LS1046AQDS_H__
8 #define __LS1046AQDS_H__
10 #include "ls1046a_common.h"
12 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
13 #define CONFIG_SYS_TEXT_BASE 0x82000000
14 #elif defined(CONFIG_QSPI_BOOT)
15 #define CONFIG_SYS_TEXT_BASE 0x40100000
17 #define CONFIG_SYS_TEXT_BASE 0x60100000
21 unsigned long get_board_sys_clk(void);
22 unsigned long get_board_ddr_clk(void);
25 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
26 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
28 #define CONFIG_SKIP_LOWLEVEL_INIT
30 #define CONFIG_LAYERSCAPE_NS_ACCESS
32 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
33 /* Physical Memory Map */
34 #define CONFIG_CHIP_SELECTS_PER_CTRL 4
35 #define CONFIG_NR_DRAM_BANKS 2
37 #define CONFIG_DDR_SPD
38 #define SPD_EEPROM_ADDRESS 0x51
39 #define CONFIG_SYS_SPD_BUS_NUM 0
42 #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
45 #define CONFIG_DDR_ECC
47 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
48 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef
52 #ifdef CONFIG_FSL_DSPI
53 #define CONFIG_SPI_FLASH_STMICRO /* cs0 */
54 #define CONFIG_SPI_FLASH_SST /* cs1 */
55 #define CONFIG_SPI_FLASH_EON /* cs2 */
56 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
57 #define CONFIG_SF_DEFAULT_BUS 1
58 #define CONFIG_SF_DEFAULT_CS 0
63 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
64 #ifdef CONFIG_FSL_QSPI
65 #define CONFIG_SPI_FLASH_SPANSION
66 #define FSL_QSPI_FLASH_SIZE (1 << 24)
67 #define FSL_QSPI_FLASH_NUM 2
71 #ifdef CONFIG_SYS_DPAA_FMAN
72 #define CONFIG_FMAN_ENET
73 #define CONFIG_PHY_VITESSE
74 #define CONFIG_PHY_REALTEK
75 #define CONFIG_PHYLIB_10G
76 #define RGMII_PHY1_ADDR 0x1
77 #define RGMII_PHY2_ADDR 0x2
78 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
79 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
80 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
81 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
82 /* PHY address on QSGMII riser card on slot 2 */
83 #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
84 #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
85 #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
86 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
89 #ifdef CONFIG_RAMBOOT_PBL
90 #define CONFIG_SYS_FSL_PBL_PBI \
91 board/freescale/ls1046aqds/ls1046aqds_pbi.cfg
94 #ifdef CONFIG_NAND_BOOT
95 #define CONFIG_SYS_FSL_PBL_RCW \
96 board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg
100 #ifdef CONFIG_SD_BOOT_QSPI
101 #define CONFIG_SYS_FSL_PBL_RCW \
102 board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg
104 #define CONFIG_SYS_FSL_PBL_RCW \
105 board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg
110 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
111 #define CONFIG_FSL_IFC
113 * CONFIG_SYS_FLASH_BASE has the final address (core view)
114 * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
115 * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
116 * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
118 #define CONFIG_SYS_FLASH_BASE 0x60000000
119 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
120 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
122 #ifdef CONFIG_MTD_NOR_FLASH
123 #define CONFIG_FLASH_CFI_DRIVER
124 #define CONFIG_SYS_FLASH_CFI
125 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
126 #define CONFIG_SYS_FLASH_QUIET_TEST
127 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
133 #define CONFIG_LPUART_32B_REG
134 #define CFG_UART_MUX_MASK 0x6
135 #define CFG_UART_MUX_SHIFT 1
136 #define CFG_LPUART_EN 0x2
140 #define CONFIG_HAS_FSL_XHCI_USB
141 #ifdef CONFIG_HAS_FSL_XHCI_USB
142 #define CONFIG_USB_XHCI_HCD
143 #define CONFIG_USB_XHCI_FSL
144 #define CONFIG_USB_XHCI_DWC3
145 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
146 #define CONFIG_USB_STORAGE
150 #define CONFIG_LIBATA
151 #define CONFIG_SCSI_AHCI
152 #define CONFIG_SCSI_AHCI_PLAT
155 #define CONFIG_ID_EEPROM
156 #define CONFIG_SYS_I2C_EEPROM_NXID
157 #define CONFIG_SYS_EEPROM_BUS_NUM 0
158 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
159 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
160 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
161 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
163 #define CONFIG_SYS_SATA AHCI_BASE_ADDR
165 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
166 #define CONFIG_SYS_SCSI_MAX_LUN 1
167 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
168 CONFIG_SYS_SCSI_MAX_LUN)
173 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
174 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
175 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
176 CSPR_PORT_SIZE_16 | \
179 #define CONFIG_SYS_NOR1_CSPR_EXT (0x0)
180 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
182 CSPR_PORT_SIZE_16 | \
185 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
187 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
189 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
190 FTIM0_NOR_TEADC(0x5) | \
191 FTIM0_NOR_TEAHC(0x5))
192 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
193 FTIM1_NOR_TRAD_NOR(0x1a) | \
194 FTIM1_NOR_TSEQRAD_NOR(0x13))
195 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
196 FTIM2_NOR_TCH(0x4) | \
197 FTIM2_NOR_TWPH(0xe) | \
199 #define CONFIG_SYS_NOR_FTIM3 0
201 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
202 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
203 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
204 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
206 #define CONFIG_SYS_FLASH_EMPTY_INFO
207 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \
208 CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
210 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
211 #define CONFIG_SYS_WRITE_SWAPPED_DATA
214 * NAND Flash Definitions
216 #define CONFIG_NAND_FSL_IFC
218 #define CONFIG_SYS_NAND_BASE 0x7e800000
219 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
221 #define CONFIG_SYS_NAND_CSPR_EXT (0x0)
223 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
227 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
228 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
229 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
230 | CSOR_NAND_ECC_MODE_8 /* 8-bit ECC */ \
231 | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \
232 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \
233 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \
234 | CSOR_NAND_PB(64)) /* 64 Pages Per Block */
236 #define CONFIG_SYS_NAND_ONFI_DETECTION
238 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \
239 FTIM0_NAND_TWP(0x18) | \
240 FTIM0_NAND_TWCHT(0x7) | \
242 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
243 FTIM1_NAND_TWBE(0x39) | \
244 FTIM1_NAND_TRR(0xe) | \
245 FTIM1_NAND_TRP(0x18))
246 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \
247 FTIM2_NAND_TREH(0xa) | \
248 FTIM2_NAND_TWHRE(0x1e))
249 #define CONFIG_SYS_NAND_FTIM3 0x0
251 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
252 #define CONFIG_SYS_MAX_NAND_DEVICE 1
253 #define CONFIG_MTD_NAND_VERIFY_WRITE
255 #define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024)
258 #ifdef CONFIG_NAND_BOOT
259 #define CONFIG_SPL_PAD_TO 0x40000 /* block aligned */
260 #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
261 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10)
264 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
265 #define CONFIG_QIXIS_I2C_ACCESS
266 #define CONFIG_SYS_I2C_EARLY_INIT
272 #define CONFIG_FSL_QIXIS
274 #ifdef CONFIG_FSL_QIXIS
275 #define QIXIS_BASE 0x7fb00000
276 #define QIXIS_BASE_PHYS QIXIS_BASE
277 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66
278 #define QIXIS_LBMAP_SWITCH 6
279 #define QIXIS_LBMAP_MASK 0x0f
280 #define QIXIS_LBMAP_SHIFT 0
281 #define QIXIS_LBMAP_DFLTBANK 0x00
282 #define QIXIS_LBMAP_ALTBANK 0x04
283 #define QIXIS_LBMAP_NAND 0x09
284 #define QIXIS_LBMAP_SD 0x00
285 #define QIXIS_LBMAP_SD_QSPI 0xff
286 #define QIXIS_LBMAP_QSPI 0xff
287 #define QIXIS_RCW_SRC_NAND 0x110
288 #define QIXIS_RCW_SRC_SD 0x040
289 #define QIXIS_RCW_SRC_QSPI 0x045
290 #define QIXIS_RST_CTL_RESET 0x41
291 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
292 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21
293 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
295 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
296 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
300 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
301 #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
302 CSOR_NOR_NOR_MODE_AVD_NOR | \
306 * QIXIS Timing parameters for IFC GPCM
308 #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xc) | \
309 FTIM0_GPCM_TEADC(0x20) | \
310 FTIM0_GPCM_TEAHC(0x10))
311 #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0x50) | \
312 FTIM1_GPCM_TRAD(0x1f))
313 #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0x8) | \
314 FTIM2_GPCM_TCH(0x8) | \
315 FTIM2_GPCM_TWP(0xf0))
316 #define CONFIG_SYS_FPGA_FTIM3 0x0
319 #ifdef CONFIG_NAND_BOOT
320 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
321 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
322 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
323 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
324 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
325 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
326 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
327 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
328 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
329 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR
330 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
331 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
332 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
333 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
334 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
335 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
336 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT
337 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR
338 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
339 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
340 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
341 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
342 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
343 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
344 #define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT
345 #define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR
346 #define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK
347 #define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR
348 #define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0
349 #define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
350 #define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
351 #define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
353 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
354 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
355 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
356 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
357 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
358 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
359 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
360 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
361 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT
362 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR
363 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
364 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
365 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
366 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
367 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
368 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
369 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
370 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
371 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
372 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
373 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
374 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
375 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
376 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
377 #define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT
378 #define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR
379 #define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK
380 #define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR
381 #define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0
382 #define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
383 #define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
384 #define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
388 * I2C bus multiplexer
390 #define I2C_MUX_PCA_ADDR_PRI 0x77
391 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */
392 #define I2C_RETIMER_ADDR 0x18
393 #define I2C_MUX_CH_DEFAULT 0x8
394 #define I2C_MUX_CH_CH7301 0xC
395 #define I2C_MUX_CH5 0xD
396 #define I2C_MUX_CH6 0xE
397 #define I2C_MUX_CH7 0xF
399 #define I2C_MUX_CH_VOL_MONITOR 0xa
401 /* Voltage monitor on channel 2*/
402 #define I2C_VOL_MONITOR_ADDR 0x40
403 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
404 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1
405 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3
407 #define CONFIG_VID_FLS_ENV "ls1046aqds_vdd_mv"
408 #ifndef CONFIG_SPL_BUILD
411 #define CONFIG_VOL_MONITOR_IR36021_SET
412 #define CONFIG_VOL_MONITOR_INA220
413 /* The lowest and highest voltage allowed for LS1046AQDS */
414 #define VDD_MV_MIN 819
415 #define VDD_MV_MAX 1212
418 * Miscellaneous configurable options
420 #define CONFIG_MISC_INIT_R
421 #define CONFIG_SYS_LONGHELP /* undef to save memory */
422 #define CONFIG_AUTO_COMPLETE
423 #define CONFIG_SYS_PBSIZE \
424 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
425 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
427 #define CONFIG_SYS_MEMTEST_START 0x80000000
428 #define CONFIG_SYS_MEMTEST_END 0x9fffffff
430 #define CONFIG_SYS_HZ 1000
432 #define CONFIG_SYS_INIT_SP_OFFSET \
433 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
435 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
440 #define CONFIG_ENV_OVERWRITE
442 #ifdef CONFIG_NAND_BOOT
443 #define CONFIG_ENV_SIZE 0x2000
444 #define CONFIG_ENV_OFFSET (24 * CONFIG_SYS_NAND_BLOCK_SIZE)
445 #elif defined(CONFIG_SD_BOOT)
446 #define CONFIG_ENV_OFFSET (3 * 1024 * 1024)
447 #define CONFIG_SYS_MMC_ENV_DEV 0
448 #define CONFIG_ENV_SIZE 0x2000
449 #elif defined(CONFIG_QSPI_BOOT)
450 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */
451 #define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
452 #define CONFIG_ENV_SECT_SIZE 0x10000
454 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000)
455 #define CONFIG_ENV_SECT_SIZE 0x20000
456 #define CONFIG_ENV_SIZE 0x20000
459 #define CONFIG_CMDLINE_TAG
461 #undef CONFIG_BOOTCOMMAND
462 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
463 #define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \
464 "e0000 f00000 && bootm $kernel_load"
466 #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
467 "$kernel_size && bootm $kernel_load"
470 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
471 #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:2m(uboot)," \
474 #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:" \
475 "2m@0x100000(nor_bank0_uboot),"\
476 "40m@0x1100000(nor_bank0_fit)," \
477 "7m(nor_bank0_user)," \
478 "2m@0x4100000(nor_bank4_uboot)," \
479 "40m@0x5100000(nor_bank4_fit),"\
480 "-(nor_bank4_user);" \
482 "4m(nand_uboot),36m(nand_kernel)," \
483 "472m(nand_free);spi0.0:2m(uboot)," \
487 #include <asm/fsl_secure_boot.h>
489 #endif /* __LS1046AQDS_H__ */