include/configs/ls1046a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  * Copyright 2019-2021 NXP
   5  */
   6
   7 #ifndef __LS1046A_COMMON_H
   8 #define __LS1046A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_QBMAN
  13 #define SPL_NO_FMAN
  14 #define SPL_NO_ENV
  15 #define SPL_NO_MISC
  16 #define SPL_NO_QSPI
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #endif
  20 #if defined(CONFIG_SPL_BUILD) && \
  21         (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
  22 #define SPL_NO_MMC
  23 #endif
  24 #if defined(CONFIG_SPL_BUILD)           && \
  25         !defined(CONFIG_SPL_FSL_LS_PPA)
  26 #define SPL_NO_IFC
  27 #endif
  28
  29 #include <asm/arch/config.h>
  30 #include <asm/arch/stream_id_lsch2.h>
  31
  32 /* Link Definitions */
  33
  34 #define CFG_SYS_DDR_SDRAM_BASE  0x80000000
  35 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY  0
  36 #define CFG_SYS_SDRAM_BASE              CFG_SYS_DDR_SDRAM_BASE
  37 #define CFG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  38
  39 #define CPU_RELEASE_ADDR               secondary_boot_addr
  40
  41 /* Serial Port */
  42 #define CFG_SYS_NS16550_CLK          (get_serial_clock())
  43
  44 /* NAND SPL */
  45 #ifdef CONFIG_NAND_BOOT
  46 #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
  47 #define CFG_SYS_NAND_U_BOOT_START       CONFIG_TEXT_BASE
  48 #endif
  49
  50 /* GPIO */
  51
  52 /* I2C */
  53
  54 /* FMan ucode */
  55 #ifndef SPL_NO_FMAN
  56 #ifdef CONFIG_SYS_DPAA_FMAN
  57 #define CFG_SYS_FM_MURAM_SIZE   0x60000
  58 #endif
  59 #endif
  60
  61 /* Miscellaneous configurable options */
  62
  63 #define HWCONFIG_BUFFER_SIZE            128
  64
  65 #define BOOT_TARGET_DEVICES(func) \
  66         func(SCSI, scsi, 0) \
  67         func(MMC, mmc, 0) \
  68         func(USB, usb, 0) \
  69         func(DHCP, dhcp, na)
  70 #include <config_distro_bootcmd.h>
  71
  72 #if defined(CONFIG_TARGET_LS1046AFRWY)
  73 #define LS1046A_BOOT_SRC_AND_HDR\
  74         "boot_scripts=ls1046afrwy_boot.scr\0"   \
  75         "boot_script_hdr=hdr_ls1046afrwy_bs.out\0"
  76 #elif defined(CONFIG_TARGET_LS1046AQDS)
  77 #define LS1046A_BOOT_SRC_AND_HDR\
  78         "boot_scripts=ls1046aqds_boot.scr\0"    \
  79         "boot_script_hdr=hdr_ls1046aqds_bs.out\0"
  80 #else
  81 #define LS1046A_BOOT_SRC_AND_HDR\
  82         "boot_scripts=ls1046ardb_boot.scr\0"    \
  83         "boot_script_hdr=hdr_ls1046ardb_bs.out\0"
  84 #endif
  85 #ifndef SPL_NO_MISC
  86 /* Initial environment variables */
  87 #define CFG_EXTRA_ENV_SETTINGS          \
  88         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
  89         "ramdisk_addr=0x800000\0"               \
  90         "ramdisk_size=0x2000000\0"              \
  91         "bootm_size=0x10000000\0"               \
  92         "kernel_addr=0x61000000\0"              \
  93         "scriptaddr=0x80000000\0"               \
  94         "scripthdraddr=0x80080000\0"            \
  95         "fdtheader_addr_r=0x80100000\0"         \
  96         "kernelheader_addr_r=0x80200000\0"      \
  97         "load_addr=0xa0000000\0"            \
  98         "kernel_addr_r=0x81000000\0"            \
  99         "fdt_addr_r=0x90000000\0"               \
 100         "ramdisk_addr_r=0xa0000000\0"           \
 101         "kernel_start=0x1000000\0"              \
 102         "kernelheader_start=0x600000\0"         \
 103         "kernel_load=0xa0000000\0"              \
 104         "kernel_size=0x2800000\0"               \
 105         "kernelheader_size=0x40000\0"           \
 106         "kernel_addr_sd=0x8000\0"               \
 107         "kernel_size_sd=0x14000\0"              \
 108         "kernelhdr_addr_sd=0x3000\0"            \
 109         "kernelhdr_size_sd=0x10\0"              \
 110         "console=ttyS0,115200\0"                \
 111          CONFIG_MTDPARTS_DEFAULT "\0"           \
 112         BOOTENV                                 \
 113         LS1046A_BOOT_SRC_AND_HDR                \
 114         "scan_dev_for_boot_part="               \
 115                 "part list ${devtype} ${devnum} devplist; "   \
 116                 "env exists devplist || setenv devplist 1; "  \
 117                 "for distro_bootpart in ${devplist}; do "     \
 118                   "if fstype ${devtype} "                  \
 119                         "${devnum}:${distro_bootpart} "      \
 120                         "bootfstype; then "                  \
 121                         "run scan_dev_for_boot; "            \
 122                   "fi; "                                   \
 123                 "done\0"                                   \
 124         "boot_a_script="                                  \
 125                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 126                         "${scriptaddr} ${prefix}${script}; "    \
 127                 "env exists secureboot && load ${devtype} "     \
 128                         "${devnum}:${distro_bootpart} "         \
 129                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 130                         "env exists secureboot "        \
 131                         "&& esbc_validate ${scripthdraddr};"    \
 132                 "source ${scriptaddr}\0"          \
 133         "qspi_bootcmd=echo Trying load from qspi..;"      \
 134                 "sf probe && sf read $load_addr "         \
 135                 "$kernel_start $kernel_size; env exists secureboot "    \
 136                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 137                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 138                 "bootm $load_addr#$board\0"             \
 139         "nand_bootcmd=echo Trying load from nand..;"      \
 140                 "nand info; nand read $load_addr "         \
 141                 "$kernel_start $kernel_size; env exists secureboot "    \
 142                 "&& nand read $kernelheader_addr_r $kernelheader_start " \
 143                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 144                 "bootm $load_addr#$board\0"             \
 145         "nor_bootcmd=echo Trying load from nor..;"      \
 146                 "cp.b $kernel_addr $load_addr "         \
 147                 "$kernel_size; env exists secureboot "  \
 148                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 149                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 150                 "bootm $load_addr#$board\0"     \
 151         "sd_bootcmd=echo Trying load from SD ..;"       \
 152                 "mmcinfo; mmc read $load_addr "         \
 153                 "$kernel_addr_sd $kernel_size_sd && "   \
 154                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 155                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 156                 " && esbc_validate ${kernelheader_addr_r};"     \
 157                 "bootm $load_addr#$board\0"
 158
 159 #endif
 160
 161 #include <asm/arch/soc.h>
 162
 163 #endif /* __LS1046A_COMMON_H */