include/configs/ls1046a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  * Copyright 2019-2021 NXP
   5  */
   6
   7 #ifndef __LS1046A_COMMON_H
   8 #define __LS1046A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_QBMAN
  13 #define SPL_NO_FMAN
  14 #define SPL_NO_ENV
  15 #define SPL_NO_MISC
  16 #define SPL_NO_QSPI
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #endif
  20 #if defined(CONFIG_SPL_BUILD) && \
  21         (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
  22 #define SPL_NO_MMC
  23 #endif
  24 #if defined(CONFIG_SPL_BUILD)           && \
  25         !defined(CONFIG_SPL_FSL_LS_PPA)
  26 #define SPL_NO_IFC
  27 #endif
  28
  29 #include <asm/arch/config.h>
  30 #include <asm/arch/stream_id_lsch2.h>
  31
  32 /* Link Definitions */
  33
  34 #define CONFIG_VERY_BIG_RAM
  35 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  36 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY  0
  37 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  38 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  39
  40 #define CPU_RELEASE_ADDR               secondary_boot_addr
  41
  42 /* Serial Port */
  43 #define CFG_SYS_NS16550_CLK          (get_serial_clock())
  44
  45 /* SD boot SPL */
  46 #ifdef CONFIG_SD_BOOT
  47 #ifdef CONFIG_NXP_ESBC
  48 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  49 /*
  50  * HDR would be appended at end of image and copied to DDR along
  51  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  52  * size increases then increase this size in case of secure boot as
  53  * it uses raw u-boot image instead of fit image.
  54  */
  55 #endif /* ifdef CONFIG_NXP_ESBC */
  56 #endif
  57
  58 /* NAND SPL */
  59 #ifdef CONFIG_NAND_BOOT
  60 #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
  61 #define CFG_SYS_NAND_U_BOOT_START       CONFIG_TEXT_BASE
  62 #endif
  63
  64 /* GPIO */
  65
  66 /* I2C */
  67
  68 /* SATA */
  69 #ifndef SPL_NO_SATA
  70 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  71 #endif
  72
  73 /* FMan ucode */
  74 #ifndef SPL_NO_FMAN
  75 #define CONFIG_SYS_DPAA_FMAN
  76 #ifdef CONFIG_SYS_DPAA_FMAN
  77 #define CONFIG_SYS_FM_MURAM_SIZE        0x60000
  78 #endif
  79 #endif
  80
  81 /* Miscellaneous configurable options */
  82
  83 #define CONFIG_HWCONFIG
  84 #define HWCONFIG_BUFFER_SIZE            128
  85
  86 #define BOOT_TARGET_DEVICES(func) \
  87         func(SCSI, scsi, 0) \
  88         func(MMC, mmc, 0) \
  89         func(USB, usb, 0) \
  90         func(DHCP, dhcp, na)
  91 #include <config_distro_bootcmd.h>
  92
  93 #if defined(CONFIG_TARGET_LS1046AFRWY)
  94 #define LS1046A_BOOT_SRC_AND_HDR\
  95         "boot_scripts=ls1046afrwy_boot.scr\0"   \
  96         "boot_script_hdr=hdr_ls1046afrwy_bs.out\0"
  97 #elif defined(CONFIG_TARGET_LS1046AQDS)
  98 #define LS1046A_BOOT_SRC_AND_HDR\
  99         "boot_scripts=ls1046aqds_boot.scr\0"    \
 100         "boot_script_hdr=hdr_ls1046aqds_bs.out\0"
 101 #else
 102 #define LS1046A_BOOT_SRC_AND_HDR\
 103         "boot_scripts=ls1046ardb_boot.scr\0"    \
 104         "boot_script_hdr=hdr_ls1046ardb_bs.out\0"
 105 #endif
 106 #ifndef SPL_NO_MISC
 107 /* Initial environment variables */
 108 #define CONFIG_EXTRA_ENV_SETTINGS               \
 109         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 110         "ramdisk_addr=0x800000\0"               \
 111         "ramdisk_size=0x2000000\0"              \
 112         "bootm_size=0x10000000\0"               \
 113         "kernel_addr=0x61000000\0"              \
 114         "scriptaddr=0x80000000\0"               \
 115         "scripthdraddr=0x80080000\0"            \
 116         "fdtheader_addr_r=0x80100000\0"         \
 117         "kernelheader_addr_r=0x80200000\0"      \
 118         "load_addr=0xa0000000\0"            \
 119         "kernel_addr_r=0x81000000\0"            \
 120         "fdt_addr_r=0x90000000\0"               \
 121         "ramdisk_addr_r=0xa0000000\0"           \
 122         "kernel_start=0x1000000\0"              \
 123         "kernelheader_start=0x600000\0"         \
 124         "kernel_load=0xa0000000\0"              \
 125         "kernel_size=0x2800000\0"               \
 126         "kernelheader_size=0x40000\0"           \
 127         "kernel_addr_sd=0x8000\0"               \
 128         "kernel_size_sd=0x14000\0"              \
 129         "kernelhdr_addr_sd=0x3000\0"            \
 130         "kernelhdr_size_sd=0x10\0"              \
 131         "console=ttyS0,115200\0"                \
 132          CONFIG_MTDPARTS_DEFAULT "\0"           \
 133         BOOTENV                                 \
 134         LS1046A_BOOT_SRC_AND_HDR                \
 135         "scan_dev_for_boot_part="               \
 136                 "part list ${devtype} ${devnum} devplist; "   \
 137                 "env exists devplist || setenv devplist 1; "  \
 138                 "for distro_bootpart in ${devplist}; do "     \
 139                   "if fstype ${devtype} "                  \
 140                         "${devnum}:${distro_bootpart} "      \
 141                         "bootfstype; then "                  \
 142                         "run scan_dev_for_boot; "            \
 143                   "fi; "                                   \
 144                 "done\0"                                   \
 145         "boot_a_script="                                  \
 146                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 147                         "${scriptaddr} ${prefix}${script}; "    \
 148                 "env exists secureboot && load ${devtype} "     \
 149                         "${devnum}:${distro_bootpart} "         \
 150                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 151                         "env exists secureboot "        \
 152                         "&& esbc_validate ${scripthdraddr};"    \
 153                 "source ${scriptaddr}\0"          \
 154         "qspi_bootcmd=echo Trying load from qspi..;"      \
 155                 "sf probe && sf read $load_addr "         \
 156                 "$kernel_start $kernel_size; env exists secureboot "    \
 157                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 158                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 159                 "bootm $load_addr#$board\0"             \
 160         "nand_bootcmd=echo Trying load from nand..;"      \
 161                 "nand info; nand read $load_addr "         \
 162                 "$kernel_start $kernel_size; env exists secureboot "    \
 163                 "&& nand read $kernelheader_addr_r $kernelheader_start " \
 164                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 165                 "bootm $load_addr#$board\0"             \
 166         "nor_bootcmd=echo Trying load from nor..;"      \
 167                 "cp.b $kernel_addr $load_addr "         \
 168                 "$kernel_size; env exists secureboot "  \
 169                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 170                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 171                 "bootm $load_addr#$board\0"     \
 172         "sd_bootcmd=echo Trying load from SD ..;"       \
 173                 "mmcinfo; mmc read $load_addr "         \
 174                 "$kernel_addr_sd $kernel_size_sd && "   \
 175                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 176                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 177                 " && esbc_validate ${kernelheader_addr_r};"     \
 178                 "bootm $load_addr#$board\0"
 179
 180 #endif
 181
 182 #include <asm/arch/soc.h>
 183
 184 #endif /* __LS1046A_COMMON_H */