include/configs/ls1046a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  * Copyright 2019-2020 NXP
   5  */
   6
   7 #ifndef __LS1046A_COMMON_H
   8 #define __LS1046A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_QBMAN
  13 #define SPL_NO_FMAN
  14 #define SPL_NO_ENV
  15 #define SPL_NO_MISC
  16 #define SPL_NO_QSPI
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #undef CONFIG_DM_I2C
  20 #endif
  21 #if defined(CONFIG_SPL_BUILD) && \
  22         (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
  23 #define SPL_NO_MMC
  24 #endif
  25 #if defined(CONFIG_SPL_BUILD)           && \
  26         !defined(CONFIG_SPL_FSL_LS_PPA)
  27 #define SPL_NO_IFC
  28 #endif
  29
  30 #define CONFIG_REMAKE_ELF
  31 #define CONFIG_GICV2
  32
  33 #include <asm/arch/config.h>
  34 #include <asm/arch/stream_id_lsch2.h>
  35
  36 /* Link Definitions */
  37 #ifdef CONFIG_TFABOOT
  38 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  39 #else
  40 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  41 #endif
  42
  43 #define CONFIG_SKIP_LOWLEVEL_INIT
  44
  45 #define CONFIG_VERY_BIG_RAM
  46 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  47 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  48 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  49 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  50
  51 #define CPU_RELEASE_ADDR               secondary_boot_func
  52
  53 /* Generic Timer Definitions */
  54 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  55
  56 /* Size of malloc() pool */
  57 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  58
  59 /* Serial Port */
  60 #define CONFIG_SYS_NS16550_SERIAL
  61 #define CONFIG_SYS_NS16550_REG_SIZE     1
  62 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  63
  64 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  65
  66 /* SD boot SPL */
  67 #ifdef CONFIG_SD_BOOT
  68 #define CONFIG_SPL_MAX_SIZE             0x1f000         /* 124 KiB */
  69 #define CONFIG_SPL_STACK                0x10020000
  70 #define CONFIG_SPL_PAD_TO               0x21000         /* 132 KiB */
  71 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
  72 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  73 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  74                                         CONFIG_SPL_BSS_MAX_SIZE)
  75 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  76
  77 #ifdef CONFIG_NXP_ESBC
  78 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  79 /*
  80  * HDR would be appended at end of image and copied to DDR along
  81  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  82  * size increases then increase this size in case of secure boot as
  83  * it uses raw u-boot image instead of fit image.
  84  */
  85 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  86 #else
  87 #define CONFIG_SYS_MONITOR_LEN          0x100000
  88 #endif /* ifdef CONFIG_NXP_ESBC */
  89 #endif
  90
  91 #if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
  92 #define CONFIG_SPL_TARGET               "spl/u-boot-spl.pbl"
  93 #define CONFIG_SPL_MAX_SIZE             0x1f000
  94 #define CONFIG_SPL_STACK                0x10020000
  95 #define CONFIG_SPL_PAD_TO               0x20000
  96 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
  97 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  98 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  99                                         CONFIG_SPL_BSS_MAX_SIZE)
 100 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 101 #define CONFIG_SYS_MONITOR_LEN          0x100000
 102 #endif
 103
 104 /* NAND SPL */
 105 #ifdef CONFIG_NAND_BOOT
 106 #define CONFIG_SPL_PBL_PAD
 107 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 108 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 109 #define CONFIG_SPL_ENV_SUPPORT
 110 #define CONFIG_SPL_WATCHDOG_SUPPORT
 111 #define CONFIG_SPL_I2C_SUPPORT
 112 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 113
 114 #define CONFIG_SPL_NAND_SUPPORT
 115 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 116 #define CONFIG_SPL_MAX_SIZE             0x17000         /* 90 KiB */
 117 #define CONFIG_SPL_STACK                0x1001f000
 118 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 119 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 120
 121 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
 122 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 123 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
 124                                         CONFIG_SPL_BSS_MAX_SIZE)
 125 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 126 #define CONFIG_SYS_MONITOR_LEN          0xa0000
 127 #endif
 128
 129 /* I2C */
 130 #ifndef CONFIG_DM_I2C
 131 #define CONFIG_SYS_I2C
 132 #define CONFIG_SYS_I2C_MXC
 133 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 134 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 135 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 136 #define CONFIG_SYS_I2C_MXC_I2C4         /* enable I2C bus 4 */
 137 #else
 138 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
 139 #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
 140 #endif
 141
 142 /* PCIe */
 143 #define CONFIG_PCIE1            /* PCIE controller 1 */
 144 #define CONFIG_PCIE2            /* PCIE controller 2 */
 145 #define CONFIG_PCIE3            /* PCIE controller 3 */
 146
 147 #ifdef CONFIG_PCI
 148 #define CONFIG_PCI_SCAN_SHOW
 149 #endif
 150
 151 /* SATA */
 152 #ifndef SPL_NO_SATA
 153 #define CONFIG_SCSI_AHCI_PLAT
 154
 155 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
 156
 157 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
 158 #define CONFIG_SYS_SCSI_MAX_LUN                 1
 159 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 160                                                 CONFIG_SYS_SCSI_MAX_LUN)
 161 #endif
 162
 163 /* Command line configuration */
 164
 165 /* MMC */
 166 #ifndef SPL_NO_MMC
 167 #ifdef CONFIG_MMC
 168 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 169 #endif
 170 #endif
 171
 172 /* FMan ucode */
 173 #ifndef SPL_NO_FMAN
 174 #define CONFIG_SYS_DPAA_FMAN
 175 #ifdef CONFIG_SYS_DPAA_FMAN
 176 #define CONFIG_SYS_FM_MURAM_SIZE        0x60000
 177 #endif
 178
 179 #ifdef CONFIG_TFABOOT
 180 #define CONFIG_SYS_FMAN_FW_ADDR         0x900000
 181 #else
 182 #ifdef CONFIG_SD_BOOT
 183 /*
 184  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 185  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 186  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800).
 187  */
 188 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x4800)
 189 #elif defined(CONFIG_QSPI_BOOT)
 190 #define CONFIG_SYS_FMAN_FW_ADDR         0x40900000
 191 #elif defined(CONFIG_NAND_BOOT)
 192 #define CONFIG_SYS_FMAN_FW_ADDR         (36 * CONFIG_SYS_NAND_BLOCK_SIZE)
 193 #else
 194 #define CONFIG_SYS_FMAN_FW_ADDR         0x60900000
 195 #endif
 196 #endif
 197 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 198 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 199 #endif
 200
 201 /* Miscellaneous configurable options */
 202 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 203
 204 #define CONFIG_HWCONFIG
 205 #define HWCONFIG_BUFFER_SIZE            128
 206
 207 #ifndef CONFIG_SPL_BUILD
 208 #define BOOT_TARGET_DEVICES(func) \
 209         func(SCSI, scsi, 0) \
 210         func(MMC, mmc, 0) \
 211         func(USB, usb, 0) \
 212         func(DHCP, dhcp, na)
 213 #include <config_distro_bootcmd.h>
 214 #endif
 215
 216 #if defined(CONFIG_TARGET_LS1046AFRWY)
 217 #define LS1046A_BOOT_SRC_AND_HDR\
 218         "boot_scripts=ls1046afrwy_boot.scr\0"   \
 219         "boot_script_hdr=hdr_ls1046afrwy_bs.out\0"
 220 #elif defined(CONFIG_TARGET_LS1046AQDS)
 221 #define LS1046A_BOOT_SRC_AND_HDR\
 222         "boot_scripts=ls1046aqds_boot.scr\0"    \
 223         "boot_script_hdr=hdr_ls1046aqds_bs.out\0"
 224 #else
 225 #define LS1046A_BOOT_SRC_AND_HDR\
 226         "boot_scripts=ls1046ardb_boot.scr\0"    \
 227         "boot_script_hdr=hdr_ls1046ardb_bs.out\0"
 228 #endif
 229 #ifndef SPL_NO_MISC
 230 /* Initial environment variables */
 231 #define CONFIG_EXTRA_ENV_SETTINGS               \
 232         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 233         "ramdisk_addr=0x800000\0"               \
 234         "ramdisk_size=0x2000000\0"              \
 235         "bootm_size=0x10000000\0"               \
 236         "fdt_addr=0x64f00000\0"                 \
 237         "kernel_addr=0x61000000\0"              \
 238         "scriptaddr=0x80000000\0"               \
 239         "scripthdraddr=0x80080000\0"            \
 240         "fdtheader_addr_r=0x80100000\0"         \
 241         "kernelheader_addr_r=0x80200000\0"      \
 242         "load_addr=0xa0000000\0"            \
 243         "kernel_addr_r=0x81000000\0"            \
 244         "fdt_addr_r=0x90000000\0"               \
 245         "ramdisk_addr_r=0xa0000000\0"           \
 246         "kernel_start=0x1000000\0"              \
 247         "kernelheader_start=0x600000\0"         \
 248         "kernel_load=0xa0000000\0"              \
 249         "kernel_size=0x2800000\0"               \
 250         "kernelheader_size=0x40000\0"           \
 251         "kernel_addr_sd=0x8000\0"               \
 252         "kernel_size_sd=0x14000\0"              \
 253         "kernelhdr_addr_sd=0x3000\0"            \
 254         "kernelhdr_size_sd=0x10\0"              \
 255         "console=ttyS0,115200\0"                \
 256          CONFIG_MTDPARTS_DEFAULT "\0"           \
 257         BOOTENV                                 \
 258         LS1046A_BOOT_SRC_AND_HDR                \
 259         "scan_dev_for_boot_part="               \
 260                 "part list ${devtype} ${devnum} devplist; "   \
 261                 "env exists devplist || setenv devplist 1; "  \
 262                 "for distro_bootpart in ${devplist}; do "     \
 263                   "if fstype ${devtype} "                  \
 264                         "${devnum}:${distro_bootpart} "      \
 265                         "bootfstype; then "                  \
 266                         "run scan_dev_for_boot; "            \
 267                   "fi; "                                   \
 268                 "done\0"                                   \
 269         "boot_a_script="                                  \
 270                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 271                         "${scriptaddr} ${prefix}${script}; "    \
 272                 "env exists secureboot && load ${devtype} "     \
 273                         "${devnum}:${distro_bootpart} "         \
 274                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 275                         "env exists secureboot "        \
 276                         "&& esbc_validate ${scripthdraddr};"    \
 277                 "source ${scriptaddr}\0"          \
 278         "qspi_bootcmd=echo Trying load from qspi..;"      \
 279                 "sf probe && sf read $load_addr "         \
 280                 "$kernel_start $kernel_size; env exists secureboot "    \
 281                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 282                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 283                 "bootm $load_addr#$board\0"             \
 284         "nand_bootcmd=echo Trying load from nand..;"      \
 285                 "nand info; nand read $load_addr "         \
 286                 "$kernel_start $kernel_size; env exists secureboot "    \
 287                 "&& nand read $kernelheader_addr_r $kernelheader_start " \
 288                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 289                 "bootm $load_addr#$board\0"             \
 290         "nor_bootcmd=echo Trying load from nor..;"      \
 291                 "cp.b $kernel_addr $load_addr "         \
 292                 "$kernel_size; env exists secureboot "  \
 293                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 294                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 295                 "bootm $load_addr#$board\0"     \
 296         "sd_bootcmd=echo Trying load from SD ..;"       \
 297                 "mmcinfo; mmc read $load_addr "         \
 298                 "$kernel_addr_sd $kernel_size_sd && "   \
 299                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 300                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 301                 " && esbc_validate ${kernelheader_addr_r};"     \
 302                 "bootm $load_addr#$board\0"
 303
 304 #endif
 305
 306 /* Monitor Command Prompt */
 307 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 308
 309 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 310
 311 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 312
 313 #include <asm/arch/soc.h>
 314
 315 #endif /* __LS1046A_COMMON_H */