api: Convert to Kconfig
[platform/kernel/u-boot.git] / include / configs / ls1043aqds.h
1 /*
2  * Copyright 2015 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __LS1043AQDS_H__
8 #define __LS1043AQDS_H__
9
10 #include "ls1043a_common.h"
11
12 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
13 #define CONFIG_SYS_TEXT_BASE            0x82000000
14 #elif defined(CONFIG_QSPI_BOOT)
15 #define CONFIG_SYS_TEXT_BASE            0x40010000
16 #else
17 #define CONFIG_SYS_TEXT_BASE            0x60100000
18 #endif
19
20 #ifndef __ASSEMBLY__
21 unsigned long get_board_sys_clk(void);
22 unsigned long get_board_ddr_clk(void);
23 #endif
24
25 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
26 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
27
28 #define CONFIG_SKIP_LOWLEVEL_INIT
29
30 #define CONFIG_LAYERSCAPE_NS_ACCESS
31
32 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
33 /* Physical Memory Map */
34 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
35 #define CONFIG_NR_DRAM_BANKS            2
36
37 #define CONFIG_DDR_SPD
38 #define SPD_EEPROM_ADDRESS              0x51
39 #define CONFIG_SYS_SPD_BUS_NUM          0
40
41 #define CONFIG_FSL_DDR_INTERACTIVE      /* Interactive debugging */
42
43 #define CONFIG_DDR_ECC
44 #ifdef CONFIG_DDR_ECC
45 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
46 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
47 #endif
48
49 #ifdef CONFIG_SYS_DPAA_FMAN
50 #define CONFIG_FMAN_ENET
51 #define CONFIG_PHYLIB
52 #define CONFIG_PHY_VITESSE
53 #define CONFIG_PHY_REALTEK
54 #define CONFIG_PHYLIB_10G
55 #define RGMII_PHY1_ADDR         0x1
56 #define RGMII_PHY2_ADDR         0x2
57 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
58 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
59 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
60 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
61 /* PHY address on QSGMII riser card on slot 1 */
62 #define QSGMII_CARD_PORT1_PHY_ADDR_S1 0x4
63 #define QSGMII_CARD_PORT2_PHY_ADDR_S1 0x5
64 #define QSGMII_CARD_PORT3_PHY_ADDR_S1 0x6
65 #define QSGMII_CARD_PORT4_PHY_ADDR_S1 0x7
66 /* PHY address on QSGMII riser card on slot 2 */
67 #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
68 #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
69 #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
70 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
71 #endif
72
73 #ifdef CONFIG_RAMBOOT_PBL
74 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043aqds/ls1043aqds_pbi.cfg
75 #endif
76
77 #ifdef CONFIG_NAND_BOOT
78 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg
79 #endif
80
81 #ifdef CONFIG_SD_BOOT
82 #ifdef CONFIG_SD_BOOT_QSPI
83 #define CONFIG_SYS_FSL_PBL_RCW \
84         board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg
85 #else
86 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
87 #endif
88 #endif
89
90 /* LPUART */
91 #ifdef CONFIG_LPUART
92 #define CONFIG_LPUART_32B_REG
93 #endif
94
95 /* SATA */
96 #define CONFIG_LIBATA
97 #define CONFIG_SCSI_AHCI
98 #define CONFIG_SCSI_AHCI_PLAT
99 #define CONFIG_SCSI
100
101 /* EEPROM */
102 #define CONFIG_ID_EEPROM
103 #define CONFIG_SYS_I2C_EEPROM_NXID
104 #define CONFIG_SYS_EEPROM_BUS_NUM               0
105 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
106 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
107 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
108 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
109
110 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
111
112 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
113 #define CONFIG_SYS_SCSI_MAX_LUN                 1
114 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
115                                                 CONFIG_SYS_SCSI_MAX_LUN)
116
117 /*
118  * IFC Definitions
119  */
120 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
121 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
122 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
123                                 CSPR_PORT_SIZE_16 | \
124                                 CSPR_MSEL_NOR | \
125                                 CSPR_V)
126 #define CONFIG_SYS_NOR1_CSPR_EXT        (0x0)
127 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
128                                 + 0x8000000) | \
129                                 CSPR_PORT_SIZE_16 | \
130                                 CSPR_MSEL_NOR | \
131                                 CSPR_V)
132 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
133
134 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
135                                         CSOR_NOR_TRHZ_80)
136 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
137                                         FTIM0_NOR_TEADC(0x5) | \
138                                         FTIM0_NOR_TEAHC(0x5))
139 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
140                                         FTIM1_NOR_TRAD_NOR(0x1a) | \
141                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
142 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
143                                         FTIM2_NOR_TCH(0x4) | \
144                                         FTIM2_NOR_TWPH(0xe) | \
145                                         FTIM2_NOR_TWP(0x1c))
146 #define CONFIG_SYS_NOR_FTIM3            0
147
148 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
149 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
150 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
151 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
152
153 #define CONFIG_SYS_FLASH_EMPTY_INFO
154 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS, \
155                                         CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
156
157 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
158 #define CONFIG_SYS_WRITE_SWAPPED_DATA
159
160 /*
161  * NAND Flash Definitions
162  */
163 #define CONFIG_NAND_FSL_IFC
164
165 #define CONFIG_SYS_NAND_BASE            0x7e800000
166 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
167
168 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
169
170 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
171                                 | CSPR_PORT_SIZE_8      \
172                                 | CSPR_MSEL_NAND        \
173                                 | CSPR_V)
174 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
175 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
176                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
177                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
178                                 | CSOR_NAND_RAL_3       /* RAL = 3 Bytes */ \
179                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
180                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */ \
181                                 | CSOR_NAND_PB(64))     /* 64 Pages Per Block */
182
183 #define CONFIG_SYS_NAND_ONFI_DETECTION
184
185 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x7) | \
186                                         FTIM0_NAND_TWP(0x18)   | \
187                                         FTIM0_NAND_TWCHT(0x7) | \
188                                         FTIM0_NAND_TWH(0xa))
189 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
190                                         FTIM1_NAND_TWBE(0x39)  | \
191                                         FTIM1_NAND_TRR(0xe)   | \
192                                         FTIM1_NAND_TRP(0x18))
193 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0xf) | \
194                                         FTIM2_NAND_TREH(0xa) | \
195                                         FTIM2_NAND_TWHRE(0x1e))
196 #define CONFIG_SYS_NAND_FTIM3           0x0
197
198 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
199 #define CONFIG_SYS_MAX_NAND_DEVICE      1
200 #define CONFIG_MTD_NAND_VERIFY_WRITE
201 #define CONFIG_CMD_NAND
202
203 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
204 #endif
205
206 #ifdef CONFIG_NAND_BOOT
207 #define CONFIG_SPL_PAD_TO               0x20000         /* block aligned */
208 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
209 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (640 << 10)
210 #endif
211
212 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
213 #define CONFIG_QIXIS_I2C_ACCESS
214 #define CONFIG_SYS_I2C_EARLY_INIT
215 #define CONFIG_SYS_NO_FLASH
216 #endif
217
218 /*
219  * QIXIS Definitions
220  */
221 #define CONFIG_FSL_QIXIS
222
223 #ifdef CONFIG_FSL_QIXIS
224 #define QIXIS_BASE                      0x7fb00000
225 #define QIXIS_BASE_PHYS                 QIXIS_BASE
226 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
227 #define QIXIS_LBMAP_SWITCH              6
228 #define QIXIS_LBMAP_MASK                0x0f
229 #define QIXIS_LBMAP_SHIFT               0
230 #define QIXIS_LBMAP_DFLTBANK            0x00
231 #define QIXIS_LBMAP_ALTBANK             0x04
232 #define QIXIS_LBMAP_NAND                0x09
233 #define QIXIS_LBMAP_SD                  0x00
234 #define QIXIS_LBMAP_SD_QSPI             0xff
235 #define QIXIS_LBMAP_QSPI                0xff
236 #define QIXIS_RCW_SRC_NAND              0x106
237 #define QIXIS_RCW_SRC_SD                0x040
238 #define QIXIS_RCW_SRC_QSPI              0x045
239 #define QIXIS_RST_CTL_RESET             0x41
240 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
241 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
242 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
243
244 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
245 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
246                                         CSPR_PORT_SIZE_8 | \
247                                         CSPR_MSEL_GPCM | \
248                                         CSPR_V)
249 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
250 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
251                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
252                                         CSOR_NOR_TRHZ_80)
253
254 /*
255  * QIXIS Timing parameters for IFC GPCM
256  */
257 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xc) | \
258                                         FTIM0_GPCM_TEADC(0x20) | \
259                                         FTIM0_GPCM_TEAHC(0x10))
260 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0x50) | \
261                                         FTIM1_GPCM_TRAD(0x1f))
262 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0x8) | \
263                                         FTIM2_GPCM_TCH(0x8) | \
264                                         FTIM2_GPCM_TWP(0xf0))
265 #define CONFIG_SYS_FPGA_FTIM3           0x0
266 #endif
267
268 #ifdef CONFIG_NAND_BOOT
269 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
270 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
271 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
272 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
273 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
274 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
275 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
276 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
277 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
278 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
279 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
280 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
281 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
282 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
283 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
284 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
285 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
286 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
287 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
288 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
289 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
290 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
291 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
292 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
293 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
294 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
295 #define CONFIG_SYS_AMASK3               CONFIG_SYS_FPGA_AMASK
296 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
297 #define CONFIG_SYS_CS3_FTIM0            CONFIG_SYS_FPGA_FTIM0
298 #define CONFIG_SYS_CS3_FTIM1            CONFIG_SYS_FPGA_FTIM1
299 #define CONFIG_SYS_CS3_FTIM2            CONFIG_SYS_FPGA_FTIM2
300 #define CONFIG_SYS_CS3_FTIM3            CONFIG_SYS_FPGA_FTIM3
301 #else
302 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
303 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
304 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
305 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
306 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
307 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
308 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
309 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
310 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
311 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
312 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
313 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
314 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
315 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
316 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
317 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
318 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
319 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
320 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
321 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
322 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
323 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
324 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
325 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
326 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
327 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
328 #define CONFIG_SYS_AMASK3               CONFIG_SYS_FPGA_AMASK
329 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
330 #define CONFIG_SYS_CS3_FTIM0            CONFIG_SYS_FPGA_FTIM0
331 #define CONFIG_SYS_CS3_FTIM1            CONFIG_SYS_FPGA_FTIM1
332 #define CONFIG_SYS_CS3_FTIM2            CONFIG_SYS_FPGA_FTIM2
333 #define CONFIG_SYS_CS3_FTIM3            CONFIG_SYS_FPGA_FTIM3
334 #endif
335
336 /*
337  * I2C bus multiplexer
338  */
339 #define I2C_MUX_PCA_ADDR_PRI            0x77
340 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
341 #define I2C_RETIMER_ADDR                0x18
342 #define I2C_MUX_CH_DEFAULT              0x8
343 #define I2C_MUX_CH_CH7301               0xC
344 #define I2C_MUX_CH5                     0xD
345 #define I2C_MUX_CH7                     0xF
346
347 #define I2C_MUX_CH_VOL_MONITOR 0xa
348
349 /* Voltage monitor on channel 2*/
350 #define I2C_VOL_MONITOR_ADDR           0x40
351 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
352 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
353 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
354
355 #define CONFIG_VID_FLS_ENV              "ls1043aqds_vdd_mv"
356 #ifndef CONFIG_SPL_BUILD
357 #define CONFIG_VID
358 #endif
359 #define CONFIG_VOL_MONITOR_IR36021_SET
360 #define CONFIG_VOL_MONITOR_INA220
361 /* The lowest and highest voltage allowed for LS1043AQDS */
362 #define VDD_MV_MIN                      819
363 #define VDD_MV_MAX                      1212
364
365 /* QSPI device */
366 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
367 #define CONFIG_FSL_QSPI
368 #ifdef CONFIG_FSL_QSPI
369 #define CONFIG_SPI_FLASH_SPANSION
370 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
371 #define FSL_QSPI_FLASH_NUM              2
372 #endif
373 #endif
374
375 /* USB */
376 #define CONFIG_HAS_FSL_XHCI_USB
377 #ifdef CONFIG_HAS_FSL_XHCI_USB
378 #define CONFIG_USB_XHCI_FSL
379 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
380 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
381 #endif
382
383 /*
384  * Miscellaneous configurable options
385  */
386 #define CONFIG_MISC_INIT_R
387 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
388 #define CONFIG_AUTO_COMPLETE
389 #define CONFIG_SYS_PBSIZE               \
390                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
391 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
392
393 #define CONFIG_SYS_MEMTEST_START        0x80000000
394 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
395
396 #define CONFIG_SYS_HZ                   1000
397
398 /*
399  * Stack sizes
400  * The stack sizes are set up in start.S using the settings below
401  */
402 #define CONFIG_STACKSIZE                (30 * 1024)
403
404 #define CONFIG_SYS_INIT_SP_OFFSET \
405         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
406
407 #ifdef CONFIG_SPL_BUILD
408 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
409 #else
410 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
411 #endif
412
413 /*
414  * Environment
415  */
416 #define CONFIG_ENV_OVERWRITE
417
418 #ifdef CONFIG_NAND_BOOT
419 #define CONFIG_ENV_IS_IN_NAND
420 #define CONFIG_ENV_SIZE                 0x2000
421 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
422 #elif defined(CONFIG_SD_BOOT)
423 #define CONFIG_ENV_OFFSET               (1024 * 1024)
424 #define CONFIG_ENV_IS_IN_MMC
425 #define CONFIG_SYS_MMC_ENV_DEV          0
426 #define CONFIG_ENV_SIZE                 0x2000
427 #elif defined(CONFIG_QSPI_BOOT)
428 #define CONFIG_ENV_IS_IN_SPI_FLASH
429 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
430 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
431 #define CONFIG_ENV_SECT_SIZE            0x10000
432 #else
433 #define CONFIG_ENV_IS_IN_FLASH
434 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x200000)
435 #define CONFIG_ENV_SECT_SIZE            0x20000
436 #define CONFIG_ENV_SIZE                 0x20000
437 #endif
438
439 #define CONFIG_CMDLINE_TAG
440
441 #include <asm/fsl_secure_boot.h>
442
443 #endif /* __LS1043AQDS_H__ */