include/configs/ls1046a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  * Copyright 2019 NXP
   5  */
   6
   7 #ifndef __LS1046A_COMMON_H
   8 #define __LS1046A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_QBMAN
  13 #define SPL_NO_FMAN
  14 #define SPL_NO_ENV
  15 #define SPL_NO_MISC
  16 #define SPL_NO_QSPI
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #endif
  20 #if defined(CONFIG_SPL_BUILD) && \
  21         (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
  22 #define SPL_NO_MMC
  23 #endif
  24 #if defined(CONFIG_SPL_BUILD)           && \
  25         !defined(CONFIG_SPL_FSL_LS_PPA)
  26 #define SPL_NO_IFC
  27 #endif
  28
  29 #define CONFIG_REMAKE_ELF
  30 #define CONFIG_GICV2
  31
  32 #include <asm/arch/config.h>
  33 #include <asm/arch/stream_id_lsch2.h>
  34
  35 /* Link Definitions */
  36 #ifdef CONFIG_TFABOOT
  37 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  38 #else
  39 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  40 #endif
  41
  42 #define CONFIG_SKIP_LOWLEVEL_INIT
  43
  44 #define CONFIG_VERY_BIG_RAM
  45 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  46 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  47 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  48 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  49
  50 #define CPU_RELEASE_ADDR               secondary_boot_func
  51
  52 /* Generic Timer Definitions */
  53 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  54
  55 /* Size of malloc() pool */
  56 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  57
  58 /* Serial Port */
  59 #define CONFIG_SYS_NS16550_SERIAL
  60 #define CONFIG_SYS_NS16550_REG_SIZE     1
  61 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  62
  63 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  64
  65 /* SD boot SPL */
  66 #ifdef CONFIG_SD_BOOT
  67 #define CONFIG_SPL_MAX_SIZE             0x1f000         /* 124 KiB */
  68 #define CONFIG_SPL_STACK                0x10020000
  69 #define CONFIG_SPL_PAD_TO               0x21000         /* 132 KiB */
  70 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
  71 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  72 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  73                                         CONFIG_SPL_BSS_MAX_SIZE)
  74 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  75
  76 #ifdef CONFIG_SECURE_BOOT
  77 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  78 /*
  79  * HDR would be appended at end of image and copied to DDR along
  80  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  81  * size increases then increase this size in case of secure boot as
  82  * it uses raw u-boot image instead of fit image.
  83  */
  84 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  85 #else
  86 #define CONFIG_SYS_MONITOR_LEN          0x100000
  87 #endif /* ifdef CONFIG_SECURE_BOOT */
  88 #endif
  89
  90 #if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
  91 #define CONFIG_SPL_TARGET               "spl/u-boot-spl.pbl"
  92 #define CONFIG_SPL_MAX_SIZE             0x1f000
  93 #define CONFIG_SPL_STACK                0x10020000
  94 #define CONFIG_SPL_PAD_TO               0x20000
  95 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
  96 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  97 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  98                                         CONFIG_SPL_BSS_MAX_SIZE)
  99 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 100 #define CONFIG_SYS_MONITOR_LEN          0x100000
 101 #define CONFIG_SYS_UBOOT_START          CONFIG_SYS_TEXT_BASE
 102 #endif
 103
 104 /* NAND SPL */
 105 #ifdef CONFIG_NAND_BOOT
 106 #define CONFIG_SPL_PBL_PAD
 107 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 108 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 109 #define CONFIG_SPL_ENV_SUPPORT
 110 #define CONFIG_SPL_WATCHDOG_SUPPORT
 111 #define CONFIG_SPL_I2C_SUPPORT
 112 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 113
 114 #define CONFIG_SPL_NAND_SUPPORT
 115 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 116 #define CONFIG_SPL_MAX_SIZE             0x17000         /* 90 KiB */
 117 #define CONFIG_SPL_STACK                0x1001f000
 118 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 119 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 120
 121 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
 122 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 123 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
 124                                         CONFIG_SPL_BSS_MAX_SIZE)
 125 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 126 #define CONFIG_SYS_MONITOR_LEN          0xa0000
 127 #endif
 128
 129 /* I2C */
 130 #define CONFIG_SYS_I2C
 131
 132 /* PCIe */
 133 #define CONFIG_PCIE1            /* PCIE controller 1 */
 134 #define CONFIG_PCIE2            /* PCIE controller 2 */
 135 #define CONFIG_PCIE3            /* PCIE controller 3 */
 136
 137 #ifdef CONFIG_PCI
 138 #define CONFIG_PCI_SCAN_SHOW
 139 #endif
 140
 141 /* SATA */
 142 #ifndef SPL_NO_SATA
 143 #define CONFIG_SCSI_AHCI_PLAT
 144
 145 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
 146
 147 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
 148 #define CONFIG_SYS_SCSI_MAX_LUN                 1
 149 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 150                                                 CONFIG_SYS_SCSI_MAX_LUN)
 151 #endif
 152
 153 /* Command line configuration */
 154
 155 /* MMC */
 156 #ifndef SPL_NO_MMC
 157 #ifdef CONFIG_MMC
 158 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 159 #endif
 160 #endif
 161
 162 /* FMan ucode */
 163 #ifndef SPL_NO_FMAN
 164 #define CONFIG_SYS_DPAA_FMAN
 165 #ifdef CONFIG_SYS_DPAA_FMAN
 166 #define CONFIG_SYS_FM_MURAM_SIZE        0x60000
 167 #endif
 168
 169 #ifdef CONFIG_TFABOOT
 170 #define CONFIG_SYS_FMAN_FW_ADDR         0x900000
 171 #else
 172 #ifdef CONFIG_SD_BOOT
 173 /*
 174  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 175  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 176  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800).
 177  */
 178 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x4800)
 179 #elif defined(CONFIG_QSPI_BOOT)
 180 #define CONFIG_SYS_FMAN_FW_ADDR         0x40900000
 181 #elif defined(CONFIG_NAND_BOOT)
 182 #define CONFIG_SYS_FMAN_FW_ADDR         (36 * CONFIG_SYS_NAND_BLOCK_SIZE)
 183 #else
 184 #define CONFIG_SYS_FMAN_FW_ADDR         0x60900000
 185 #endif
 186 #endif
 187 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 188 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 189 #endif
 190
 191 /* Miscellaneous configurable options */
 192 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 193
 194 #define CONFIG_HWCONFIG
 195 #define HWCONFIG_BUFFER_SIZE            128
 196
 197 #ifndef CONFIG_SPL_BUILD
 198 #define BOOT_TARGET_DEVICES(func) \
 199         func(SCSI, scsi, 0) \
 200         func(MMC, mmc, 0) \
 201         func(USB, usb, 0) \
 202         func(DHCP, dhcp, na)
 203 #include <config_distro_bootcmd.h>
 204 #endif
 205
 206 #if defined(CONFIG_TARGET_LS1046AFRWY)
 207 #define LS1046A_BOOT_SRC_AND_HDR\
 208         "boot_scripts=ls1046afrwy_boot.scr\0"   \
 209         "boot_script_hdr=hdr_ls1046afrwy_bs.out\0"
 210 #else
 211 #define LS1046A_BOOT_SRC_AND_HDR\
 212         "boot_scripts=ls1046ardb_boot.scr\0"    \
 213         "boot_script_hdr=hdr_ls1046ardb_bs.out\0"
 214 #endif
 215 #ifndef SPL_NO_MISC
 216 /* Initial environment variables */
 217 #define CONFIG_EXTRA_ENV_SETTINGS               \
 218         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 219         "ramdisk_addr=0x800000\0"               \
 220         "ramdisk_size=0x2000000\0"              \
 221         "fdt_high=0xffffffffffffffff\0"         \
 222         "initrd_high=0xffffffffffffffff\0"      \
 223         "fdt_addr=0x64f00000\0"                 \
 224         "kernel_addr=0x65000000\0"              \
 225         "scriptaddr=0x80000000\0"               \
 226         "scripthdraddr=0x80080000\0"            \
 227         "fdtheader_addr_r=0x80100000\0"         \
 228         "kernelheader_addr_r=0x80200000\0"      \
 229         "load_addr=0xa0000000\0"            \
 230         "kernel_addr_r=0x81000000\0"            \
 231         "fdt_addr_r=0x90000000\0"               \
 232         "ramdisk_addr_r=0xa0000000\0"           \
 233         "kernel_start=0x1000000\0"              \
 234         "kernelheader_start=0x800000\0"         \
 235         "kernel_load=0xa0000000\0"              \
 236         "kernel_size=0x2800000\0"               \
 237         "kernelheader_size=0x40000\0"           \
 238         "kernel_addr_sd=0x8000\0"               \
 239         "kernel_size_sd=0x14000\0"              \
 240         "kernelhdr_addr_sd=0x4000\0"            \
 241         "kernelhdr_size_sd=0x10\0"              \
 242         "console=ttyS0,115200\0"                \
 243          CONFIG_MTDPARTS_DEFAULT "\0"           \
 244         BOOTENV                                 \
 245         LS1046A_BOOT_SRC_AND_HDR                \
 246         "scan_dev_for_boot_part="               \
 247                 "part list ${devtype} ${devnum} devplist; "   \
 248                 "env exists devplist || setenv devplist 1; "  \
 249                 "for distro_bootpart in ${devplist}; do "     \
 250                   "if fstype ${devtype} "                  \
 251                         "${devnum}:${distro_bootpart} "      \
 252                         "bootfstype; then "                  \
 253                         "run scan_dev_for_boot; "            \
 254                   "fi; "                                   \
 255                 "done\0"                                   \
 256         "boot_a_script="                                  \
 257                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 258                         "${scriptaddr} ${prefix}${script}; "    \
 259                 "env exists secureboot && load ${devtype} "     \
 260                         "${devnum}:${distro_bootpart} "         \
 261                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 262                         "env exists secureboot "        \
 263                         "&& esbc_validate ${scripthdraddr};"    \
 264                 "source ${scriptaddr}\0"          \
 265         "qspi_bootcmd=echo Trying load from qspi..;"      \
 266                 "sf probe && sf read $load_addr "         \
 267                 "$kernel_start $kernel_size; env exists secureboot "    \
 268                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 269                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 270                 "bootm $load_addr#$board\0"             \
 271         "sd_bootcmd=echo Trying load from SD ..;"       \
 272                 "mmcinfo; mmc read $load_addr "         \
 273                 "$kernel_addr_sd $kernel_size_sd && "   \
 274                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 275                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 276                 " && esbc_validate ${kernelheader_addr_r};"     \
 277                 "bootm $load_addr#$board\0"
 278
 279 #endif
 280
 281 /* Monitor Command Prompt */
 282 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 283
 284 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 285
 286 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 287
 288 #include <asm/arch/soc.h>
 289
 290 #endif /* __LS1046A_COMMON_H */