include/configs/ls1046a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  * Copyright 2019-2021 NXP
   5  */
   6
   7 #ifndef __LS1046A_COMMON_H
   8 #define __LS1046A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_QBMAN
  13 #define SPL_NO_FMAN
  14 #define SPL_NO_ENV
  15 #define SPL_NO_MISC
  16 #define SPL_NO_QSPI
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #endif
  20 #if defined(CONFIG_SPL_BUILD) && \
  21         (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
  22 #define SPL_NO_MMC
  23 #endif
  24 #if defined(CONFIG_SPL_BUILD)           && \
  25         !defined(CONFIG_SPL_FSL_LS_PPA)
  26 #define SPL_NO_IFC
  27 #endif
  28
  29 #include <asm/arch/config.h>
  30 #include <asm/arch/stream_id_lsch2.h>
  31
  32 /* Link Definitions */
  33
  34 #define CFG_SYS_DDR_SDRAM_BASE  0x80000000
  35 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY  0
  36 #define CFG_SYS_SDRAM_BASE              CFG_SYS_DDR_SDRAM_BASE
  37 #define CFG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  38
  39 #define CPU_RELEASE_ADDR               secondary_boot_addr
  40
  41 /* Serial Port */
  42 #define CFG_SYS_NS16550_CLK          (get_serial_clock())
  43
  44 /* SD boot SPL */
  45 #ifdef CONFIG_SD_BOOT
  46 #ifdef CONFIG_NXP_ESBC
  47 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  48 /*
  49  * HDR would be appended at end of image and copied to DDR along
  50  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  51  * size increases then increase this size in case of secure boot as
  52  * it uses raw u-boot image instead of fit image.
  53  */
  54 #endif /* ifdef CONFIG_NXP_ESBC */
  55 #endif
  56
  57 /* NAND SPL */
  58 #ifdef CONFIG_NAND_BOOT
  59 #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
  60 #define CFG_SYS_NAND_U_BOOT_START       CONFIG_TEXT_BASE
  61 #endif
  62
  63 /* GPIO */
  64
  65 /* I2C */
  66
  67 /* FMan ucode */
  68 #ifndef SPL_NO_FMAN
  69 #ifdef CONFIG_SYS_DPAA_FMAN
  70 #define CFG_SYS_FM_MURAM_SIZE   0x60000
  71 #endif
  72 #endif
  73
  74 /* Miscellaneous configurable options */
  75
  76 #define HWCONFIG_BUFFER_SIZE            128
  77
  78 #define BOOT_TARGET_DEVICES(func) \
  79         func(SCSI, scsi, 0) \
  80         func(MMC, mmc, 0) \
  81         func(USB, usb, 0) \
  82         func(DHCP, dhcp, na)
  83 #include <config_distro_bootcmd.h>
  84
  85 #if defined(CONFIG_TARGET_LS1046AFRWY)
  86 #define LS1046A_BOOT_SRC_AND_HDR\
  87         "boot_scripts=ls1046afrwy_boot.scr\0"   \
  88         "boot_script_hdr=hdr_ls1046afrwy_bs.out\0"
  89 #elif defined(CONFIG_TARGET_LS1046AQDS)
  90 #define LS1046A_BOOT_SRC_AND_HDR\
  91         "boot_scripts=ls1046aqds_boot.scr\0"    \
  92         "boot_script_hdr=hdr_ls1046aqds_bs.out\0"
  93 #else
  94 #define LS1046A_BOOT_SRC_AND_HDR\
  95         "boot_scripts=ls1046ardb_boot.scr\0"    \
  96         "boot_script_hdr=hdr_ls1046ardb_bs.out\0"
  97 #endif
  98 #ifndef SPL_NO_MISC
  99 /* Initial environment variables */
 100 #define CONFIG_EXTRA_ENV_SETTINGS               \
 101         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 102         "ramdisk_addr=0x800000\0"               \
 103         "ramdisk_size=0x2000000\0"              \
 104         "bootm_size=0x10000000\0"               \
 105         "kernel_addr=0x61000000\0"              \
 106         "scriptaddr=0x80000000\0"               \
 107         "scripthdraddr=0x80080000\0"            \
 108         "fdtheader_addr_r=0x80100000\0"         \
 109         "kernelheader_addr_r=0x80200000\0"      \
 110         "load_addr=0xa0000000\0"            \
 111         "kernel_addr_r=0x81000000\0"            \
 112         "fdt_addr_r=0x90000000\0"               \
 113         "ramdisk_addr_r=0xa0000000\0"           \
 114         "kernel_start=0x1000000\0"              \
 115         "kernelheader_start=0x600000\0"         \
 116         "kernel_load=0xa0000000\0"              \
 117         "kernel_size=0x2800000\0"               \
 118         "kernelheader_size=0x40000\0"           \
 119         "kernel_addr_sd=0x8000\0"               \
 120         "kernel_size_sd=0x14000\0"              \
 121         "kernelhdr_addr_sd=0x3000\0"            \
 122         "kernelhdr_size_sd=0x10\0"              \
 123         "console=ttyS0,115200\0"                \
 124          CONFIG_MTDPARTS_DEFAULT "\0"           \
 125         BOOTENV                                 \
 126         LS1046A_BOOT_SRC_AND_HDR                \
 127         "scan_dev_for_boot_part="               \
 128                 "part list ${devtype} ${devnum} devplist; "   \
 129                 "env exists devplist || setenv devplist 1; "  \
 130                 "for distro_bootpart in ${devplist}; do "     \
 131                   "if fstype ${devtype} "                  \
 132                         "${devnum}:${distro_bootpart} "      \
 133                         "bootfstype; then "                  \
 134                         "run scan_dev_for_boot; "            \
 135                   "fi; "                                   \
 136                 "done\0"                                   \
 137         "boot_a_script="                                  \
 138                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 139                         "${scriptaddr} ${prefix}${script}; "    \
 140                 "env exists secureboot && load ${devtype} "     \
 141                         "${devnum}:${distro_bootpart} "         \
 142                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 143                         "env exists secureboot "        \
 144                         "&& esbc_validate ${scripthdraddr};"    \
 145                 "source ${scriptaddr}\0"          \
 146         "qspi_bootcmd=echo Trying load from qspi..;"      \
 147                 "sf probe && sf read $load_addr "         \
 148                 "$kernel_start $kernel_size; env exists secureboot "    \
 149                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 150                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 151                 "bootm $load_addr#$board\0"             \
 152         "nand_bootcmd=echo Trying load from nand..;"      \
 153                 "nand info; nand read $load_addr "         \
 154                 "$kernel_start $kernel_size; env exists secureboot "    \
 155                 "&& nand read $kernelheader_addr_r $kernelheader_start " \
 156                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 157                 "bootm $load_addr#$board\0"             \
 158         "nor_bootcmd=echo Trying load from nor..;"      \
 159                 "cp.b $kernel_addr $load_addr "         \
 160                 "$kernel_size; env exists secureboot "  \
 161                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 162                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 163                 "bootm $load_addr#$board\0"     \
 164         "sd_bootcmd=echo Trying load from SD ..;"       \
 165                 "mmcinfo; mmc read $load_addr "         \
 166                 "$kernel_addr_sd $kernel_size_sd && "   \
 167                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 168                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 169                 " && esbc_validate ${kernelheader_addr_r};"     \
 170                 "bootm $load_addr#$board\0"
 171
 172 #endif
 173
 174 #include <asm/arch/soc.h>
 175
 176 #endif /* __LS1046A_COMMON_H */